ADUM4160BRWZ
Product Specifications
ADUM4160BRWZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADUM4160BRWZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ADuM4160BRWZ: the 5 kV USB isolator for a medical front end
The ADuM4160BRWZ is the 5 kV member of the USB port isolator pair, in a 16-lead wide body SOIC, rated -40 to +105 C and supplied in tubes of 37. It does the same job as the 3160 at 12 Mbps full speed and 1.5 Mbps low speed, but it carries the 60601-1 and 61010 listings that a patient connected port usually needs, and it is available in an enhanced creepage body for boards that have to hold a wider gap.
Published values
| Parameter | Value |
|---|---|
| Function | Upstream facing USB port isolator, USB 2.0 compatible |
| Isolation | UL 1577 5000 V rms for one minute, VIORM 645 V peak |
| Approvals | IEC/EN/CSA 62368-1, IEC/CSA 60601-1, 61010-1, VDE 0884-17 |
| Data rates | 12 Mbps full speed and 1.5 Mbps low speed |
| Bus voltage | 4.5 V to 5.5 V VBUS on either side |
| Upstream supply current | 8 mA maximum at 12 Mbps, 7 mA at 1.5 Mbps, 2.3 mA idle |
| Propagation delay, full speed | 70 ns maximum at 3.3 V |
| Propagation delay, low speed | 325 ns typical |
| ESD | Class 3A contact per ANSI/ESD STM5.1-2007 |
| Packages | RW-16 wide body SOIC, or RI-16-2 with increased creepage |
| Temperature | -40 C to +105 C |
| Protection | Upstream short circuit protection built in |
5 kV against the 2.5 kV sibling, on the same footprint
The 3160 and the 4160 share the RW-16 body, so the higher rating costs no board area. What it does buy is the reinforced insulation listing and the 60601-1 entry, which is the difference between a port a patient can touch and a port that has to stay inside the enclosure. The RI-16-2 option then adds creepage on top of the rating, for a board that has to hold a physical gap as well as a test voltage.
It is easy to overstate what the number means. Five kilovolts rms for one minute is a withstand test on a production sample, not a working voltage. The figure that governs service life is the 645 V peak continuous working voltage, and a board that sits near that line needs the derating checked, not the withstand number quoted in a description.
No suspend mode, and why that matters for a bus powered device
The idle current is 2.3 mA maximum, low enough that the part does not need a suspend state, and 8 mA at full speed is the number the host sees when the link is busy. For a bus powered instrument drawing its budget through the connector, those are the numbers that decide whether the board needs its own supply.
Connection timing is set by the peripheral because the pull-up control is isolated. That matters when the isolated side boots more slowly than the host: the part can hold the bus idle until the far side is ready, instead of letting the host enumerate a device that is not yet listening.
Buyers usually arrive at medical device components to find the family alternatives, then use the pin to pin cross reference to confirm a substitute before it is fitted; how to verify a drop in replacement is the routine for a part that has already stopped shipping.
Two questions buyers ask
Does the 5 kV rating mean the port can be touched? It means the barrier carries a reinforced insulation listing and a 60601-1 entry. Whether a port may be touched depends on the whole barrier and the standard the product is assessed against, not on one component figure.
Does it need a crystal or any configuration? No. VBUS on each side and the isolated pull-up control are the connections that matter. The direction of the bus is detected per packet by the part itself.