ADM485JRZ-REEL
Product Specifications
ADM485JRZ-REEL
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADM485JRZ-REEL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADM485JRZ-REEL: a 5 V RS-485 transceiver rated to 5 Mbps
What this order code is
ADM485JRZ-REEL is a differential line transceiver for multipoint bus transmission that meets the EIA RS-485 and RS-422 standards. It runs from a single 5 V supply, transmits at up to 5 Mbps, and accepts a bus common mode range of minus 7 V to plus 12 V, which is what allows two nodes with a ground potential difference between them to talk to each other. The driver and the receiver can be enabled independently and both go to a high impedance state when disabled.
The part includes thermal shutdown and short circuit protection, so a bus contention or an output short does not destroy the driver, and the outputs stay high impedance when the supply is off, which matters on a bus where one node is powered down and the others are still running. Up to 32 transceivers can sit on one bus with only one driver enabled at a time. The J grade in this code is the commercial temperature grade and the part is a functional upgrade for the LTC485 socket.
Parameters as published
| Item | Value |
|---|---|
| Standard | EIA RS-485 and RS-422 |
| Data rate | 5 Mbps |
| Supply | single 5 V |
| Bus common mode range | minus 7 V to plus 12 V |
| Driver propagation delay | 10 ns |
| Receiver propagation delay | 15 ns |
| Nodes per bus | 32 |
| Protection | thermal shutdown, short circuit |
| Powered down outputs | high impedance |
| Technology | BiCMOS |
| Socket upgrade | LTC485 |
| Body | 8-lead SOIC |
Numbers that decide the application
Five megabits per second is a 200 nanosecond bit, and the driver propagation delay is 10 nanoseconds, which is 5 percent of a bit. The receiver delay is 15 nanoseconds, 7.5 percent of a bit, and the two together are 12.5 percent of the bit period before the cable is considered. That is why a 5 Mbps link is specified with a short bus and a matched pair: at 200 nanoseconds per bit a 100 metre cable with 5 nanoseconds per metre of delay is 500 nanoseconds of one way delay, more than two bits, so the length and the termination are part of the specification and not an afterthought.
The minus 7 V to plus 12 V common mode range is the number that separates an RS-485 part from an RS-422 part in practice, because it is the range over which the receiver still produces a valid output when the two ends of the bus sit at different ground potentials. A factory floor with drives and contactors can shift a ground by several volts, and a transceiver with a narrower range reads that shift as data. The 32 node limit is the standard load, and each node presents a fraction of a unit load, so a bus with more than 32 nodes needs a part with a lower unit load.
The thermal shutdown and the short circuit protection are not marketing features on this part, they are what makes a bus survive a miswire. A driver that is enabled while another node drives the same pair dissipates the bus current in its output stage, and the thermal shutdown forces the output to high impedance before the junction reaches a destructive temperature. The high impedance state when the supply is off keeps a powered down node from loading the bus.
Where it fits and where it does not
It fits industrial networks, building automation, motor drive control buses, point of sale networks and any multidrop link that needs a 5 V transceiver at up to 5 Mbps. It does not fit a 3.3 V only system, a link that needs isolation inside the transceiver, or a bus with more than 32 unit loads. The commercial grade in this code is also a limitation for an outdoor or unheated cabinet.
Supply and second source questions
The questions we get are about the grade, the common mode range and the failsafe behaviour on an idle bus, since a receiver with no failsafe output can chatter when every driver is disabled. The LTC485 pinout is common across several vendors, so a cross reference has to match the data rate, the common mode range and the temperature grade as well as the pins. The interface parts we hold are listed on the second source page.
Sourcing notes and next step
We quote this code against the bill of materials and check the grade, the body and the packing, because the J grade is a commercial part and the industrial and automotive grades in the same family are separate order codes with a different price. Send the line items, quantities and required date through the BOM shortage recovery page, and for drives and factory automation platforms that need the transceiver plus its isolation and protection, the power management cross reference page lists the companion parts.
Request Quote — In Stock, 100% New & Original, Full Warranty