AD9910BSVZ
Product Specifications
AD9910BSVZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD9910BSVZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD9910: 1 GSPS and 0.23 Hz Resolution, Both Coming From the Same Clock
The AD9910 is a direct digital synthesizer with a 14 bit digital to analogue converter running at an internal clock of 1 GSPS, an analogue output usable to about 400 MHz, a frequency resolution of 0.23 Hz, and a narrow band spurious free dynamic range better than 80 dB. It carries a 1024 word by 32 bit RAM, a digital ramp generator, eight frequency and phase profiles and an inverse sinc filter. The clock is both the sampling rate and the frequency reference, which is why the resolution and the phase noise cannot be discussed separately.
0.23 Hz is one gigahertz divided by two to the thirty two
The accumulator is 32 bits wide, so the smallest frequency step at a 1 GSPS clock is 1e9 divided by 2^32, which is 0.2328 Hz. That number is exact and independent of the output frequency, but the accuracy of the output is not: a 1 ppm error in the reference clock is a 400 Hz error at a 400 MHz output, which is 1700 times the resolution step. In practice the reference, not the accumulator, sets the frequency accuracy, and a temperature compensated or oven controlled reference is what makes the 0.23 Hz meaningful.
The parts that shape the output
| Parameter | Value | Note |
|---|---|---|
| Internal clock | 1 GSPS | An external crystal or a reference with the internal multiplier |
| Converter resolution | 14 bits | Sets the amplitude resolution and the quantisation floor |
| Analogue output | Up to about 400 MHz | Beyond that the images and the sinc roll off dominate |
| Frequency resolution | 0.23 Hz | 1 GSPS over 2^32 |
| Phase noise | -125 dBc/Hz at 1 kHz on a 400 MHz carrier | Follows the clock source almost directly |
| Narrow band spurious free range | Better than 80 dB | Wideband spurious is a different and smaller number |
The converter output is not the radio output
A 1 GSPS converter has images at the clock minus the output frequency, and at 400 MHz those images sit at 600 MHz and above, which a low pass filter removes easily. At 450 MHz the image is at 550 MHz and the filter has to be sharp. The inverse sinc filter corrects the amplitude droop of the converter, not the images, so a board that pushes towards 500 MHz pays in filter complexity rather than in amplitude flatness. For most radios the practical ceiling is 400 MHz, and above that a mixing stage is the cheaper answer.
Frequency hopping is where the RAM earns its place
The RAM and the digital ramp generator allow frequency, phase and amplitude profiles to be played back without a new register write for every point. A chirp for a radar is written once into the RAM and triggered, and the timing resolution comes from the clock rather than from the interface. The eight profiles allow a channel list to be stored and selected by pin, which is much faster than a serial write and much more deterministic.
Sourcing a synthesizer with a long life ahead
Parts of this class are usually chosen for a platform that runs for a decade, so the availability question matters earlier than the price question. The ADC DAC cross reference page covers the converter family, the RF component sourcing page lists the synthesizer options, and end of life exposure is tracked on the obsolete part cross reference hub.