AD7814ARTZ-REEL7
Product Specifications
AD7814ARTZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7814ARTZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD7814ARTZ-REEL7: a 10 bit temperature to digital converter in a 6-lead SOT-23
What this order code is
AD7814ARTZ-REEL7 is a complete temperature monitoring channel in a 6-lead SOT-23: a band gap temperature sensor, a 10 bit converter and a serial interface in one package. It measures ambient temperature from minus 55 to plus 125 degrees C with a resolution of 0.25 degrees C per count and an accuracy of plus or minus 2 degrees C, and it reports the result over an interface compatible with SPI, QSPI and MICROWIRE as well as with DSP serial ports. ARTZ is the SOT-23 body and REEL7 is the reel.
The supply range is 2.7 V to 5.5 V and there is a standby mode entered over the serial interface that takes the current down to about 1 microamp. An 8-lead MSOP body exists in the same family for boards that cannot take the smaller package. There is no external sensor, no calibration step and no linearisation table, so the part is a digital thermometer rather than an analog front end.
Parameters as published
| Item | Value |
|---|---|
| Resolution | 10 bit, 0.25 degree C per count |
| Accuracy | plus or minus 2 degrees C |
| Measurable range | minus 55 C to plus 125 C |
| Operating range | minus 40 C to plus 125 C |
| Supply voltage | 2.7 V to 5.5 V |
| Interface | SPI, QSPI, MICROWIRE and DSP compatible |
| Standby current | about 1 microamp |
| Package | 6-lead SOT-23, 8-lead MSOP alternative |
| External components | none required |
Numbers that decide the application
The resolution and the accuracy are two different statements and the gap between them is the useful number. One count is 0.25 degrees C, so the plus or minus 2 degree accuracy is about eight counts. Four counts of quantisation error are therefore a quarter of the error budget and the sensor itself is the rest. A product that needs one degree C of absolute accuracy cannot get there with this part by averaging, because averaging removes noise and not offset.
The measurable range is wider than the operating range: minus 55 to plus 125 degrees C is what the sensor reports, while the part is specified over minus 40 to plus 125. A board that has to log a cold chamber excursion below minus 40 is outside the guaranteed operating range even though the converter still produces codes.
Standby current of 1 microamp is 8.76 mAh across a year, so a battery instrument that polls temperature once a second can leave the part in standby between conversions and pay almost nothing. The conversion itself is short and the interface is a read of a register, so the average current is set by the polling rate rather than by the part.
Selection and cross reference notes
The comparison that matters here is resolution against accuracy against package. A 12 bit part with the same plus or minus 2 degree accuracy offers finer numbers and no better measurement, and a part with plus or minus 0.5 degree accuracy in the same SOT-23 costs more. The decision should start from the accuracy the product needs and work back, because resolution is the cheapest of the three to buy and the easiest to mistake for accuracy.
Interface compatibility is the second check. The part speaks SPI and MICROWIRE and also works with DSP serial ports, but the frame length, the clock polarity and the way the standby command is sent are code changes rather than hardware changes, so a substitute with the same footprint is not free. Boards that already have a temperature channel elsewhere on the bus should confirm the chip select arrangement before adding this one.
Where it fits
The vendor lists hard disk drives, personal computers, electronic test equipment, office equipment, domestic appliances and process control. In practice the part goes where a single local temperature reading is needed next to a power device, a processor or a battery, and where the board has a serial port free but no room for an analog front end plus a reference. Buyers who need the family view can start at the analog and mixed signal category page, and teams that need a temperature channel as part of a larger signal chain often work from the data converter cross reference page.
Buying notes
ARTZ is the 6-lead SOT-23 body, REEL7 is the 7 inch reel. The same family name in an RMZ body is the 8-lead MSOP, which is a different land pattern. There is no grade letter on this part, so the body and the packing are the only fields that vary, and both are worth stating on the order.
Sourcing notes and next step
For production the questions are the accuracy the product actually needs, the package the board can take, and whether the part is polled or left running. We quote the AD7814 codes against a bill of materials and confirm the body and reel against the line. Send the codes, quantities and required date through the BOM shortage recovery page and we will answer with availability and alternatives where the exact body is short.
Request Quote — In Stock, 100% New & Original, Full Warranty