ADM2486BRWZ
Product Specifications
ADM2486BRWZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADM2486BRWZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ADM2486BRWZ: twenty megabit isolated RS-485
The ADM2486BRWZ is the fast member of the 16-lead isolated RS-485 family, at 20 Mbps with a 2500 V rms isolation rating, current limiting, thermal shutdown and an active high receiver disable. It is the order code for an isolated link that carries a real data stream rather than a field bus polling cycle.
Published values
| Parameter | Value |
|---|---|
| Function | isolated half duplex RS-485 transceiver |
| Data rate | 20 Mbps |
| Isolation test voltage | 2500 V rms for one minute |
| Working voltage | 560 V peak |
| Common mode transient immunity | above 25 kV per microsecond |
| Protection | current limiting and thermal shutdown |
| Receiver control | active high disable pin |
| Logic side supply | 5 V or 3 V |
| Bus side supply | isolated 5 V |
| Package and range | 16-lead wide body SOIC, -40 C to +85 C |
Twenty megabits through a barrier
At 20 Mbps a bit is 50 ns. The isolation barrier adds propagation delay that a non isolated transceiver does not have, and at 50 ns per bit that delay is a significant part of the budget. The part is specified for the rate, so the number to check on a candidate is not the transceiver delay alone but the delay of the complete isolated path.
The parallel with the non isolated family is direct: the ADM1485 runs 30 Mbps over copper and the ADM2486 runs 20 Mbps through a barrier in the same package size. A link that has to be isolated and fast pays for the barrier in data rate, and the planning has to start from that.
Receiver disable and bus sharing
The active high receiver disable puts the receiver output in a high impedance state, which lets several devices share one processor input or one bus without a buffer. It is a convenience that matters in a multi drop backplane where the receiver of an inactive node should not drive the local line.
The driver has current limiting and thermal shutdown, so a contention fault or a shorted pair results in a protected driver rather than a damaged package. The fault still has to be located, but the transceiver survives long enough to be located.
Isolated 5 V on the bus side
This part wants an isolated 5 V rail on the bus side, which is the conventional arrangement in industrial equipment and the reason it is the default choice when the isolated domain already carries 5 V logic. The 3.3 V bus side variant is a different order code in the same package.
The barrier itself is rated for 560 V peak of working voltage, which is 396 V rms. That covers a 400 V drive with a small margin and it does not cover a 690 V one, where the part with the reinforced rating is the correct choice.
Replacement checks
The package is shared across four order codes that differ in data rate, working voltage and bus side supply, so a substitution by footprint is easy to make and easy to get wrong. The order of checks is working voltage, data rate, bus side supply, then the receiver control polarity.
The pages below hold the cross reference, the obsolescence route and the acceptance sequence.
For a board that has to keep running while a reel runs out, the pin to pin cross reference is where the family alternatives sit, the ADI second source page is the check list before a substitute goes in, and the obsolete part cross reference hub is how a gap is covered without a new line item.
Two questions buyers ask
Is the ADM2486BRWZ interchangeable with the ADM2491EBRWZ? Not directly. Both are isolated 16-lead parts, but the working voltage, the data rate and the bus side supply differ. The ADM2491E carries a reinforced rating and needs an isolated 5 V bus side as well.
What happens if the bus is shorted while the driver is enabled? The driver limits its output current and shuts down thermally, then restarts when the junction cools. The transceiver protects itself, and the fault has to be cleared at the system level.