ADP125ACPZ-R7
Product Specifications
ADP125ACPZ-R7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADP125ACPZ-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADP125ACPZ-R7: an adjustable 500 mA low dropout regulator with 45 microamps of quiescent current
What this order code is
ADP125ACPZ-R7 is the adjustable member of a two part family, a CMOS low dropout regulator that delivers up to 500 mA from an input between 2.3 V and 5.5 V, in an 8-lead LFCSP with an exposed paddle. The fixed version, ADP124, offers 31 output voltages from 1.75 V to 3.3 V; this part sets its output between 0.8 V and 5.0 V with an external divider, which is the option a board uses when the rail is not one of the standard voltages.
Dropout is 130 mV at 500 mA, which is a 0.26 ohm pass element, and the quiescent current is 45 microamps with a shutdown current below 1 microamp. Initial accuracy is 1 percent, ripple rejection is 60 dB at 100 kHz, and the output is stable with 1 microfarad ceramic capacitors. Internal soft start gives a constant 350 microsecond start up, and short circuit and thermal overload protection are included. The exposed paddle package is specified with a lower thermal resistance than a standard MSOP, which is the reason it can hold 500 mA at all.
Parameters as published
| Item | Value |
|---|---|
| Output | adjustable, 0.8 V to 5.0 V by external divider |
| Maximum output current | 500 mA |
| Input voltage range | 2.3 V to 5.5 V |
| Dropout at 500 mA | 130 mV |
| Quiescent current | 45 microamps |
| Quiescent current at full load | 210 microamps |
| Shutdown current | below 1 microamp |
| Initial accuracy | 1 percent |
| Ripple rejection | 60 dB at 100 kHz |
| Start up | internal soft start, 350 microseconds |
| Stability | 1 microfarad ceramic input and output |
| Package | 8-lead LFCSP with exposed paddle |
Numbers that decide the application
One hundred and thirty millivolts at 500 mA is 0.26 ohms, so a 1.8 V output needs 1.93 V at the input at full load. From a 3.3 V rail that leaves 1.37 V of headroom, which is comfortable; from a 2.5 V rail it leaves 570 mV and the regulator is still inside its dropout, but from a 2.0 V rail the same 1.8 V output is outside the part. This is the calculation that decides whether a rail can be run from a 2.5 V intermediate supply.
Dissipation is the second calculation. From 5 V to 1.8 V at 500 mA the regulator drops 1.6 W, and from 3.3 V to 1.8 V it drops 0.75 W. In an 8-lead LFCSP with an exposed paddle the second number is manageable and the first is a thermal problem: the package can pass the heat to the board, but only if the board provides the copper. A 500 mA rating is therefore a thermal statement as much as an electrical one.
The adjustable version adds the divider to the error budget. Initial accuracy of 1 percent is 18 mV on 1.8 V before the divider, and a pair of one percent resistors adds another 1 percent, so the rail is a 2 percent rail at room temperature before drift. The 45 microamps of quiescent current is 394 mAh over a year, which is small for a line powered board and significant for a battery one; the 210 microamps at full load is the figure that matters at the top of the current range.
Ripple rejection of 60 dB at 100 kHz turns 10 mV of ripple into 10 microvolts, which is why this part is often used as a post regulator behind a switching converter. The rejection falls at higher frequencies, so the capacitor at the input does the work above 1 MHz.
Selection and cross reference notes
Fixed or adjustable is the first decision. The fixed version covers 31 voltages with a trimmed output and no divider; the adjustable version covers anything in its range and pays for it in accuracy and two resistors. A board qualified with a fixed code does not become an adjustable board by fitting this part in the same footprint, because the feedback pin is not the same net.
For a substitute, the dropout at the real load, the quiescent current and the package thermal path come before the current rating. Two regulators that both claim 500 mA can differ by a factor of three in dropout, and the dropout decides whether the rail works at the bottom of the input range.
Where it fits
Post regulation after a switching converter, point of load supplies for digital cores, portable and battery powered equipment, GPS and location units, medical instrumentation and automatic meter reading. The 60 dB rejection at 100 kHz and the 1 microfarad ceramic stability make it a straightforward second stage, and the exposed paddle package keeps the thermal path short. Buyers working on power rails can start at the power management cross reference hub, and medical builds usually reference the medical device components page.
Buying notes
ACPZ is the 8-lead LFCSP and R7 is the reel; the fixed version carries a different family number. Because both parts share a datasheet and a package outline, the family number is the field that decides whether the board needs a divider. The exposed paddle is a soldering requirement, not an option.
Sourcing notes and next step
For a regulator the questions are the real load, the input rail at its minimum and the thermal path. We quote the exact code and confirm the body before shipping. Send the codes and quantities through the BOM shortage recovery page and we will answer with availability and the dropout figure at your load.
Request Quote — In Stock, 100% New & Original, Full Warranty