Contact Us

ADR5041BRTZ-REEL7

Brand: Analog Devices
Analog Devices ADR5041BRTZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADR5041BRTZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

ADR5041BRTZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADR5041BRTZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADR5041BRTZ-REEL7: A 2.5 V Shunt Reference That Works on 50 Microamps

The ADR5041BRTZ-REEL7 is a 2.5 V shunt mode voltage reference in a SOT-23 or SC70 package, with 0.1 percent initial accuracy, 75 ppm per degree Celsius maximum drift, and an operating current window from 50 uA to 15 mA. It needs no external capacitor, is pin compatible with the LM4040 and LM4050 families, and is qualified for automotive applications. It is the cheapest way to put an accurate 2.5 V node on a board, provided the bias resistor is treated as part of the accuracy calculation.

The bias resistor sets both the accuracy and the current budget

A shunt reference draws its operating current from a series resistor, so the resistor has to supply the reference plus the load across the whole supply range. From a 5 V rail with a 2.5 kohm resistor, the current is 1 mA when the load takes nothing, and the reference absorbs all of it; as the load draws current the reference current falls. At 1 mA of load the reference is starved and the output collapses. The usable load window is therefore the difference between the resistor current at minimum supply and the minimum operating current of 50 uA, and on a +/-5 percent supply that window is much smaller than the headline 15 mA suggests.

What the published figures convert to

ParameterPublished figureWhat it means on a board
Output2.500 VOne code at 12 bits is 610 uV; at 16 bits it is 38.1 uV
Initial accuracyPlus or minus 0.1 percent2.5 mV, which is four 12 bit codes and 66 of a 16 bit code
Temperature coefficient75 ppm per degree Celsius maximum30.9 mV over 165 degrees, twelve times the initial error
Operating current50 uA to 15 mAThe lower limit is what sizes the bias resistor, the upper limit is a thermal limit
Bias resistor from a 5 V rail2.5 kohm for 1 mAA 1 percent resistor adds 1 percent to the reference current, which shifts the operating point, not the output
Power at minimum current125 uW50 uA at 2.5 V, low enough for a permanently biased battery instrument
Power at maximum current37.5 mW15 mA in a SOT-23 needs a copper pad and a check of the thermal derating
Output capacitorNone requiredStable with no capacitor, and tolerant of a decoupling capacitor when one is fitted
CompatibilityPin compatible with LM4040 and LM4050A board built around the older shunt family can take this part without a change
PackageSOT-23 and SC70Two footprints, both smaller than a 1 percent resistor network
Temperature rangeMinus 40 to plus 125 degrees CelsiusFull industrial range, and the automotive grade is a distinct order code

Checks before accepting a cross reference

  • Compare the minimum operating current. A 100 uA part cannot replace a 50 uA part in a low power product without a new resistor.
  • Check the initial accuracy grade. The B grade is 0.1 percent and lower grades are 0.5 percent or worse, and the part number differs by one letter.
  • Verify the drift, not the initial error. The 75 ppm figure dominates every measurement over temperature.
  • Confirm the pin out against the LM4040 variant in use, because the two families share a footprint but not always a pin function.
  • Ask about the noise, which is not the strength of a shunt reference and may need a capacitor or a filter for a high resolution converter.

Where this part is used

Low power data acquisition, portable instruments, battery monitors, comparator thresholds, automotive sensor interfaces and any board where a 2.5 V node is needed and a three terminal series reference is too expensive or draws too much current.

Questions buyers ask

Can it sink current as well as source it? Yes. A shunt reference operates in both directions by definition, which is what allows it to sit on a comparator input that may be pulled either way.

What happens if the bias resistor is too large? The reference never reaches its minimum operating current at low supply, and the output sits below 2.5 V with a poor temperature coefficient. This is the most common assembly error with shunt references.

Is a capacitor allowed on the output? Yes, and unlike some shunt references this one does not become unstable with a small ceramic capacitor. The capacitor does not improve the initial accuracy.

Sourcing notes and next step

The reference is listed with the data conversion support parts on the analog and mixed signal index, and converters it typically feeds are compared in the ADC and DAC cross reference. When a long life product needs a reference that will still be obtainable years from now, the obsolete part cross reference hub explains how the alternatives are qualified. Tell us the supply rail, the load current and the accuracy grade and we will quote the correct suffix.

Request Quote — In Stock, 100% New & Original, Full Warranty