AD9172BBPZ
Product Specifications
AD9172BBPZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD9172BBPZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD9172BBPZ: the first member of the 12.6 GSPS family, and the 1.54 GSPS input that dates it
The AD9172BBPZ is the 144-ball BGA_ED body of the AD9172, a dual 16-bit RF DAC rated to 12.6 GSPS with three bypassable complex input channels per converter. It is the earliest of the four members that share this core, and the number that separates it from the later three is the 1.54 GSPS maximum complex input rate per channel against the 3.08 GSPS published on the AD9174, AD9175 and AD9176.
Published values
| Parameter | Value |
|---|---|
| Resolution | 16 bit, 12 bit in high density mode |
| DAC update rate | up to 12.6 GSPS |
| Complex input data rate | 1.54 GSPS per channel |
| JESD204B interface | 8 lanes at 15 Gbps, Subclass 1 |
| Input channels | 3 bypassable complex channels per RF DAC |
| Channel interpolation | 1, 2, 3, 4, 6 and 8 |
| Final interpolation | 1, 2, 4, 6, 8 and 12 |
| Main NCO | 48 bit at the DAC rate, synthesis to 6 GHz |
| Ultrawide modes | 3.08 GSPS at 16 bit, 4.1 GSPS at 12 bit |
| Two tone IMD | -83 dBc at 1.8 GHz, -7 dBFS per tone |
| SFDR | better than -80 dBc at 1.8 GHz, -7 dBFS |
| Power | 2.55 W at 12 GSPS in dual channel mode |
| Package | 144-ball BGA_ED, 10 mm x 10 mm, 0.8 mm pitch, metal lid |
A half rate input with the same output rate
1.54 GSPS complex is 3.08 Gsamples per second at 16 bit, or 49.3 Gbps, against the 120 Gbps that eight lanes at 15 Gbps provide. The link is used at less than half its capacity, which tells a buyer that the limitation is in the channelizer arithmetic of this generation rather than in the serial interface. The later members doubled the channelizer rate without changing the lane count.
In practice this means a board built around the AD9172 that wants a 600 MHz wide complex signal at 16 bit runs out of channelizer bandwidth, while the same board fitted with an AD9176 carries 1.2 GHz. The footprint, the rails and the lane count are the same, so the substitution is a register map and a firmware change, and the supplier question is which of the two can be obtained.
What the ultrawide mode does differently
Bypassing the channelizers gives 3.08 GSPS at 16 bit or 4.1 GSPS at 12 bit, both inside the link budget. The distinction from the interpolated modes is that the data reaches the DAC core without passing an interpolation filter, so the passband is flat to the Nyquist limit and the images that the filter would have removed have to be handled by the analogue reconstruction network.
That trade is worth making when the signal of interest sits in the first Nyquist zone and the reconstruction filter is a real component with a real transition band. It is the wrong trade when the signal is placed in the second or third zone with the NCO, because the images then fall where the filter cannot help.
The 2.55 W and the metal lid
2.55 W at 12 GSPS in dual channel mode is within 10 mW of the figure published for the later members, so nothing about the thermal plan changes between them. The lid and the via field under the 10 mm x 10 mm body are what carry that heat, and a board originally laid out for this part can take a later member without a thermal rework.
Where the earlier part differs in a system sense is the clock. The DAC PLL multiplies the reference to the 12.6 GSPS core rate, and the phase noise of that multiplication sets the error vector magnitude at high output frequencies. The PLL is documented on the same page as the converter for a reason, and its loop filter is part of the radio performance.
Obtaining the part
Because the four members share a footprint, a programme that was written around the AD9172 can move to the AD9176 when the wider channelizer is needed or when the earlier part is short, provided the firmware is ported and the register differences are accepted. That makes this order code one of the few in the high speed converter range where a second source question can be answered inside one vendor's family.
For a production line the reverse move is not free: firmware written for the later part does not necessarily run on the earlier one at the same channelizer settings, so a fallback plan has to be tested rather than assumed.
Two pages worth reading before a purchase order goes out are the ADC and DAC cross reference and the ADI second source page; the first lists what else fits the socket, the second is the test sequence for a drop in, and the obsolete part cross reference hub covers the case where the shortage is already on the line.
Two questions buyers ask
Is the AD9172BBPZ still in production? The vendor product page lists the family as active and this order code is the standard 144-ball BGA_ED body. Availability should still be confirmed against a current lead time before a build is committed, since the four members of the family are not stocked in equal depth.
Does this part support 3.08 GSPS complex input in the channelizers? No. The channelizers accept 1.54 GSPS complex. The 3.08 GSPS figure on this page belongs to the ultrawide mode at 16 bit, which bypasses the channelizers.