Contact Us

ADP1613ARMZ-R7

Brand: Analog Devices
Analog Devices ADP1613ARMZ-R7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADP1613ARMZ-R7 — Analog & Mixed-Signal ICs | Superb Automation

ADP1613ARMZ-R7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADP1613ARMZ-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADP1613ARMZ-R7: a step up converter with a 2 A switch and a selectable 650 kHz or 1.3 MHz rate

What this order code is

ADP1613ARMZ-R7 is a current mode pulse width modulated step up converter with an integrated 2.0 A switch, an output voltage adjustable up to 20 V, and a switching frequency that the board selects as 650 kHz or 1.3 MHz with a pin. The minimum input voltage is 2.5 V, the efficiency is up to 94 percent, and the part includes adjustable soft start, undervoltage lockout, thermal shutdown and a logic controlled enable. The body is an 8-lead MSOP under 1.1 mm tall, which is why the family is used behind a display or in a thin portable product.

The two frequencies are the choice that matters most. At 650 kHz the switching losses are lower and the inductor can be a larger, cheaper part; at 1.3 MHz the inductor and the capacitors shrink but the switching losses rise. The current mode architecture with an external compensation node gives a predictable transient response and makes the loop stable across the load range, and the adjustable soft start keeps the inrush current away from the input source when the converter is enabled.

Parameters as published

ItemValue
Topologystep up, current mode PWM
Switch current limit2.0 A
Output voltageadjustable up to 20 V
Minimum input voltage2.5 V
Switching frequency650 kHz or 1.3 MHz, pin selectable
Efficiencyup to 94 percent
Soft startadjustable
Protectionundervoltage lockout, thermal shutdown
Enablelogic controlled
Body8-lead MSOP, under 1.1 mm tall

Numbers that decide the application

The 2.0 A figure is a switch current limit and not an output current. In a boost converter the input current is the switch current, so the output current a board can deliver falls as the step up ratio rises. Boosting 5 V to 12 V at 85 percent efficiency draws 12 V times the output current divided by 5 V and 0.85, which is 2.82 times the output current: at the 2 A limit that is about 700 mA of output current, and at a realistic 80 percent of the limit it is 570 mA. The same converter boosting 3.3 V to 12 V has a ratio of 4.2 and delivers about 340 mA at the limit. A requirement for 1 A at 12 V from a single cell is outside this part regardless of what the headline current suggests.

The duty cycle sets the on time and therefore the inductor. Boosting 5 V to 12 V runs about 58 percent duty, so at 650 kHz the switch is on for 900 nanoseconds and at 1.3 MHz for 450 nanoseconds. The inductor ripple is the input voltage times the on time divided by the inductance, so the same inductor gives half the ripple at the higher frequency, and the output capacitor sees the same reduction. That is the whole reason the pin selectable frequency exists: it lets one part serve a 3 mm tall product at 1.3 MHz and a cost sensitive product at 650 kHz.

The 2.5 V minimum input is the floor for startup and it is a hard floor for a two cell alkaline pack at end of life. The undervoltage lockout and the soft start together decide whether the converter starts into a load that is already drawing current, and the soft start capacitor is the component that sets the inrush, not the inductor.

Where it fits and where it does not

It fits thin film transistor liquid crystal display bias supplies, portable products that need a 12 V or 15 V rail from a battery, industrial and instrumentation equipment with a 5 V input, and any step up requirement below about 20 V at a few hundred milliamps. It does not fit an output current above about 700 mA at a 12 V output from 5 V, an input below 2.5 V, or an application that needs the converter to regulate down as well as up, since this is a boost only part.

Supply and second source questions

The questions we get are about the switch current against the output current, the frequency choice and the inductor, and about whether a pin compatible step up converter from another vendor has the same current limit. The limit and the frequency are the two numbers that decide whether a board works, and both are usually different between vendors even when the pinout matches. The boost converters we hold are listed on the power management cross reference page.

Sourcing notes and next step

We quote this code against the bill of materials and check the body and the packing, and we confirm the input rail and the output current on the line so the switch limit is checked against the real duty cycle rather than the headline. Where the exact code is short we will say so rather than offer a boost converter with a lower current limit. Send the line items, quantities and required date through the BOM shortage recovery page, and where the display bias rail is part of a panel assembly we also support, the component cost reduction page describes how the converter, inductor and capacitors are quoted together.

Request Quote — In Stock, 100% New & Original, Full Warranty