Contact Us

ADV7180BSTZ

Brand: Analog Devices
Analog Devices ADV7180BSTZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADV7180BSTZ — Analog & Mixed-Signal ICs | Superb Automation

ADV7180BSTZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADV7180BSTZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADV7180BSTZ: six input SDTV decoder with an 8 or 16 bit output

The ADV7180BSTZ is the 64-lead LQFP member of the standard definition decoder family, with six analogue inputs, an output that can run 8-bit or 16-bit, and the same -40 to +85 C screen. It is the code for a box that has to accept several video sources without an external multiplexer, and the 16-bit output is what makes a higher precision path possible on the digital side.

Published values

ParameterValue
FunctionNTSC, PAL and SECAM decoder with automatic standard detection
ADCOne 10-bit converter, 4 times oversampling on composite, 2 times on Y/C and YPrPb
Analogue inputsSix on this package
Output8-bit or 16-bit, ITU-R BT.656 YCrCb 4:2:2
Comb filteringFive line adaptive comb filter with CTI and DNR
Time baseAdaptive digital line length tracking
VBIData slicer with teletext support
Copy protectionMacrovision detection
Supply1.8 V analogue, PLL and digital, 1.8 V to 3.3 V I/O
Package64-lead LQFP, option ST-64-2
Temperature-40 C to +85 C
Automotive versionADV7180WBSTZ in the same body, rated -40 to +125 C

Six inputs without a multiplexer is the reason to take this package

Every input pair costs pins, and the 64-lead body is where the six analogue channels fit with the 16-bit output bus. On a set top box or a monitor with several connectors, that removes a multiplexer, its control lines and the crosstalk it brings. On a single camera board it is board area spent on nothing.

The automatic standard detection covers NTSC, PAL and SECAM without a configuration table per region, which matters for a product shipped to several markets from one build. The decoder reports what it found, so the firmware can adapt its scaling rather than assume a line count.

8-bit or 16-bit output, and what the wider bus is for

The 16-bit mode puts the full precision of the internal path on the digital side instead of truncating to 8 bits at the pin. Whether that is visible depends on what follows: a scaler or a capture engine that works in 10 or 12 bits can use it, a display that takes BT.656 cannot.

The wider bus also costs 8 more traces and a different timing relationship with the clock, so a board that has already been laid out for the 8-bit path cannot simply switch modes. The decision belongs with the interface, not with the decoder.

Two pages worth reading before a purchase order goes out are the ADC and DAC cross reference and the obsolete part cross reference hub; the first lists what else fits the socket, the second is the test sequence for a drop in, and component lead time solutions covers the case where the shortage is already on the line.

Two questions buyers ask

What does this package give over the 32-lead version? Six analogue inputs instead of three, an output that can run 16-bit as well as 8-bit, and a larger body to fit them in. The decoder core and the register set are the same.

Is the firmware portable between the packages? The register set is shared across the family, so the configuration moves. What does not move is the pinout, the input count and the shared VS and FIELD pin on the smaller body.