ADL5536ARKZ
Product Specifications
ADL5536ARKZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADL5536ARKZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ADL5536ARKZ: 20 dB gain block for a 20 MHz to 1 GHz receive path
The ADL5536ARKZ is a fixed 20 dB gain block in a 3-lead SOT-89 with an exposed paddle, internally matched to 50 ohm at both ports from 20 MHz to 1.0 GHz. It is the order code quoted when a receiver chain needs one more stage of gain without a matching network, and when the noise figure and the third order intercept have to hold at the same time across the whole band.
Published values
| Parameter | Value |
|---|---|
| Gain | 20 dB fixed |
| Frequency range | 20 MHz to 1.0 GHz |
| Output third order intercept | 45.0 dBm at 190 MHz, 49.0 dBm at 380 MHz |
| Noise figure | 2.6 dB at 190 MHz, 2.7 dB at 380 MHz |
| Output 1 dB compression | 19.6 dBm at 190 MHz |
| Supply | single 5 V |
| Supply current | 105 mA typ, 122 mA max |
| Input and output match | 50 ohm internal, ac coupled externally |
| ESD | 2 kV human body model, class 2 |
| Package and range | 3-lead SOT-89, -40 C to +85 C |
Reading the intercept against the compression point
45 dBm of output intercept against 19.6 dBm of output compression is 25.4 dB of headroom, which is why this part holds its linearity in a multicarrier chain rather than only on a single tone. The figure that matters for a receiver is the noise figure, and 2.6 dB at 190 MHz is what lets the block sit early in the chain without spending the noise budget.
The two numbers are measured at different frequencies in the data sheet, 190 MHz and 380 MHz, and both are quoted rather than smoothed into one. A board that operates at 900 MHz has to read the curves, because neither the intercept nor the noise figure is flat to the top of the band.
What 20 dB of gain costs in input headroom
With 20 dB of gain and 19.6 dBm of output compression, the input compression point is about -0.4 dBm, which is 0.9 mW into 50 ohm, or roughly 0.3 V peak to peak. Any signal larger than that drives the output stage into compression, and the stage after it sees the distortion.
In a receive path that is the correct order of things: the block is placed after the filter and before the mixer, where the largest signal is bounded by the front end selectivity. In a test instrument front end, where the input can be a full scale tone, the same block needs a step attenuator ahead of it.
Supply current and the paddle
105 mA at 5 V is 525 mW, and the maximum of 122 mA is 610 mW, which in a 3-lead plastic body is carried almost entirely by the exposed paddle into the board copper. The paddle is not optional and a footprint that treats it as a mechanical feature will run the junction far above the calculated value.
The quiescent current also sets the thermal noise floor of the board: 105 mA through a supply trace of 20 milliohm is 2.1 mV of supply ripple, which has to be decoupled close to the device. The data sheet asks for input and output ac coupling capacitors, supply decoupling and one external inductor, and those four components are the whole external circuit.
Second source and family position
The ADL5535 is pin compatible with this part and delivers 16 dB of gain instead of 20 dB, so a board that is 4 dB short of gain can be reworked with the sibling without touching the footprint. That is the reverse of the usual substitution: here the pin compatible part is the lower gain one, and moving to it costs 4 dB of sensitivity.
For a chain that needs more than 20 dB, two stages are cheaper than a higher gain block, but the second stage then contributes less to the noise figure and more to the intercept. The pages below cover the family alternatives and the verification sequence for a replacement.
When an order code in this family cannot be found, the amplifier cross reference lists what else does the same job, the ADI second source page covers what to check before a part is dropped into an existing board, and how to verify a drop in replacement is the route we take on a live shortage.
Two questions buyers ask
Does the ADL5536 need an external matching network? No. Both ports are internally matched to 50 ohm, so the external parts are ac coupling capacitors, supply decoupling and one inductor for the bias feed.
Can it run from 3.3 V? The data sheet specifies a single 5 V supply, and the compression point and intercept are quoted at that voltage. A 3.3 V rail is outside the published operating point.