Contact Us

AD7801BRUZ-REEL7

Brand: Analog Devices
Analog Devices AD7801BRUZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7801BRUZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

AD7801BRUZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7801BRUZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD7801BRUZ-REEL7: A 9.77 mV Step and a 1.2 us Settling Time

The AD7801 is a single 8-bit voltage output converter with a parallel microprocessor interface, running from 2.7 V to 5.5 V. The output buffer swings rail to rail and settles in 1.2 microseconds typical. Reference can come from the supply through the internal path or from an external source at the REFIN pin, and the part can be cleared asynchronously with the CLR input. It draws 1.75 mA maximum at 3.3 V, falls to 1 microamp in power-down, and comes in 20-lead SOIC and TSSOP bodies. The vendor lists six part models and a 1ku price starting at $3.98.

The step size is set by the reference, not by the converter

Eight bits over a 2.5 V full scale is 9.77 mV per step. Over 5 V it is 19.53 mV. A buyer who needs a finer step does not solve it with this part at any supply voltage; the next resolution up is the answer. Where 8 bits is enough, the useful question is what the step does to the load: a 9.77 mV step into a 10 ohm actuator is 0.98 mA, and that current step is what the receiving circuit sees.

Settling and the write rate are two different limits

1.2 microseconds of settling allows 833 thousand updates per second. The parallel interface can write faster than that, so a controller that clocks the port at its own pace will outrun the output. The number to put in a timing budget is the settling figure, and the interface is only the transport.

The published table, as the vendor states it

ParameterValue
Resolution and channels8 bit, single channel
Supply+2.7 V to +5.5 V
Output bufferrail to rail
Settling time1.2 us typical
Referenceinternal from VDD, or external at REFIN
Interfaceparallel, double buffered, DSP compatible
Clear inputasynchronous CLR
Supply current at 3.3 V1.75 mA maximum
Power at 3.3 V5.77 mW maximum
Power-down current1 uA maximum at 25 C
Packages20-lead SOIC, 20-lead TSSOP
Part models listed6

Five mW against 3 microwatts

The vendor states the part draws typically 5 mW at 3 V, which is 1.67 mA, and that power-down brings it below 3 microwatts. The ratio between the two states is over 1700 to 1. For a battery instrument that holds an output between events, the power-down state is the one that sets battery life, and the wake-up behaviour is the figure to ask for before committing to a duty cycle.

Double buffering and the clear pin

The input register and the DAC register are separate. Data loads into the input register on the rising edge of CS or WR, and a second write moves it to the DAC. That lets a controller stage a new code while the old one stays on the output, which is what a two channel or multi board system needs when the update has to be simultaneous. The CLR input returns the output to zero without a bus transaction, which is the safe state at power up for a drive or a bias.

Selection notes

  • External reference at REFIN allows a full scale other than the supply, and the reference quality then sets the accuracy.
  • The asynchronous clear is a hardware path, independent of the bus and of the controller state.
  • Both package options are 20-lead, so a board can move between SOIC and TSSOP with a footprint change only.
  • Parallel interface suits a processor with a data bus already present; a serial part is the choice where pins are scarce.

Buyer questions

Can it run from 3.3 V and still reach 5 V on the output? No. The output buffer swings rail to rail within the supply, so the full scale cannot exceed the supply. A 5 V full scale needs a 5 V rail or an external amplifier stage.

Does power-down keep the last code? The vendor describes a power-down function that reduces current to 1 microamp; the state of the output during and after that mode is set out in the datasheet timing, and that is the section to read before using power-down as a hold state.

Family page for the category: Analog and mixed-signal ICs. For converter families see ADC and DAC cross reference, and for consolidating a converter line into one shipment see BOM shortage recovery.

Request Quote — In Stock, 100% New & Original, Full Warranty