Contact Us

ADP7182AUJZ-R7

Brand: Analog Devices
Analog Devices ADP7182AUJZ-R7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADP7182AUJZ-R7 — Analog & Mixed-Signal ICs | Superb Automation

ADP7182AUJZ-R7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADP7182AUJZ-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADP7182AUJZ-R7: an adjustable negative rail that stops at minus 28 V and 200 mA

What this order code is

ADP7182AUJZ-R7 is the adjustable ADP7182 in the 5-lead TSOT body, on a 7 inch reel. It is a negative low dropout regulator that runs from minus 2.7 V to minus 28 V, sinks up to 200 mA, sets its output anywhere from minus 1.22 V to minus VIN plus the dropout with an external divider, publishes 18 uV RMS of noise, 66 dB of rejection at 10 kHz at a minus 3 V output, minus 185 mV of dropout at 200 mA, plus or minus 1 percent of initial accuracy, minus 650 uA of ground current at full load and minus 2 uA in shutdown.

The enable pin accepts either positive or negative logic, which is the detail that makes this part easy to hang off a positive rail's enable signal without an inverter. The fixed voltage siblings of this code carry a trimmed divider inside; this one brings the feedback node out, so the output is whatever the two resistors say it is, and so is the accuracy.

Parameters as published

ItemValue
Configurationadjustable, minus 1.22 V reference
Output rangeminus 1.22 V to minus VIN plus dropout
Output currentminus 200 mA
Input voltage rangeminus 2.7 V to minus 28 V
Dropout at minus 200 mAminus 185 mV
Output noise18 uV RMS
PSRR66 dB at 10 kHz at minus 3 V out
Initial accuracyplus or minus 1 percent
Accuracy over temperatureplus 2 to minus 3 percent
Ground current at full loadminus 650 uA
Shutdown currentminus 2 uA
Enable logicpositive or negative
Body5-lead TSOT

Numbers that decide the application

Minus 185 mV at minus 200 mA is 0.925 ohm, so a minus 5 V output needs at least minus 5.185 V at the input. The interesting figure is the heat, and it is set by the difference between the rails rather than by the current rating. From minus 12 V to minus 5 V at the full 200 mA the part dissipates 1.4 W, which in a 5-lead TSOT at around 250 C per watt is a rise of 350 C and impossible. From a minus 5.9 V rail the same current dissipates 0.18 W and rises about 46 C. In practice a minus 12 V input at 20 mA is 0.14 W and 35 C, at 50 mA it is 0.35 W and 88 C, so the useful working point on a wide negative rail is tens of milliamps.

The adjustable divider is the second decision. The reference is minus 1.22 V, so the output is set by the ratio of two resistors and their tolerance is added to the 1 percent initial accuracy and to the plus 2 minus 3 percent over temperature. A pair of one percent resistors adds about 1.4 percent, which on a minus 5 V rail is 70 mV, and the divider current is drawn from the rail and appears in the ground current budget. A 100 kohm divider at minus 5 V draws 50 uA against the 650 uA the part itself takes at full load, which is acceptable, and a 10 kohm divider draws 500 uA, which doubles the budget and defeats a low current part.

18 uV RMS is 0.24 LSB of a 16 bit converter on a 5 V span, 0.94 LSB at 18 bits and about 4 LSB at 20 bits, so the regulator is quiet enough for a 16 bit bipolar front end and becomes the limiting term beyond that. Rejection of 66 dB at 10 kHz passes 0.5 mV of a 1 V ripple, and the curve falls with frequency, so a negative rail derived from a switching converter needs filtering at the switching frequency. The minus 650 uA of ground current is 5.7 Ah over a year, and the minus 2 uA shutdown is 17.5 mAh, which is why the enable pin is worth using on a battery instrument.

Where it fits and where it does not

It fits a bipolar analog front end that needs a quiet negative rail for op amps, a converter or a sensor bias, and it fits a rail that has to be adjustable at test or trimmed per unit. It does not fit a minus 12 V to minus 5 V drop at 200 mA, it does not fit a rail more negative than minus 28 V, and it does not fit a positive rail, because this part sinks current and cannot source it.

Supply and second source questions

Two fields get lost on this code. The first is adjustable against fixed: the fixed codes carry their own divider and the same body, so a substitute with a fixed minus 5 V output will regulate and will not be trimmable. The second is the enable polarity, which is a feature here and a fixed logic level on many alternatives. Negative regulators are also less interchangeable than positive ones in general, because the reference polarity and the ground current direction differ between families, and a substitute that looks right on a comparison table can put its quiescent current into the wrong node. The regulator families are listed on the power management cross reference page.

Sourcing notes and next step

We quote the code with the body and the packing, and we ask for the negative rail and its load current, because the heat decides whether this part or a switching inverter is the right answer. Send the line items, quantities and required date through the BOM shortage recovery page and we will answer with availability. The wider regulator list sits on the analog and mixed signal IC page.

Request Quote — In Stock, 100% New & Original, Full Warranty