Contact Us

AD7829BRUZ

Brand: Analog Devices
Analog Devices AD7829BRUZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7829BRUZ — Analog & Mixed-Signal ICs | Superb Automation

AD7829BRUZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7829BRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD7829BRUZ: Eight Channels at 2 MSPS, Sequenced in Hardware Rather Than in Firmware

The AD7829 is the eight channel member of the AD7822 family: the same 8-bit half flash converter with its 420 nanosecond conversion time, the same on-chip track and hold, the same 2.5 V reference trimmed to 2 percent and the same parallel port with an end of conversion pulse, extended to eight single ended inputs in a 28-lead body. Where the single channel part is a fast front end for one signal, this one is a scanner, and the question it answers is how to sample eight channels quickly without making the host run the multiplexer.

What eight channels of 8-bit data costs in bus time

At 2 MSPS with a 420 nanosecond conversion, one conversion cycle is 500 nanoseconds, so eight channels complete a full scan in 4 microseconds. The data is 8 bits per channel and the port is 8 bits wide, so the host reads one byte per conversion, which at 2 MSPS is 2 Mbyte per second of sustained bus traffic. That is not a small load, and it is why the part is aimed at systems with a direct memory path or a processor with a fast parallel port. A host that cannot absorb 2 Mbyte per second should run the converter more slowly, which costs nothing in resolution and reduces the bus load proportionally.

Two volts peak to peak on a 3 V supply is 7.8 mV per code

The input span follows the supply: 2 V peak to peak with a 3 V supply and 2.5 V peak to peak with 5 V, both within 10 percent, and the mid point of the span is set by the VMID pin. An 8-bit code is therefore 7.8 mV or 9.8 mV. For a scanner looking at eight similar channels, such as eight supply rails or eight switch states, that resolution is adequate and the speed is the point. For a scanner looking at eight low level sensors it is not, and the answer is a higher resolution part with fewer channels rather than an amplifier on every input.

ParameterValueWhat it decides
ChannelsEight single endedFull scan every 4 microseconds at 2 MSPS
Resolution8 bits7.8 mV per code on a 3 V supply
Conversion time420 nanoseconds500 nanoseconds per conversion cycle
Throughput2 MSPS maximum2 Mbyte per second across the bus
Reference2.5 V on chip, 2 percentAbsolute accuracy set by the reference tolerance
Input span2 V peak to peak at 3 V, 2.5 V at 5 VScale changes with the supply, not with a register
Span centreVMID pinCentred where the signal already sits
Supply3 V or 5 V, both plus or minus 10 percentTwo defined operating points
Interface8-bit parallel port, end of conversion pulseHardware sequencing possible without a host
PowerAutomatic power-down after each conversionAverage current follows the sample rate
Package28-lead TSSOP, SOIC or 0.6 inch DIPWide body options for through hole builds

Reference tolerance is the accuracy limit, not the converter

The on-chip reference is trimmed to 2 percent, which on a 2.5 V span is 50 mV, or more than six codes at 8 bits. For a ratiometric measurement, where the sensor and the reference share a supply, that tolerance cancels. For an absolute measurement, it does not, and no amount of converter linearity recovers it. A product that needs better than 2 percent absolute accuracy has to either calibrate the reference in production or drive the reference pin from an external source, and the family allows both.

Where the part fits

Data acquisition and digital signal processor front ends, disk drives, mobile communication systems and subsampling receivers are the applications, with the eight channel form adding multichannel monitoring of fast events to that list. A motor controller that needs eight currents or voltages sampled inside one switching period is the classic case: 4 microseconds of scan time fits inside a 50 microsecond period, and the hardware conversion pulse can start the sequence without firmware intervention. Where the signal is single, the AD7822 does the same job in a smaller body; where four channels suffice, the AD7825 sits between them with the same pins and timing. For sourcing comparisons, the ADC and DAC cross reference page lists the family, the vendor consolidation page covers bringing several converter codes under one supplier, and the how to verify a drop in replacement page covers the checks before a channel count change is approved.

VMID decides where the two volt span sits

The input span is 2 V peak to peak on a 3 V supply, which means plus or minus 1 V around the level on the VMID pin, and that level is a board decision rather than a register value. With VMID tied to 1.5 V, the middle of a 3 V rail, the eight channels accept 0.5 V to 2.5 V and one code is 7.8 mV. With VMID at 1.0 V the window becomes 0 V to 2.0 V, which suits a signal referred to ground, and with VMID at 2.0 V it becomes 1.0 V to 3.0 V, which suits a signal riding on a supply derived bias. A signal that crosses the chosen window clips at the rail and returns a plausible full scale code, so the window has to be checked against the signal's worst case offset, not its nominal level.