AD7928BRUZ
Product Specifications
AD7928BRUZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7928BRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD7928BRUZ: 1 MSPS Across Eight 12-Bit Channels
The AD7928BRUZ is the 1 MSPS member of the family that starts at the 8 bit AD7908 and the 10 bit AD7918, in the same 20-lead TSSOP and with the same pinout. It converts eight single ended inputs at up to 1 MSPS on a single 2.7 V to 5.25 V supply, dissipates 6 mW maximum on 3 V and 13.5 mW on 5 V, and holds 70 dB minimum signal to noise and distortion at a 50 kHz input. At 1 MSPS the whole cycle is 1 us, so the board around it, not the converter, decides whether the throughput is usable: the serial clock at 20 MHz spends 800 ns on conversion and leaves roughly 200 ns for the sample and hold to acquire the next channel.
Published values
| Parameter | Value |
|---|---|
| Resolution | 12 bit, no missed codes |
| Throughput | 1 MSPS maximum |
| Analog inputs | Eight single ended, with channel sequencer |
| Family | AD7908 8 bit, AD7918 10 bit, AD7928 12 bit, same pinout |
| Supply | 2.7 V to 5.25 V |
| Power | 6.0 mW max at 1 MSPS on 3 V, 13.5 mW max on 5 V |
| Supply current | 2 mA max on 3 V, 2.7 mA max on 5 V |
| SINAD | 70 dB min at 50 kHz |
| Input bandwidth | In excess of 8 MHz |
| Shutdown | 0.5 uA maximum |
| Logic supply | VDRIVE, independent of AVDD |
| Body | 20-lead TSSOP, qualified for automotive applications |
Two hundred nanoseconds of acquisition
The acquisition window is the number that breaks boards. With 1 us between conversions and about 800 ns of it used by conversion and readback at a 20 MHz clock, the track and hold has roughly 200 ns to charge its sampling capacitor from the source. A multiplexer feeding eight channels makes this worse, because the source for the new channel has to settle from the previous channel value through the series resistance of the switch and the source impedance. A 1 kohm source with a few tens of picofarads gives a time constant far longer than 200 ns, so an unbuffered resistive divider will not survive here. Either buffer the inputs or slow the clock, and note that slowing the clock lengthens conversion and keeps the same shortfall, so buffering is the real answer.
Running the whole set at 1 MSPS is not the normal case
Eight channels at 1 MSPS is 125 kSPS per channel, and on 5 V that is 13.5 mW of converter plus the driver current. The sequencer is what makes the part economical: a host can program a sequence of two or three channels and convert only those, or can run a short sequence continuously and jump to a single channel on demand. Because the part has no pipeline delay, a conversion started on a given channel returns that channel's result, which removes the channel tagging that pipelined converters need. That is also the reason the part appears in motor control and power monitoring, where the sample instant has to line up with a switching event.
Four codes per millivolt and where the twelfth bit goes
On a 2.5 V reference a 12 bit code is 610 uV, and 70 dB of SINAD is 11.3 effective bits against the 74 dB of an ideal 12 bit part. For a nominal 2.5 V input that means the noise is around 0.25 mV RMS, so a single reading of a steady signal scatters over about one code. Averaging sixteen readings reduces that scatter by four and recovers most of the missing bit, which is why a 1 MSPS converter used at 50 kSPS with averaging outperforms a 50 kSPS converter in the same socket. The internal range can also be set to twice the reference, which doubles the span to 5 V and doubles the code size with it, so the absolute accuracy does not improve, only the headroom.
Pin compatible ladder from 8 to 12 bits
The three parts in the family share a pinout, so a board built for the 8 bit version can be populated with the 12 bit version without a change, which is a normal way to start a platform at a lower cost and upgrade later. What does not carry across is the timing budget at full rate, and neither does the automotive qualification, which is attached to specific order codes rather than to the whole family. The pin to pin cross reference page lists the order codes that share this footprint, the ADI part second source page covers the grades that are genuinely equivalent, and the lead time page shows the current availability position.