Contact Us

ADG1419BRMZ-REEL7

Brand: Analog Devices
Analog Devices ADG1419BRMZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADG1419BRMZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

ADG1419BRMZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADG1419BRMZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADG1419BRMZ-REEL7: One SPDT Switch at 2.1 Ohm, 390 mA and Break Before Make

The ADG1419BRMZ-REEL7 is a single pole double throw switch on an iCMOS process in an 8-lead MSOP, with 2.1 ohm typical on resistance, 2.4 ohm maximum at 25 C, 0.5 ohm maximum flatness, up to 390 mA of continuous current, full specification at plus or minus 15 V, plus 12 V and plus or minus 5 V, no separate logic supply, 3 V logic compatible inputs with a 2.0 V high threshold and a 0.8 V low threshold, rail to rail operation, and break before make action that makes it usable as a changeover element in a multiplexed path. The LFCSP version carries an enable input that turns all channels off; the MSOP version of this order code does not have that pin.

Two throws, one control line and a resistance low enough to sit in a signal path: that is the whole function. It is bought where a relay is too slow or too large and where the signal has to move between two sources or two loads without both being connected at once.

Three hundred and ninety milliamps through 2.4 ohm is 936 mV and 365 mW

At the rated continuous current the switch drops 936 mV and dissipates 365 mW, which is a power component in an 8-lead MSOP and not a signal switch. The 390 mA rating is therefore a current carrying rating with a thermal consequence, and a board that uses it to switch a load has to treat the package as a dissipating element with its own thermal resistance to ambient. At a quarter of that current the drop is 234 mV and the dissipation 91 mW, which the package handles without a copper plane.

The 2.1 ohm typical and 2.4 ohm maximum at 25 C are much closer together than the temperature wide figures in the quad families, and that is because this number is specified at 25 C: over the full range the resistance rises, and a board that has to work at 85 C should take the temperature coefficient from the data sheet curve rather than extrapolate the room temperature maximum. Into a 1 kOhm load the room temperature maximum of 2.4 ohm is 0.24 percent of gain error, and the 0.5 ohm flatness is 24 percent of the typical resistance, which sets the distortion of a signal passing through it.

ConfigurationSingle pole double throw, break before make
On resistance2.1 ohm typical, 2.4 ohm maximum at 25 C
Flatness0.5 ohm maximum, 24 percent of the typical resistance
CurrentUp to 390 mA continuous
Drop at rated current936 mV and 365 mW through 2.4 ohm
Gain error0.24 percent into 1 kOhm at the room temperature maximum
SuppliesPlus or minus 15 V, plus 12 V, plus or minus 5 V, all fully specified
Logic3 V compatible, 2.0 V high and 0.8 V low, no logic supply pin
Enable pinPresent on the LFCSP, absent on this MSOP order code
Package8-lead MSOP as BRMZ, 8-lead 3 mm by 2 mm LFCSP as BCPZ

Break before make is what keeps a changeover from shorting two sources

A changeover switch with make before break connects the common pin to both throws for the duration of the transition. In a signal path that means two sources are paralleled, and in a measurement path it means two channels are shorted together for a few nanoseconds at every switch. Break before make opens the first contact before closing the second, and the dead time is short enough for audio and for instrumentation and long enough that the two never overlap. Where the load cannot tolerate the brief open circuit, the answer is a capacitor on the common node or a different topology, not a switch without break before make.

The enable pin is the difference between the two packages and it catches people out at purchase order level. The LFCSP has it, the MSOP does not, so a board that was built around the enable function and then re-sourced to the MSOP loses the ability to turn the whole switch off. The two packages are otherwise the same switch and the same die, and the pin count is the same, which is why the substitution looks safe on a footprint drawing.

Two questions buyers ask

Can it be used as a two to one multiplexer?
Yes, that is what a single pole double throw is: two inputs and one common output, with one control line. The limitation is that the off channel blocks to the supplies but still presents capacitance, so at high frequency the isolation falls as the frequency rises and the two sources interact through that capacitance.

Is the 390 mA rating continuous in both directions?
Yes, the switch conducts equally in both directions and the current rating applies to the channel rather than to a direction. What changes with direction is the sign of the drop, which matters when the switch sits between a supply and a load and the load can push current back during a fault.

Ordering and supply

The BRMZ suffix is the 8-lead MSOP, lead free, in tape and reel; the BCPZ suffix is the LFCSP with the enable pin. Traps are the enable pin, the current rating against the package, and the supply ceiling of plus or minus 15 V. A plus or minus 10 V signal path sits on the limit at the plus or minus 12 V mode, so a 10 percent rail tolerance has to be counted before the supply is fixed.

We hold and source this family for production and for repair lots. Start at the analog mixed signal ICs family page, compare a candidate against the pin to pin cross reference, and where a switch has to be changed on a board that is already built, the order in how to verify a drop in replacement puts the enable pin and the current rating ahead of the socket check.

Request Quote — In Stock, 100% New & Original, Full Warranty