ADM6713RAKSZ-REEL7
Product Specifications
ADM6713RAKSZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADM6713RAKSZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADM6713RAKSZ-REEL7: an open drain reset generator in a four lead package
What this order code is
ADM6713RAKSZ-REEL7 is a reset generator for microprocessor systems, in the open drain version of the ADM6711 and ADM6713 pair. It asserts reset at power up, at power down and whenever the supply falls below a preset threshold, and it adds a debounced manual reset input so a switch or a logic signal can force a reset as well. Current consumption is 12 microamps, the reset timeout is at least 140 milliseconds, and the package is a 4-lead SC70.
The threshold family has six options between 2.32 V and 4.63 V, which covers 2.5 V, 3 V, 3.3 V and 5 V supplies. The R in this order string is the 3 V rail member: the data sheet specifies the R models with a 3 V nominal supply, and the ordering guide in the same document lists the T option at 3.08 V, so the suffix letter is the field that selects the trip point and it is worth confirming against that table on any quotation.
Parameters as published
| Item | Value |
|---|---|
| Output type | open drain, requires an external pull-up |
| Supply current | 12 microamps |
| Reset timeout | 140 milliseconds minimum, 240 milliseconds nominal |
| Threshold options | six, from 2.32 V to 4.63 V |
| Nominal supply, R models | 3 V |
| Manual reset input | debounced, with an internal pull-up |
| Reset validity | asserted down to 1 V supply |
| Glitch immunity | specified against fast negative transients |
| Pull-up resistance on the manual reset pin | 10 to 20 kilohms |
| Package | 4-lead SC70 |
| Temperature range | specified over temperature |
Numbers that decide the application
The two timeout numbers in the document are worth reading together. The feature list guarantees a reset timeout of at least 140 milliseconds, and the functional block diagram annotates the reset generator as 240 milliseconds. The gap between them is the tolerance of an on chip timer, and a processor that needs a specific minimum reset width should be sized against the 140 millisecond floor rather than the typical figure.
Twelve microamps is 105.12 mAh across a year, which is small enough that the supervisor can stay powered from the same rail it watches, and it is the reason a four lead part can replace a larger supervisor plus a delay capacitor. The manual reset input has a 10 to 20 kilohm internal pull-up, so at 3.3 V it sources 165 to 330 microamps while it is held low, which is a board level detail rather than a part problem but it does mean a switch to ground is the intended arrangement.
The open drain output is the difference between this part and the ADM6711. A push-pull output needs no external parts and cannot be wired to a second source; an open drain output needs a pull-up and can be tied to another reset line or pulled to a rail above the supply. On a board with several supervisors, the open drain version is the one that can be combined, and the four lead package is the smallest way to get a 140 millisecond reset into a board.
Selection and cross reference notes
The threshold is the first field and it has to be read from the ordering guide, because the letter in the middle of the string is the only thing that distinguishes a 3.08 V part from a 2.93 V part and both are the same silicon in the same package. A threshold that is too high trips on a legal rail and a threshold that is too low never trips at all, and both failures are silent until the board is in the field.
The output type is the second field: push-pull or open drain, decided by whether the reset line has to be shared. The third is the manual reset input, which is present on both members of this pair but absent from some single function supervisors, and a board that relies on a front panel reset button needs it. The reset valid down to 1 V supply is what keeps the processor held while the rail collapses, and a part without that behaviour releases reset early and lets the processor run on a dying rail.
Where it fits
Microprocessor systems, computers, controllers, intelligent instruments and automotive systems are the applications named on the product page. The 4-lead SC70 is what makes the part attractive in a module where the supervisor is an afterthought and the board area was allocated before anyone remembered it was needed. Buyers who need the family view can start at the analog and mixed signal category page, and teams working through a power up problem usually go via the MCU and interface cross reference page.
Buying notes
RAKSZ is the 4-lead SC70 body and the R is the threshold option; the other five thresholds, the push-pull version and the reel sizes all carry different strings. Because the threshold letter is a single character in the middle of the order code, it is the field most likely to be dropped in an abbreviated quotation, and the resulting part will work on the bench and fail at temperature.
Sourcing notes and next step
The questions that come back are the rail being monitored, the reset width the processor needs and whether the reset line is shared. We quote the ADM6713 codes against a bill of materials and confirm the threshold letter and body against the line. Send the codes, quantities and required date through the BOM shortage recovery page and we will answer with availability and the alternative where the exact threshold is short.
Request Quote — In Stock, 100% New & Original, Full Warranty