Contact Us

ADAU1701JSTZ-RL

Brand: Analog Devices
Analog Devices ADAU1701JSTZ-RL is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADAU1701JSTZ-RL — Analog & Mixed-Signal ICs | Superb Automation

ADAU1701JSTZ-RL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADAU1701JSTZ-RL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADAU1701 audio processor: 50 MIPS of 56-bit DSP with converters on the same die

The ADAU1701 is a single chip audio system: a 28-bit by 56-bit digital signal processor running at 50 MIPS, two analog to digital converters with 100 dB of signal to noise ratio, four digital to analog converters with 104 dB, an auxiliary four input converter for analog controls, and a serial port that supports I2S, left justified, right justified and TDM. It boots from a serial EEPROM on its own, so a product can ship without a host processor.

Published values

ParameterValue
Processing28-bit data with 56-bit double precision, 50 MIPS
Converters2 analog to digital with 100 dB signal to noise, 4 digital to analog with 104 dB
Analog in to analog out98.5 dB dynamic range
Distortionminus 83 dB total harmonic distortion plus noise on the converters, minus 90 dB on the outputs
Sample rateup to 192 kHz
Bootself boot from a serial EEPROM, or loaded by an external microcontroller
Auxiliary converter4 input multiplexer for analog controls
Serial portsI2S, left justified, right justified and TDM
Regulatoron chip 3.3 V regulator for 5 V systems
Package48-lead LQFP

What 50 MIPS means per sample

At 48 kHz, 50 million instructions per second is about 1,040 instructions for every sample. A biquadratic filter section costs roughly five instructions per sample, so the budget is on the order of 200 filter sections across all channels, and that is before delays, dynamics and mixing. At 192 kHz the same processor has about 260 instructions per sample, so the filter count falls by a factor of four.

That arithmetic is the whole reason to check a proposed signal chain against the sample rate before the firmware is written. A loudspeaker correction with thirty sections per channel is comfortable at 48 kHz and tight at 192 kHz, and a product that moves from one to the other without rechecking can run out of instructions in the middle of a product's life.

Self boot and the product that has no processor

The self boot mechanism reads a program and a parameter set from a serial EEPROM at power up, which means a powered speaker or an instrument amplifier can have full digital processing without a microcontroller on the board. The current parameter state can be written back to the same EEPROM at power down, so a user volume setting survives a power cycle.

A product that does have a host processor can load the program over the same interface instead, which allows firmware updates and different processing for different models. Both routes use the same part, so the same hardware can serve a fixed product and a configurable one.

Four converters and an auxiliary input

Two inputs and four outputs mean a stereo input can drive a two way speaker pair with the crossover inside the processor, using one output per driver. The auxiliary converter with its four input multiplexer is for analog controls, so a product can read a potentiometer or a switch ladder without an extra part and without the host processor.

The converters are on the same die as the processor, which removes the serial link between them and the clocking problem that comes with it. The cost is that the analog performance is fixed at the data sheet figure and cannot be improved by choosing a better converter, so a product that needs more than 100 dB of signal to noise has to put the converters outside.

Sourcing notes for this family: the ADI second source page holds the cross references, vendor consolidation is the pre substitution check, and the obsolete part cross reference hub is what we use when the part on the drawing is not on the shelf.

Two questions buyers ask

Can the ADAU1701 run without an EEPROM? Yes, if a host processor loads the program over the control port after power up. The self boot path needs the EEPROM; the host loaded path does not.

Is 50 MIPS enough for a three way crossover? At 48 kHz it is usually enough for a three way crossover with equalisation, because each section is a few instructions. The count has to include the delays and the limiters, and it has to be checked at the sample rate the product will actually run.