AD8044ARZ-14
Product Specifications
AD8044ARZ-14
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8044ARZ-14 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8044ARZ-14: Four 150 MHz Channels at 2.75 mA Each
The AD8044ARZ-14 is the quad member of the family that also includes the single AD8041 and the dual AD8042, in a 14-lead SOIC. Each of the four amplifiers has 150 MHz of bandwidth at a gain of plus one, 170 V per microsecond of slew rate, 40 ns of settling to 0.1 percent and 30 mA of output drive, while drawing 2.75 mA. The output swings to within 25 mV of either rail, the input common mode extends 200 mV below ground and to within 1 V of the positive rail, and the part does not phase reverse with inputs 1 V beyond the supplies. Into a 150 ohm load at a gain of two, differential gain error is 0.06 percent, differential phase is 0.15 degrees, gain flatness is 0.1 dB to 12 MHz, and total harmonic distortion is minus 68 dBc at 5 MHz.
Published values
| Parameter | Value |
|---|---|
| Configuration | Quad voltage feedback amplifier |
| Bandwidth | 150 MHz per amplifier at a gain of plus one |
| Slew rate | 170 V per microsecond |
| Settling time | 40 ns to 0.1 percent |
| Quiescent current | 2.75 mA per amplifier, 13.1 mA maximum total |
| Output swing | Within 25 mV of either rail |
| Output current | 30 mA, 0.5 V from the rails |
| Input range | 200 mV below ground, within 1 V of the positive rail |
| Video | 0.1 dB flat to 12 MHz, 0.06 percent and 0.15 degree |
| Distortion | Minus 68 dBc total harmonic at 5 MHz |
| Supply | 3 V to 12 V single, plus and minus 6 V dual |
| Body | 14-lead SOIC and 14-lead PDIP |
Eleven milliamps for four channels
Four amplifiers at 2.75 mA are 11 mA typical and 13.1 mA maximum, which on 5 V is 55 mW to 65 mW for the whole quad. That is the argument for the quad in a multi-channel instrument: four channels of 150 MHz amplification for less current than two channels of a typical 6 mA part, and one package instead of four. The trade is thermal and electrical coupling, because all four share the supply pins and the die, so a fast large signal on one channel appears as a small disturbance on the others. In a multiplexed front end where only one channel is active at a time this does not matter; in a four channel simultaneous acquisition it does, and the answer is either separate packages or careful supply decoupling at each pin.
Thirty milliamps against fifty on the dual
The quad drives 30 mA per output against 50 mA on the AD8042 dual, because the package has to dissipate four output stages. That difference decides which member of the family goes where: a video distribution amplifier that drives cables wants the dual, and a multi-channel buffer that drives converter inputs wants the quad. The 0.5 V from the rails at which the current is quoted is the same in both, so the comparison is direct. A board that assumes the quad is four times the dual will find its cable drive short of current, and the symptom is a compressed sync pulse rather than a missing output.
Settling and the multi-channel converter
Forty nanoseconds to 0.1 percent is fast enough for a 1 MSPS converter's acquisition window even with a channel change in front of it, and four channels in one package keep the propagation delay matched because the four amplifiers sit on the same die at the same temperature. In an ultrasound receive chain or a four channel simultaneous sampling system, that matching is worth more than an extra 10 MHz of bandwidth, since the reconstruction assumes the channels are aligned. The 0.1 dB flatness to 12 MHz is slightly lower than the dual's 14 MHz, which is the price of the quad's lower current per channel.
Single supply operation from 3 V to 12 V
The part is specified at 3 V, 5 V and plus and minus 5 V, so the same order code covers a 3.3 V digital board and a plus and minus 5 V analog board. On a 3 V single supply the input range is minus 0.2 V to 2 V and the output reaches within 25 mV of both rails, so a mid scale bias of 1.5 V leaves 0.5 V of input headroom at the top, which limits the signal to about 1 V peak to peak. That is the real constraint on a 3.3 V board, and it is why a 5 V rail is still preferred for a signal chain that needs 2 V peak to peak of swing.
The 14-lead body and its thermal path
The 14-lead SOIC has a wider body than the 8-lead and a correspondingly lower thermal resistance, which is what allows four output stages in one package. At 13.1 mA maximum on a 12 V rail the quiescent dissipation is 157 mW before any load current, and each output driving 30 mA at a 2 V drop adds 60 mW. A board that uses all four outputs at high current on a 12 V rail is at the point where the copper under the package and the airflow decide the junction temperature, and that is a mechanical decision rather than an electrical one. The amplifier cross reference page groups the quad parts by current and drive, the pin to pin cross reference page lists the bodies that share a footprint, and the component lead time solutions page shows what is available.