DS1687-5IND+
Product Specifications
DS1687-5IND+
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The DS1687-5IND+ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
DS1687-5IND+: A Real-Time Clock With the Battery and the Crystal Inside the Package
The DS1687-5IND+ is a real-time clock in an encapsulated dual in line module that contains the die, a 32.768 kHz crystal and a lithium cell in one package, so the board needs no crystal, no load capacitors and no battery holder. It provides the industry standard DS1287 clock function with a century register, a date alarm register, a 64-bit silicon serial number, 242 bytes of battery-backed non-volatile RAM, a 32 kHz output for power management, a crystal select bit for 6 pF or 12.5 pF crystals, an auxiliary battery input, a RAM clear input, an SMI recovery stack, power control circuitry that can start the system from a date and time alarm or a key closure, and leap year compensation valid through 2099. This order code is the 5 V version on the industrial temperature grade; the DS1685 is the chip without the embedded cell.
The part exists because a battery and a crystal on a board are two components with their own failure modes, their own placement rules and their own leakage paths. Putting both inside the package removes the placement problem, and it also removes the ability to replace the cell.
The battery is part of the order code, and that is a repair question
Because the cell is inside the module, the service life of the part is the service life of the clock. A board that has been in the field for fifteen years has a module whose cell is at or past the end of its capacity, and a replacement module bought today starts that clock again from zero. The auxiliary battery input allows an external cell to keep the time and the RAM alive, which is the option used where a longer life than the internal cell can provide is required, but the internal cell cannot be disconnected or replaced.
For repair work this changes the procurement question. A customer asking for a DS1687 is usually asking for a module that will keep time for another product lifetime, and a part from a broker with unknown storage history is a part with an unknown remaining cell life. The date code matters as much as the electrical specification, which is unusual for a semiconductor and normal for a module with a battery in it.
| Function | Real-time clock compatible with the DS1287, Y2K compliant |
| Memory | 242 bytes of battery-backed RAM, 1936 bits |
| Serial number | 64 bits, 16 hexadecimal digits, unique per part |
| Calendar | Century register, date alarm, leap year through 2099 |
| Crystal | Inside the module, selectable for 6 pF or 12.5 pF types |
| Output | 32.768 kHz for power management, a 30.5 us period |
| Power control | Wake from a date and time alarm or a key closure |
| Auxiliary input | External cell can hold time and RAM, the internal cell cannot be replaced |
| Supply | 5 V on this order code, 3 V on the DS1687-3 |
| Package | Encapsulated DIP with embedded cell and crystal, industrial temperature grade |
Two hundred and forty two bytes is the whole non-volatile store
In a product of this generation the 242 bytes of battery-backed RAM were the configuration store: calibration constants, a serial number, a run hour counter and the setup menu all lived there, because the alternative was an EEPROM with its own write cycle limit. A repair that replaces the module therefore erases the instrument's identity unless the contents were copied first, and that is a step no data sheet mentions. Reading the RAM through the same interface that reads the clock is the only way to keep it, and it has to be done before the part is pulled.
The 64-bit serial number is the other feature that matters in service. It allows a board to be identified without a label, and it is readable over the same bus, so an instrument that reports its own serial number can be matched to its calibration record after a repair. Where the serial number lives only in this module, replacing the module changes the identity of the instrument unless the new serial is recorded and the record is updated.
Two questions buyers ask
What is the difference between the DS1685 and the DS1687?
The DS1685 is the same clock as a chip, with the crystal and the battery supplied separately on the board, and the DS1687 is the encapsulated module with both inside. The register set and the interface are the same, so a board can be moved from one to the other only if the board changes to add the crystal and the cell, which is a board revision rather than a substitution.
What happens when the internal cell is exhausted?
The clock stops and the battery-backed RAM loses its contents, while the part continues to answer on the bus with a stopped clock. That is the worst failure mode to diagnose from the outside, because the interface works and only the time is wrong, and it is why the auxiliary battery input exists for products that need a life longer than the internal cell.
Ordering and supply
The -5 suffix is the 5 V version and IND is the industrial temperature grade. Traps in this family are the supply voltage, the module versus chip choice and the age of the stock. A 3 V part in a 5 V socket is outside its rating, a chip cannot fill a module footprint, and a module that has been in storage for a decade has less cell life left than its date code suggests. For production and for repair we ask for the date code before quoting.
We hold and source this family for production and for repair lots. Start at the analog mixed signal ICs family page, compare a candidate against the pin to pin cross reference, and where a clock module has to be replaced in an instrument, the order in how to verify a drop in replacement starts with reading the battery-backed RAM before the old part comes out.
Request Quote — In Stock, 100% New & Original, Full Warranty