LTC2500IDKD-32#PBF
Product Specifications
LTC2500IDKD-32#PBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTC2500IDKD-32#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
LTC2500IDKD-32#PBF: 32 bits of code, about 24 bits of real resolution
The LTC2500IDKD-32#PBF is an Analog Devices 32-bit oversampling analog to digital converter with a configurable digital filter inside the package. It runs from a single 2.5 V supply with an external reference from 2.5 V to 5.1 V, converts at up to 1 Msps, and presents two output codes at once: a 32-bit digitally filtered low noise code, and a 32-bit composite code made of a 24-bit differential result, a 7-bit common mode result and an overrange bit, available every conversion with no latency. The filter downsamples the SAR stream, which relaxes the anti-aliasing requirement in front of the part. Integral nonlinearity is plus or minus 0.5 ppm typical, signal to noise is 104 dB typical at 1 Msps, dynamic range is 148 dB typical at 61 sps, and 32-bit no missing codes is guaranteed. Power is 24 mW at 1 Msps, and the interface is SPI compatible from 1.8 V to 5 V. It is on the analog and mixed-signal IC line card.
What 148 dB actually buys at the bottom of the range
On a 5.1 V reference, 148 dB of dynamic range is 203 nV rms of noise. One 32-bit LSB at the same reference is 1.187 nV, so the noise sits 171 LSB above the code size. The converter therefore produces 32-bit codes whose bottom bits are noise, and the useful resolution at 61 sps is around 24 bits, with the remaining bits available for averaging in the digital domain. At 1 Msps the same part delivers 32.2 uV rms, which is 17 bits of effective range, so the throughput and the resolution are traded directly and the filter setting is what sets the trade.
| Parameter | Vendor figure | Derived figure |
|---|---|---|
| Resolution | 32 bits, no missing codes | 1.187 nV per code at 5.1 V reference |
| Dynamic range | 148 dB at 61 sps | 203 nV rms, 171 code sizes of noise |
| Signal to noise | 104 dB at 1 Msps | 32.2 uV rms, 17 effective bits |
| Linearity | plus or minus 0.5 ppm typical | 2.55 uV on a 5.1 V span |
| Power | 24 mW at 1 Msps | 24 nJ per conversion |
| Reference | 2.5 V to 5.1 V external | the reference sets the code size directly |
| Interface | SPI compatible, 1.8 V to 5 V | no level shifter on a 3.3 V host |
Two outputs from one conversion is the unusual part
Most high resolution converters give either a fast low latency result or a slow filtered one. This part gives both from the same conversion: the composite code carries a 24-bit differential result plus 7 bits of common mode and an overrange flag with no latency, while the filtered code carries the full resolution after the digital filter. A control loop can run on the composite code while a measurement channel logs the filtered code, and both describe the same sample. The 7-bit common mode field is also what makes a wide common mode range usable, since the host can correct for a common mode shift without a second converter.
Selection notes
- The filter is configurable and synchronisable, so several converters can be started together for a multi-channel measurement.
- The relaxed anti-aliasing requirement comes from the digital filter, and it reduces the number of analog filter stages in front of the part.
- Operation is guaranteed to 85 C in this grade, which is a limit to check against an enclosure that runs warm.
- Because the codes are 32 bit, the host interface and the data path have to carry four bytes per sample, which is a processor load as well as a bus width.
Questions buyers ask
Is 32-bit resolution the same as 32-bit accuracy? No. The linearity is plus or minus 0.5 ppm typical, which is about 21 bits of absolute accuracy, and the noise sets the resolution at a given throughput. The 32-bit word is the container, not the guarantee.
Can it run at 1 Msps and still resolve microvolts? At 1 Msps the noise is 32.2 uV rms, so a microvolt measurement needs the lower throughput and the filter setting that goes with it.
For patient monitoring and instrumentation front ends the converter is quoted with its reference and input amplifier, and the parts we hold for that market are grouped under medical device components. Converter alternates are on the ADC DAC cross reference page.
Request Quote — In Stock, 100% New & Original, Full Warranty