AD9862BSTZRL
Product Specifications
AD9862BSTZRL
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD9862BSTZRL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD9862BSTZRL: Mixed Signal Front End With a 12-Bit Receive and 14-Bit Transmit Path
The AD9862BSTZRL is the dual channel mixed signal front end from the AD9860 and AD9862 pair, and the vendor lists it as obsolete, so this page serves the boards that already carry it. The receive path has two 12-bit converters sampling at 64 MSPS with input buffers, programmable gain amplifiers and decimation filters; the transmit path has two 14-bit converters at 128 MSPS with interpolation filters, a digital Hilbert block and digital up-converters; and the package also contains a clock distribution block with a phase locked loop, programmable output clocks, an SPI port and auxiliary converters. The AD9860 in the same family is the 10-bit receive member, which is the difference that matters most when a part is being cross referenced. Broadband front end parts are compared from the ADC and DAC cross reference page.
What the numbers actually mean
Twelve bits over a 2 V peak to peak span is 488 uV per step, and fourteen bits over the same span on the transmit side is 122 uV. The receive rate of 64 MSPS is enough for a 20 MHz wide channel with margin for the decimation filters, and the transmit rate of 128 MSPS gives the interpolation stage room to move the images away from the carrier. Having both paths and the clock tree on one die is what made the part attractive in a broadband modem, where board area and phase coherence between channels matter more than the last bit of resolution.
| Parameter | Figure | What it decides in a build |
|---|---|---|
| Receive path | Dual 12 bit at 64 MSPS | 488 uV per step on a 2 V span, with PGA and decimation |
| Transmit path | Dual 14 bit at 128 MSPS | 122 uV per step, with interpolation and up-conversion |
| Digital blocks | Hilbert filter, digital up-converter, decimation | Channel shaping on the die rather than in an FPGA |
| Clock | Internal distribution with PLL | Both paths share one reference, which keeps them coherent |
| Auxiliary | DAC outputs, ADC inputs, sigma delta outputs | Control loops and calibration on the same part |
| Status | Obsolete at the vendor | Support for existing boards, not new ones |
Where it can surprise a build
Obsolete status puts the whole support question on the table. The usual alternatives are a last time buy, a pull from the channel, or a board respin onto a newer front end, and the second of those needs date codes and a functional test, because these parts have a serial interface and a configuration that a simple pin check does not exercise.
The two order codes in the family differ in the receive converter resolution, not in the transmit path. A board qualified with the 12-bit version will run with a 10-bit part and will not meet its noise figure, and the substitution is invisible until a sensitivity measurement. Anyone buying from stock should confirm which of the two the reel actually contains.
The integrated clock tree is the feature that is hardest to replace. A newer front end with better converters but an external clocking scheme changes the phase relationship between receive and transmit, which in a modem is a calibration that has to be redone rather than a component that has been swapped.
Applications and how it fits a broadband board
Broadband wireless equipment including MMDS and IEEE 802.16 systems, wireless LAN at 802.11, wideband cellular including WCDMA and the third and fourth generation standards, and broadband modems including residential gateways and power line networking. The part is a two way front end for a radio that has to transmit and receive on the same clock. For a line that has to keep building during an obsolescence event, how to verify a drop in replacement is the checklist for the substitution, and analog and mixed-signal ICs is where the replacement families are listed.
Questions buyers ask about this order code
Is the BSTZRL a different part from the BST? It is the same body with lead free finish and tape and reel. The electrical function does not change with the suffix, so a reel and a tube are the same converter.
Can the AD9860 be used in place of the AD9862? Only where the receive path can accept 10 bits instead of 12. The transmit path is the same, which makes the substitution look safe on a quick comparison and fail on a noise measurement.
What documentation matters most for a purchase? Date code, the country of assembly, and a functional test that exercises the SPI configuration and both converter paths. For an obsolete mixed signal part with an internal PLL, a pin continuity check says very little about whether the part works.
Request Quote — In Stock, 100% New & Original, Full Warranty