ADM2484EBRWZ
Product Specifications
ADM2484EBRWZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADM2484EBRWZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ADM2484EBRWZ: five kilovolt isolated RS-485 with a 3.3 V bus side
The ADM2484EBRWZ is an isolated RS-485 transceiver in a 16-lead wide body SOIC with a 5000 V rms isolation rating and 15 kV human body model protection on the bus pins. It is the member of the family whose isolated bus side runs at 3.3 V rather than 5 V, which is what makes it the part for a modern low voltage node behind a barrier.
Published values
| Parameter | Value |
|---|---|
| Function | isolated half or full duplex RS-485 transceiver |
| Data rate | 500 kbps |
| Isolation test voltage | 5000 V rms for one minute |
| Working voltage | 645 V peak |
| ESD on bus pins | 15 kV human body model |
| Common mode transient immunity | above 25 kV per microsecond |
| Supply current, logic side | 2.0 mA unloaded |
| Supply current, bus side | 3.0 mA unloaded |
| Bus side supply | isolated 3.3 V |
| Package and range | 16-lead wide body SOIC, -40 C to +85 C |
The bus side supply is the ordering decision
Most isolated RS-485 parts in this family want an isolated 5 V rail on the bus side. This one wants 3.3 V. On a board where the isolated domain is already 3.3 V, that difference removes a regulator and its quiescent load; on a board where the isolated domain is 5 V, it adds one.
The two currents quoted, 2.0 mA on the logic side and 3.0 mA on the bus side, are unloaded figures for the half duplex configuration. The driver current into a terminated bus is a separate and much larger number, so the isolated supply has to be sized on the loaded case, not on these two.
Five kilovolts against 645 V of working voltage
The 5000 V rms rating is a one minute test and it is twice the rating of the 16-lead parts that sit at 2500 V rms. The continuous working voltage is 645 V peak, which is 456 V rms, so the barrier is suitable for a 400 V system and not for a 690 V one.
The gap between the two numbers is normal and it is where most specification comparisons go wrong. A part with a higher test voltage and a lower working voltage is not the more isolated part for a continuous high voltage node. The working voltage is the number the insulation coordination calculation uses.
15 kV on the bus pins
The bus pins are the ones that reach a connector, so they carry the human body model rating at 15 kV. Inside a cabinet that rating is rarely tested; on a field bus that is wired by hand it is the difference between a damaged transceiver and a recovered frame.
The protection is on the RS-485 side only. The logic side has ordinary logic thresholds, and a fault there is a board level problem rather than something the transceiver absorbs.
Replacement checks
Within this package the family differs in data rate, working voltage and bus side supply, and the order codes differ by one letter. A substitute has to match the working voltage for the safety case, the bus side supply for the isolated domain, and the data rate for the protocol.
The pages below hold the family alternatives, the verification sequence for a substitute and the shortage route.
When an order code in this family cannot be found, the ADI second source page lists what else does the same job, how to verify a drop in replacement covers what to check before a part is dropped into an existing board, and BOM shortage recovery is the route we take on a live shortage.
Two questions buyers ask
Can the ADM2484EBRWZ run full duplex? Yes. The part is configurable as half or full duplex, and the unloaded supply currents quoted in the table are for the half duplex configuration.
Does it need an external isolated DC-DC converter? Yes. The barrier isolates data only. The ADM2587E is the member that also transfers power across the barrier.