AD8361ARMZ
Product Specifications
AD8361ARMZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8361ARMZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8361ARMZ: A Mean Responding Detector Whose Output Is 7.5 V per Volt RMS
The AD8361 is a mean responding power detector for signal chains up to 2.5 GHz, with a calibrated rms response across a 30 dB input range and a conversion gain of 7.5 V per volt rms. It runs from a single supply between 2.7 V and 5.5 V, draws 3.3 mW at 3 V, and drops to under 1 uA in power-down. The part measures the mean of the waveform rather than its peak, which is the property that makes it usable on code division and quadrature amplitude modulated signals where the crest factor changes with traffic.
Why mean responding matters on a modulated carrier
A peak detector on a wideband code division signal reads the envelope peaks, and those peaks depend on how many codes are active, so the indicated power drifts with traffic even when the true rms power is constant. A mean responding detector squares, averages and takes the square root, so the reading tracks the actual power. The AD8361 does that with a transconductance based arrangement whose output is linear in rms input volts, 7.5 V per volt rms, which means the transfer function is a straight line with no logarithmic compression to calibrate out at every point.
The three reference modes and the 350 mV offset
The output can be referenced to ground, to an internal reference that offsets the zero signal output by 350 mV, or to the supply at one seventh of the rail, which is the supply divided by 7.5. The choice decides whether the detector can measure a signal that sits on a DC term and whether a single supply converter can read the bottom of the range. In ground reference mode the output at zero input is essentially the ground rail, so a converter with a 100 mV offset cannot resolve the lowest decade; in internal reference mode the 350 mV pedestal moves the zero signal away from ground, which costs 350 mV of output span but makes the bottom decade readable.
| Parameter | Value | What it decides |
|---|---|---|
| Frequency range | Up to 2.5 GHz | Covers cellular and ISM transmit bands |
| Input range | 30 dB at 2.5 GHz | Thirty to one in voltage, fifteen to one in power |
| Maximum input | 700 mV rms, 10 dBm into 50 ohm | Above this the input stage is overdriven |
| Conversion gain | 7.5 V per volt rms | 700 mV rms gives 5.25 V, beyond a 5 V rail |
| Linearity | Plus or minus 0.25 dB | Across the range, not at one point |
| Reference modes | Ground, internal, supply | Sets where the zero signal output sits |
| Internal reference offset | 350 mV | Costs output span, buys the bottom decade |
| Supply reference | Supply divided by 7.5 | Tracks the rail, so the reading moves with it |
| Supply | 2.7 V to 5.5 V | 3.3 mW at 3 V, 0.55 mA |
| Power-down | Under 1 uA | A duty cycled monitor, not a free running one |
| External filter | Capacitor sets averaging time | Trade between response speed and ripple |
| Package | 8-lead MSOP and 6-lead SOT-23 | The SOT-23 version is ground reference only |
The output span against the rail
At 7.5 V per volt rms, a 5 V rail is reached at 0.667 V rms of input, which is 9.5 dBm into 50 ohm. The specified maximum input is 700 mV rms, or 10 dBm, so the top of the input range and the top of the output range are within half a decibel of each other on a 5 V supply. On a 3 V supply the output saturates at 0.4 V rms of input, and the usable input range shrinks unless the part is run in a reference mode whose offset is subtracted, which is why the supply voltage and the reference mode have to be chosen together.
Averaging and response time
The internal filter can be extended with an external capacitor, and that capacitor sets how fast the output follows a change in power. A detector used inside a closed loop transmitter needs the output to settle inside the loop's time constant; a detector used only as a monitor can average over milliseconds and reject the modulation envelope entirely. The trade is visible on a scope: with a small capacitor the output carries the envelope, with a large one it carries the mean, and the residual ripple is what the loop has to ignore.
Buying a detector against a specific modulation
The part is chosen by the waveform it has to measure, the reference mode the converter can read, and the supply that is available, and the order code fixes the package and therefore the reference modes that are available. A detector bought as a second source has to be compared on its response to crest factor, not just on its conversion gain. Current availability is tracked through RF component sourcing, and the wider question of what else a radio front end needs is set out in RF procurement. Where the original part is no longer the one being built, the replacement route is in obsolete RF part replacement.