Contact Us

AD9747BCPZRL

Brand: Analog Devices
Analog Devices AD9747BCPZRL is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD9747BCPZRL — Analog & Mixed-Signal ICs | Superb Automation

AD9747BCPZRL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD9747BCPZRL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD9747BCPZRL: 630 pJ Per Sample Pair and the 80 dBc That Sets the Driver Budget

The AD9747 is a dual 16-bit current output converter running at up to 250 MSPS, in a 72-lead LFCSP, with LVCMOS inputs that can be wired as two ports or as one interleaved port. Its single carrier W-CDMA adjacent channel leakage ratio is 80 dBc at 61.55 MHz, and the whole device dissipates 315 mW from 1.8 V and 3.3 V rails.

Power per conversion, not power per device

315 mW at 250 MSPS is 630 pJ for each sample pair. That number is what decides whether the converter can sit under a four antenna radio without a dedicated heat path, and it is also the number that makes the part comparable with converters quoted in milliwatts per gigasample.

The published table, as the vendor states it

ParameterValue
Resolution and rate16 bit, up to 250 MSPS, dual
ACLR, single carrier W-CDMA80 dBc at 61.55 MHz
Full scale output current8.6 mA to 31.7 mA, programmable
Outputsdifferential current, useable beyond Nyquist
Auxiliary converterstwo 10-bit current DACs for offset nulling
Referenceinternal 1.2 V precision source
Supplies1.8 V and 3.3 V
Dissipation315 mW
Digital inputLVCMOS, dual port or interleaved single port
Package72-lead LFCSP, RoHS

Where the full scale current lands in a 50 ohm world

The programmable range spans 8.6 mA to 31.7 mA. Terminated in 50 ohm that is 1.85 mW, or 2.67 dBm, at the bottom and 25.1 mW, or 14.0 dBm, at the top, before the transformer ratio is applied. A board that assumed a fixed output level and now needs 6 dB more cannot get it from the digital side; it gets it from the full scale setting, and the spurious floor moves with that setting.

Interleaved port against dual port

One interleaved port halves the pin count on the digital side and doubles the rate each pin sees, which matters at 250 MSPS. Two ports let the two channels be clocked from separate sources or driven by a fabric that cannot reach 250 MSPS on a single bus. The choice is a routing and clocking decision made before the converter is ordered, and both are available on the same order code.

Buyer questions

Does the 16-bit resolution survive at 250 MSPS? Resolution is what the converter quantises, not what the analogue output delivers. The spurious and intermodulation figures at the intended carrier frequency are the ones to compare against the system budget, and the 80 dBc ACLR at 61.55 MHz is the vendor's published anchor.

Why would a radio use output above Nyquist? The output stage shifts energy into the image band, so a converter running at 250 MSPS can place a useable signal above 125 MHz without a second upconversion stage. The filter after the transformer then has to reject the band below it.

Category page: Analog and mixed-signal ICs. Converter equivalents are listed under ADC and DAC cross reference; transmit chain parts are grouped in RF component sourcing.

Request Quote — In Stock, 100% New & Original, Full Warranty