ADM706RARZ-REEL7
Product Specifications
ADM706RARZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADM706RARZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADM706RARZ-REEL7: a 4.40 V supervisor with a 1.60 s watchdog and a power fail comparator
What this order code is
ADM706RARZ-REEL7 is the 4.40 V threshold member of a four part supervisory family, in an 8-lead SOIC on a reel. It watches a 5 V rail, holds a reset output low while the rail is out of range, and resets the processor if the watchdog input has not been toggled within 1.60 s. It also carries an independent 1.25 V threshold comparator that can warn of a power failure, detect a low battery or watch a second supply, and a debounced manual reset input. The reset output is guaranteed to stay valid with a supply as low as 1 V, which is the field that matters on a board whose rail collapses slowly.
The letter after the base number is the threshold and the function, not a grade. The ADM705 and ADM706 are identical apart from the threshold, at 4.65 V and 4.40 V respectively. The ADM707 and ADM708 drop the watchdog and add an active high reset output alongside the active low one, again at 4.65 V and 4.40 V. A board that needs both polarities or needs no watchdog is looking at the 707 and 708, and a board that swaps a 705 for a 706 moves its reset point by 250 mV without any other change.
Parameters as published
| Item | Value |
|---|---|
| Threshold on this code | 4.40 V |
| Sibling threshold | 4.65 V on the ADM705 |
| Reset output | active low |
| Reset pulse width | 200 ms |
| Reset valid down to | supply of 1 V |
| Watchdog timeout | 1.60 s |
| Watchdog | independent, fitted on this member |
| Second comparator threshold | 1.25 V |
| Manual reset input | debounced, TTL and CMOS |
| Quiescent current | 190 uA |
| Supply | 5 V rail |
| Body | 8-lead SOIC, PDIP also available |
| Cross reference | upgrade for the MAX705 to MAX708 group |
Numbers that decide the application
The 4.40 V threshold leaves 350 mV against a 5 V rail at minus 5 percent, which is 4.75 V, and 100 mV against a rail at minus 10 percent, which is 4.50 V. A board specified at plus or minus 5 percent has a comfortable margin and a board specified at minus 10 percent is nearly on the threshold, so the threshold option and the rail tolerance have to be chosen together. The 250 mV between the 705 and the 706 is larger than either of those margins, which is why the two are not interchangeable in a qualified product.
The 1.60 s watchdog is a long window by supervisory standards, and it is the reason this part survives a processor that spends time in a flash erase or a display refresh. At an instruction rate of 1 MHz that window is 1.6 million instruction periods, so a loop that forgets to strobe for a second and a half is the failure this part catches, not a loop that hangs for ten milliseconds. The 200 ms reset pulse is separate and is the time the processor is held after the rail returns.
The second comparator is the most under used feature. Its threshold is 1.25 V and it is a plain comparator with an external divider, so a 5 V rail that should warn at 4.75 V needs a divider whose ratio is 1.25 divided by 4.75, which is 0.263. A 280 k upper resistor and a 100 k lower resistor give 4.75 V, and a 300 k with a 100 k gives 5.00 V, so the warning point is set by two resistors and their tolerance rather than by the part. The quiescent current of 190 uA is 1.66 Ah over a year, which is a line powered figure and rules the part out of a coin cell product.
Where it fits and where it does not
It fits 5 V microprocessor systems, controllers, instruments, industrial boards and any product that needs a reset, a watchdog and a supply warning from one 8-lead body. It does not fit a 3.3 V rail, where the 4.40 V threshold would never be crossed, and it does not fit a battery product because of the 190 uA. It is also not the part for a board that needs an active high reset as well, which is the ADM707 or ADM708, and the watchdog cannot be disabled on this code, so a processor that sleeps for longer than 1.60 s needs a different arrangement.
Supply and second source questions
The questions we get on this code are about the threshold, the reset polarity and the MAX705 cross reference. The vendor describes this family as an upgrade for the MAX705 to MAX708 group, which is a functional statement and not a promise that every timing figure matches. A cross reference that matches the pinout can still differ in watchdog period and threshold tolerance, and those two decide whether a qualified product keeps behaving the same way. The parts that share the function and the ones that only look similar are listed on the ADI part second source page.
Sourcing notes and next step
We quote this code against the bill of materials and check the threshold, the reset polarity, the watchdog and the body, because a four letter family name does not identify which of those is on the reel. Where the exact code is short we will say so rather than substitute the 4.65 V member and move the reset point. Send the line items, quantities and required date through the BOM shortage recovery page and we will answer with availability. The broader part list sits on the analog and mixed signal IC page.
Request Quote — In Stock, 100% New & Original, Full Warranty