Contact Us

AD7699BCPZ

Brand: Analog Devices
Analog Devices AD7699BCPZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7699BCPZ — Analog & Mixed-Signal ICs | Superb Automation

AD7699BCPZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7699BCPZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD7699BCPZ: 5.2 uW at 100 Samples per Second on a 5 V Supply

The AD7699 is a 16 bit, eight channel successive approximation converter with a 500 kSPS throughput rate, an internal 4.096 V reference, a channel sequencer and a selectable one pole filter. It dissipates 26 mW at 500 kSPS and 5.2 uW at 100 samples per second, with a standby current of 50 nA, and it runs from a single 5 V supply with a 1.8 V to 5 V logic interface. The dynamic range is 93.3 dB, signal to noise and distortion is 91.5 dB at 20 kHz, and total harmonic distortion is -97 dB.

The power figure that matters is the one at your rate

Between 500 kSPS and 100 SPS the dissipation falls by a factor of 5000, from 26 mW to 5.2 uW. That is not a standby mode; the converter is fully operational and each conversion is a complete, accurate result. The mechanism is that the part powers up for the conversion and shuts down between them, and the interface is fast enough that the wake up and the conversion fit inside the read cycle. A battery instrument that samples a sensor once a second therefore sees microwatts rather than milliwatts, and the reference and the amplifier around it become the dominant load.

No pipeline delay and the sequencer

The converter is a successive approximation type, so the result returned belongs to the sample just taken, with no pipeline delay to carry in a control loop. The eight channels can be scanned by an internal sequencer, with the channel list held in a register, so the processor reads eight results per frame. The sequencer can also be set to a shorter list, which raises the per channel rate on the channels that matter.

ParameterValueWhat it decides
Resolution16 bit, no missing codes62.5 uV per code on the internal reference
ChannelsEight, single ended or differentialFour differential pairs in the same package
Throughput500 kSPS2 us per conversion
Integral nonlinearityPlus or minus 0.5 LSB typical1.5 LSB maximum, 23 ppm of full scale
Dynamic range93.3 dB15.2 effective bits
Signal to noise and distortion91.5 dB at 20 kHzFalls with input frequency, not with rate
Total harmonic distortion-97 dB at 20 kHzAbout two codes at 16 bits
ReferenceInternal 4.096 V, or externalInternal reference needs no buffer
Input range0 V to the referenceRail to rail unipolar
Power at 500 kSPS26 mWFully operational at full rate
Power at 100 SPS5.2 uWThree decades below a coin cell budget
Standby current50 nAThe off state between conversions
Package20-lead LFCSP or WLCSP4 mm square, or a wafer level die

The internal reference and its drift

The internal reference removes an external part and its decoupling, but it carries its own drift term which enters the transfer function directly. A 16 bit absolute measurement on the internal reference is only as stable as that reference, and a system that needs 16 bits over temperature has to either calibrate against it or use an external reference with a published figure. The internal reference is the right choice when the measurement is ratiometric or when the temperature is controlled.

The one pole filter and the sampling instant

The selectable one pole filter sits ahead of the converter and works as a simple low pass, which is useful for a sensor with a bandwidth well below the Nyquist frequency and useless for rejecting a strong out of band tone. The sampling instant is defined by the conversion start, and the aperture is short enough that a 20 kHz input at full scale does not lose more than the specified distortion allows. A higher input frequency is limited by the track and hold, not by the conversion rate.

Buying a converter for a duty cycled instrument

The comparison across candidates is power at the actual rate rather than at the maximum, the reference arrangement and the channel count. The order code fixes the package, and the two packages are not interchangeable on a board. Availability is tracked through ADC DAC cross reference, and the wider question of what a battery powered instrument needs around its converter is set out in medical device components. Where a board is being reworked around a short part, the checks are in how to verify a drop in replacement.