Contact Us

ADUM5000ARWZ-RL

Brand: Analog Devices
Analog Devices ADUM5000ARWZ-RL is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADUM5000ARWZ-RL — Analog & Mixed-Signal ICs | Superb Automation

ADUM5000ARWZ-RL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADUM5000ARWZ-RL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADUM5000ARWZ-RL: 500 mW across a 2.5 kV barrier from a 16-lead body, at 33 percent efficiency

The ADUM5000ARWZ-RL is an Analog Devices isolated dc-to-dc converter that delivers a regulated 3.3 V or 5 V output at up to 500 mW across an isolation barrier, in a 16-lead SOIC with 7.6 mm of creepage. It uses the iso Power transformer structure, runs to a maximum temperature of 105 C, and includes thermal overload protection. Approvals are UL recognition at 2500 V rms for one minute per UL 1577, a CSA component acceptance notice, and a working voltage of 560 V peak under VDE 0884. Efficiency is up to 33 percent, which is the figure that shapes every application: the part is intended to power a transceiver or a small isolated front end, not a general purpose load. It is on the analog and mixed-signal IC line card.

33 percent efficiency means 1.52 W in for 500 mW out

At full load the input power is 1.52 W, which from a 5 V rail is 303 mA. The output side delivers 100 mA at 5 V or 152 mA at 3.3 V. A reader who sees 500 mW and plans a 5 V 100 mA load from a 5 V rail has to allow for three times that current on the input side, and the input capacitor and the upstream regulator are sized by the 303 mA, not by the 100 mA. The low efficiency is the price of transferring power through a chip scale transformer at a switching frequency high enough to keep the package small, and it is why the isolated supply is sized to the actual load rather than to the headline rating.

ParameterVendor figureDerived figure
Output3.3 V or 5 V regulated, 500 mW100 mA at 5 V, 152 mA at 3.3 V
Efficiencyup to 33 percent1.52 W input, 303 mA from 5 V at full load
Isolation2500 V rms for one minute, UL 15773536 V peak withstand
Working voltage560 V peak, VDE 08846.31 times below the withstand figure
Creepage7.6 mm1.36 mm per 100 V of working voltage
Temperature105 C maximumthermal overload protection is the last resort, not the operating limit
Package16-lead SOICshares the footprint family with the ADuM5000 based isolators

Augmenting another isolator is the intended use

The vendor positions this part as a way to add isolated power to a data isolator that has none, and to increase the power available when the isolator already includes a converter. That is why the output can be tied to the output of an iso Power isolator: the two converters share the load and the combined rating exceeds either alone. Used on its own it powers a single transceiver or a small amplifier; used alongside an isolator it turns a 500 mW budget into something closer to an amp.

Selection notes

  • The switching converter inside radiates, and the vendor publishes an application note on containing it. A part this small running at high frequency needs the recommended stitching and the recommended ferrite if the board must meet an emissions limit.
  • Thermal overload protection shuts the output down, so a load that exceeds 500 mW produces a dropout rather than a fire.
  • The 105 C maximum is lower than the 125 C of the data isolators in the same family, which makes this part the thermal limit of the pair.
  • Output voltage is set by the order code, not by a divider, so the 3.3 V and 5 V versions are separate part numbers.

Questions buyers ask

Can this power a 5 V 200 mA load? No. 500 mW at 5 V is 100 mA, and the part is specified at that output. A larger iso Power part or a discrete isolated converter is needed above it.

Is the isolation rating a working voltage? No. 2500 V rms for one minute is a withstand test, and the continuous working voltage is 560 V peak. Working to the withstand figure is a common and dangerous mistake.

Isolated supplies are bought with their data isolator, and the pairing options are on power management cross reference with the interface family on pin to pin cross reference.

Request Quote — In Stock, 100% New & Original, Full Warranty