Contact Us

ADUM5403ARWZ-RL

Brand: Analog Devices
Analog Devices ADUM5403ARWZ-RL is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADUM5403ARWZ-RL — Analog & Mixed-Signal ICs | Superb Automation

ADUM5403ARWZ-RL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADUM5403ARWZ-RL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADuM5403ARWZ-RL: 500 mW Across the Barrier and a 105 C Ceiling

The ADuM5403 is a four channel digital isolator with an integrated isolated dc to dc converter, sold under the vendor name isoPower. It delivers up to 500 mW of regulated isolated power at 5.0 V or 3.3 V from a 5 V input, or at 3.3 V from a 3.3 V supply, alongside four signal channels rated dc to 25 Mbps. The isolation rating is 2500 V rms under UL 1577 with a working voltage of 560 V peak, transient immunity is above 25 kV per microsecond, and the package is a 16-lead SOIC with 7.6 mm of creepage. This order code carries one channel in one direction and three in the other.

The power budget read from both ends

500 mW is 100 mA at 5 V or 152 mA at 3.3 V, which is enough for a transceiver, a sensor front end and a small processor on the isolated side. The converter removes the separate isolated supply, its transformer, its feedback path and its own isolation barrier from the bill of materials, and that is the trade the part is sold on. On the signal side, 25 Mbps corresponds to a 40 ns bit period.

The 105 C ceiling is what the converter costs

ParameterValue
Channels and direction4 channels, 1 forward and 3 reverse
Isolated powerup to 500 mW, regulated
Output voltage3.3 V or 5.0 V from a 5 V input, 3.3 V from a 3.3 V supply
Data ratedc to 25 Mbps NRZ
Isolation rating2500 V rms for 1 minute, UL 1577
Working voltageVIORM 560 V peak
Transient immunityabove 25 kV per microsecond
Creepage7.6 mm, 16-lead SOIC
Maximum temperature105 C

A plain digital isolator in the same family line is rated to 125 C, so putting the converter inside the package costs 20 C of ceiling. At 105 C the part is at 84 percent of that 125 C limit. For a cabinet at 70 C ambient with a 30 C rise inside the enclosure there are about 5 C left, and that margin is the first thing to check before the part is chosen for a sealed enclosure.

Emissions are a board question, not a part question

The converter switches at high frequency to push power through the transformer, and the vendor directs readers to its application note on the subject for board recommendations. Two consequences follow for a buyer: the isolated supply is not a drop-in for a linear regulator on the same copper, and a review of the barrier area on the board is part of the qualification, not an afterthought. The 7.6 mm creepage and the 2500 V rms rating are related but separate requirements, one mechanical and one electrical.

Direction variants in the same family

The four members of this family differ in channel direction, not in power: one version has all four channels forward, one splits them two and two, this one runs one forward and three reverse, and the fourth runs all four in reverse. Choosing the variant is a matter of counting the signals that actually cross the barrier, and a quotation should name the variant rather than the family.

Selection notes

  • One package replaces an isolator plus an isolated supply plus its feedback arrangement.
  • Regulated output means no post regulator is needed for a logic rail on the isolated side.
  • Working voltage of 560 V peak is the continuous rating; the 2500 V rms figure is a one minute test.
  • The 105 C maximum applies to the whole part, converter included.

Buyer questions

Can it make 5 V from a 3.3 V input? No. The 5 V output comes from a 5 V input. From a 3.3 V supply the regulated output is 3.3 V, at reduced power.

Does the isolated side need its own ground plane? Yes. The barrier is a real boundary for copper as well as for signals, and the creepage figure only holds if the isolated side is kept clear of the primary side on every layer.

Family page for the category: Analog and mixed-signal ICs. For power devices see power management cross reference, and for lead time planning on isolated parts see component lead time solutions.

ADuM5403ARWZ-RL: seven point six millimetres of creepage, and a test voltage is not a working voltage

The body is a 16-lead SOIC with 7.6 mm of creepage, which is the physical number a safety review starts from, and the approvals list carries three different figures that are routinely confused: UL recognition at 2500 V rms for one minute, a VDE working voltage of 560 V peak, and a CQC certificate to GB4943.1. The 2500 V rms is a one minute withstand test and the 560 V peak is the voltage the insulation may see continuously, so a 600 V bus is outside the part even though a short test would pass it.

ItemPublished valueArithmetic or consequence
Creepage7.6 mm, 16-lead SOICThe body, not the die, sets the safety distance
UL2500 V rms for one minuteA withstand test, not a continuous rating
VDE working voltage560 V peakA 400 V three phase bus at 566 V peak is at the limit
Isolated powerUp to 500 mW at 3.3 V or 5 V out500 mW at 5 V is 100 mA, and the converter is inside the part
ChannelsFour, one direction of three and one of oneThe dominant direction is set by the code, not by the wiring
Data rate25 Mbps non return to zeroA 40 ns bit period, ten times the usual field bus
Temperature105 C maximumThe integrated converter is what sets that ceiling

The converter inside the part is why the ceiling is 105 C

A plain digital isolator of the same family is rated to 125 C, and the versions with integrated power stop at 105 C because the dc to dc converter dissipates inside the same body. A cabinet that runs at 100 C ambient leaves 5 C for the converter loss, which is not a lot, so the thermal calculation for an isolated power rail is done on the isolator rather than on the load. Running the same part at 125 C is outside its rating regardless of the load current.

Isolated power removes a converter but not the emissions question

Integrating the converter saves a separate isolated supply and its transformer, and it moves a switching converter onto the barrier where its emissions are inside the same footprint as the signal channels. The 25 kV per microsecond common mode transient immunity describes how the signal path survives a fast transient, not how quiet the converter is, so a board that needs a quiet analog rail still filters the output. That is a board level decision with a part level constraint.

Buying this order code

The direction mix is in the code, so the 1 over 3 channel arrangement is fixed and cannot be rewired. The isolator family is on the analog line card, direction variants are compared on the pin to pin page, and long life programs book reels through the lead time desk.

Request Quote — In Stock, 100% New & Original, Full Warranty