ADG736BRMZ-REEL
Product Specifications
ADG736BRMZ-REEL
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADG736BRMZ-REEL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADG736BRMZ-REEL: two independent SPDT switches with 16 nanosecond turn on
What this order code is
ADG736BRMZ-REEL is a monolithic CMOS device containing two independently selectable single pole double throw switches, in a 10-lead MSOP. Each switch conducts equally well in both directions when on, the signal range extends to the supplies, and the switching action is break before make. The supply is single ended from 1.8 V to 5.5 V, the on resistance is 2.5 ohms typical, and the minus 3 dB bandwidth is above 200 MHz. BRMZ is the MSOP body and REEL is the reel.
The on resistance is specified at three rails and the numbers are not close to each other: 4.5 ohms maximum at 5 V, 8 ohms maximum at 3 V, and about 35 ohms typical at 1.8 V. Turn on is 16 nanoseconds and turn off is 8 nanoseconds, quiescent power is under 0.01 microwatt, and the control inputs are TTL and CMOS compatible. The part is qualified for automotive applications and specified from minus 40 to plus 125 degrees C.
Parameters as published
| Item | Value |
|---|---|
| Configuration | two independent single pole double throw switches |
| Supply | 1.8 V to 5.5 V single supply |
| On resistance, typical | 2.5 ohm |
| On resistance, maximum at 5 V | 4.5 ohm |
| On resistance, maximum at 3 V | 8 ohm |
| On resistance at 1.8 V | about 35 ohm typical |
| Turn on time | 16 ns |
| Turn off time | 8 ns |
| Bandwidth | above 200 MHz at minus 3 dB |
| Switching action | break before make |
| Quiescent power | under 0.01 microwatt typical |
| Temperature range | minus 40 C to plus 125 C, automotive qualified |
Numbers that decide the application
The three resistance figures are the whole application story. Into a 1 kilohm load, 4.5 ohms at 5 V is 0.448 percent and 8 ohms at 3 V is 0.794 percent, both acceptable in a signal path. At 1.8 V the typical 35 ohms is 3.38 percent, seven times the 5 V figure, so a board that runs the switch from the lowest rail pays for it in gain error. The ratio of the maximum to the typical at 5 V is 1.8, which is a normal spread for this process and means the typical number in a comparison table is optimistic by most of a factor of two.
The switching times are fast enough that the part is not the limit in most paths: 16 nanoseconds on and 8 nanoseconds off, against a 5 nanosecond period at 200 MHz, means the switch settles within a few cycles of the bandwidth it claims. In a sample and hold circuit the charge injected at the switching instant is what matters rather than the time, and that figure comes from the data sheet rather than from the headline speeds.
Two independent switches in one 10-lead body is what makes the part useful for a differential or a stereo path, where two changeovers have to happen at the same instant. The break before make action means the two throws are never connected, which is what a relay replacement needs; a make before break part would short the two sources for the duration of the overlap.
Selection and cross reference notes
The configuration is the first field: two single pole double throw switches are not the same function as a four to one multiplexer or a dual single pole single throw, and the pin counts differ even when the packages match. The supply rail is the second, because the resistance at 1.8 V is seven times the resistance at 5 V and a part compared at the wrong rail is not a comparison at all.
The automotive qualification is the third field. The vendor states the qualification for the family but the qualified codes are separate order strings, so a substitution has to be checked against the qualification list rather than against the family name. Bandwidth above 200 MHz is a small signal figure and says nothing about the distortion at a given level, which is the number that matters in an audio path.
Where it fits
USB 1.1 signal switching, cell phones, personal digital assistants, battery powered systems, communication systems, sample and hold circuits, audio signal routing, audio and video switching and mechanical reed relay replacement are the applications named on the product page. The relay replacement case is the one that uses both switches: a reed relay pair that wears out and takes milliseconds is replaced by a part that switches in nanoseconds and draws nothing. Buyers who need the family view can start at the analog and mixed signal category page, and teams replacing an electromechanical part usually work from the drop in replacement verification page.
Buying notes
BRMZ is the 10-lead MSOP body and REEL is the reel; the same family is offered in other bodies and a single switch member exists under a different code. There is no grade letter for resistance, so the body, the packing and the automotive qualification are the fields that vary between sellers.
Sourcing notes and next step
The questions that come back are the supply rail, the load impedance and whether both switches have to change at the same instant. We quote the ADG736 codes against a bill of materials and confirm the body and qualification against the line. Send the codes, quantities and required date through the BOM shortage recovery page and we will answer with availability and the cross reference where the exact code is not on the shelf.
Request Quote — In Stock, 100% New & Original, Full Warranty