AD8347ARUZ-REEL7
Product Specifications
AD8347ARUZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8347ARUZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD8347ARUZ-REEL7: an 800 MHz to 2.7 GHz demodulator and the 30 dB of image rejection its balance buys
The AD8347 is a single chip broadband quadrature demodulator covering 800 MHz to 2.7 GHz, with 65 dB of linear in dB automatic gain control split between the RF input and the baseband outputs. The in phase and quadrature signals are brought off chip for filtering before the final output amplifiers, and those amplifiers let the DC common mode be set so the part drives a dual I/Q converter directly. Demodulation bandwidth is 50 MHz, quadrature phase accuracy is 3 degrees, amplitude balance is 0.3 dB, input third order intercept is plus 12 dBm, noise figure is 11 dB, and the local oscillator needs only minus 10 dBm of drive. Supply is 2.7 V to 5.5 V with a power down mode, the body is a 28-lead TSSOP, and the reel suffix is REEL7.
What the vendor page states
| Parameter | Value |
|---|---|
| RF range | 800 MHz to 2.7 GHz |
| Gain control | 65 dB linear in dB, split between RF input and baseband outputs |
| Demodulation bandwidth | 50 MHz |
| Quadrature phase accuracy | 3 degrees |
| Amplitude balance | 0.3 dB |
| Input intercept | plus 12 dBm |
| Noise figure | 11 dB |
| LO drive | minus 10 dBm |
| Supply | 2.7 V to 5.5 V single, with power down |
| Package and range | 28-lead TSSOP, minus 40 C to plus 85 C |
Three degrees and 0.3 dB work out to 30 dB of image rejection
The two balance figures decide how much of the unwanted sideband survives in a direct conversion receiver. With 0.3 dB of amplitude error and 3 degrees of phase error the image sits 30 dB below the wanted signal, and that is the number a system budget has to carry. Tighten the same sum to 0.1 dB and 1 degree and the rejection rises to 39.6 dB, which is why the local oscillator quadrature source usually costs more than the demodulator. It also explains why a part with a 3 degree specification is a good fit for a wideband link with 30 dB of margin and a poor fit for a narrowband one that expects 45 dB.
Sixty five dB of gain control in two places
The control range is divided between the RF input and the baseband outputs after the mixers. Putting part of the attenuation ahead of the mixer keeps a strong signal from compressing it, and putting the rest after the mixer keeps the baseband amplifiers from clipping a weak one. The split is what allows the same part to handle a received level that moves by 65 dB without an external step attenuator, and it is the reason the input intercept of plus 12 dBm is quoted at a specified gain rather than as a single number. In voltage terms plus 12 dBm into 50 ohm is 0.32 V peak, which is a useful cross check when the preceding stage is being chosen.
Eleven dB of noise figure is the price of the gain
An 11 dB noise figure is 3361 K of noise temperature, which is high for a first stage and acceptable for a second one. In a receiver that puts a low noise amplifier ahead of this part, the system figure is set by that amplifier and the 11 dB is diluted by the gain in front of it. In a receiver that feeds the demodulator from a filter directly, the 11 dB becomes the dominant term and the sensitivity calculation has to start from it. That is the decision the 800 MHz to 2.7 GHz band and the integrated gain control force on the user, and it is settled before the part is chosen.
The baseband side is left open on purpose
Because the I and Q signals leave the chip before the final amplifiers, the baseband filter is the user's choice and its loss, group delay and stopband all sit between the mixer and the output stage. The output amplifiers then set the common mode for the converter that follows, which removes the level shifting network that a DC coupled interface would otherwise need. The RF component sourcing page lists the demodulators and modulators that cover this band, the obsolete part hub tracks life cycle status on the I/Q family, and the analog and mixed signal category page holds the rest of the RF and IF parts.
Request Quote — In Stock, 100% New & Original, Full Warranty