AD7809BSTZ
Product Specifications
AD7809BSTZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7809BSTZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD7809: Eight 10-Bit Channels Loaded in Parallel, Centred on a Bias Point
The AD7809 is an octal 10-bit digital to analog converter with a parallel loading interface, running from a 3.3 V to 5 V supply with 10 percent tolerance, carrying an on-chip 1.23 V reference and a per channel output stage whose transfer function is expressed as VBIAS plus or minus VSWING rather than as a plain 0 to full-scale span. That structure is the point of the family: the outputs are meant to trim around a bias point, not to swing from ground to a rail. A system control register handles all channels together, channel control registers handle each one, and every DAC has a double buffered input so all outputs can be updated at once from the LDAC pin.
Why a converter would be built around a bias point
A trim DAC in a signal path usually sits on a node that is already biased at half supply or at a reference midpoint, and what the loop needs is a small controlled offset around that point. A rail to rail converter in the same position would need an external amplifier and a resistor network to shift and attenuate its output, and that network brings its own gain error and drift. Expressing the output as VBIAS plus or minus VSWING puts the shift inside the converter, where the sub DAC that moves the transfer function is trimmed with everything else on the die. The cost is that the part is not a general purpose rail to rail source: a load that expects 0 V to 3 V from a 3.3 V rail is better served by a conventional converter from the same family table.
Values and pin behaviour
| Parameter | Value | Note |
|---|---|---|
| Channels, resolution | 8 channels, 10 bits | AD7804 is quad serial, AD7805 is quad parallel, AD7808 is octal serial |
| Loading | Parallel data bus | Serial members of the family share the register map |
| Output form | VBIAS plus or minus VSWING | VSWING derived internally from VBIAS |
| Reference | 1.23 V on chip | Two external reference inputs available |
| Supply | 3.3 V to 5 V, 10 percent | All CMOS construction, low power |
| Update | Double buffered, LDAC for simultaneous update | Asynchronous LDAC input |
| Power control | Power-down mode, standby per channel or all channels | Power-on reset included |
| Reset and clear | CLR pin returns outputs to a defined state | Reset state is set by the system control register |
Standby per channel saves more than it looks
An octal trim converter in an instrument usually has one or two channels that are set once at calibration and never move again, and six that change with every mode. Per channel standby lets the firmware put the static ones to sleep, which saves the output stage current without losing the register contents, and the part returns to the stored code rather than to zero. The same capability matters at power up: the power-on reset drives the outputs to a known state, so an amplifier downstream is not driven into a rail while the processor is still booting. Double buffering completes the picture, since a channel can be loaded without moving the output until the whole group is ready.
Where it is still the right part
Optical disk drives, instrumentation and communication systems, process control, trim potentiometer replacement and automatic calibration are the applications the family was built for, and the last two explain why it survives. Replacing a mechanical trim pot with a digital channel means the calibration becomes a stored number, and a production line can calibrate a board in software rather than with a screwdriver. Automatic calibration means the instrument can correct itself against an internal reference at start up, which needs a converter whose output does not move when the supply moves, and an on-chip reference plus a bias-referenced output gets most of the way there. For a board with more than eight trims the octal part pays for itself in board area alone.
Procurement and second source
The family has been in the catalogue for a long time, so parts arrive from broker stock and the package and loading style have to be read from the full order code rather than from the base number. The ADC DAC cross reference lists the family members and their interfaces, the obsolete part cross reference hub covers the substitution path when a specific member goes away, and pin to pin cross reference covers the cases where a member of the same family drops in without a board change.