Contact Us

LTC1144IS8#TRPBF

Brand: Analog Devices
Analog Devices LTC1144IS8#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTC1144IS8#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LTC1144IS8#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTC1144IS8#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LTC1144IS8#TRPBF: A Switched Capacitor Inverter Whose 120 Ohm Output Resistance Sets the Load

The LTC1144IS8#TRPBF is a CMOS switched capacitor voltage converter that turns a positive supply of 2 V to 18 V into a negative supply of minus 2 V to minus 18 V. It needs two non-critical external capacitors, one for the charge pump and one for the reservoir. Open circuit voltage conversion efficiency is 99.9 percent typical and power conversion efficiency is 93 percent typical. Maximum output resistance is 120 ohm. The internal oscillator runs at 10 kHz when unloaded, can be slowed with a capacitor, can be overdriven by an external clock, and can be pushed above the audio band by tying the boost pin to the positive supply. The shutdown pin reduces supply current to 8 uA. The body is an 8-lead SO in the industrial grade.

A charge pump is a switch and a capacitor, so its output resistance is set by the switching frequency and the capacitor value rather than by a transistor. That is why the data sheet quotes output resistance instead of a current rating, and why the droop at any load is arithmetic the buyer can do before ordering.

120 ohm is 0.6 V of droop at 5 mA and 2.4 V at 20 mA

At 5 mA the output falls 0.6 V below the ideal negative rail, at 10 mA it falls 1.2 V and at 20 mA it falls 2.4 V. A 15 V input that is asked for minus 15 V delivers minus 14.4 V at 5 mA, minus 13.8 V at 10 mA and minus 12.6 V at 20 mA. An operational amplifier that needs a minus 15 V rail for a plus or minus 15 V output therefore cannot be fed from this converter at more than a few milliamps, and the usual arrangement is one converter per amplifier with a small load, or a converter followed by a linear negative regulator.

The 93 percent power efficiency figure is quoted at a load where the resistive loss is still small against the delivered power. At 20 mA into a 15 V rail the delivered power is 0.3 W and the 2.4 V droop is 48 mW of loss, which is 14 percent, so the efficiency at that point is nearer 80 percent than 93. The data sheet number is a best case, and the droop arithmetic is the honest one at the load a board actually draws.

Ten kilohertz is inside the audio band, and the boost pin is the fix

The free running oscillator is 10 kHz, which is squarely in the audible range. A converter running at 10 kHz puts a 10 kHz ripple on the negative rail, and in an audio circuit that ripple is a tone. The boost pin tied to the positive supply raises the frequency above the audio band, and the cost is a little more switching loss and a slightly different output resistance.

Ripple at the output is the load current divided by the product of frequency and reservoir capacitance. At 10 mA, 10 kHz and 10 uF that is 100 mV; at 4.7 uF it is 213 mV; at 100 uF it is 10 mV. Raising the frequency with the boost pin divides the ripple by the same ratio, which is why a 1 uF capacitor can be enough once the oscillator is above the audio band.

Eight microamps of shutdown is 70 mAh over a year

At 15 V the shutdown current of 8 uA is 120 uW, and over a year it is 70 mAh. In a battery instrument that spends most of its life asleep, the negative rail is the first thing to be switched off, and the shutdown pin is a logic input that a processor can drive directly. The converter also accepts an external clock, so a system that already has a clock can synchronise the pump to it and put the switching products at a known frequency instead of at a free running 10 kHz.

The 18 V maximum input is what separates this part from the 15 V parts in the same market. A 15 V rail at plus 10 percent is 16.5 V, which is inside the rating, while a 15 V rail with a transient that reaches 20 V is not. The 2 V minimum matters at the other end, where a two cell pack at 2.4 V can still run the converter but a single cell cannot.

FunctionSwitched capacitor voltage inverter with shutdown and boost pin
Input range2 V to 18 V, output minus 2 V to minus 18 V
Output resistance120 ohm maximum, 0.6 V droop at 5 mA and 2.4 V at 20 mA
Oscillator10 kHz unloaded, boost pin raises it above the audio band, external clock accepted
Ripple100 mV at 10 mA, 10 kHz, 10 uF; 10 mV at 100 uF
Efficiency99.9 percent open circuit, 93 percent typical at power
Shutdown8 uA, 120 uW at 15 V, 70 mAh over a year
External partsTwo capacitors, charge pump and reservoir
Package8-lead SO, industrial grade, order code IS8 with the lead free finish
LifecycleIn production at the vendor

Two questions buyers ask

Can it replace a 7660 or an LTC1044 in an existing board?
The vendor lists the part as a high voltage upgrade to those devices, and the pin function follows the same arrangement. What changes is the input range, which extends to 18 V, and the boost pin, which the older parts do not have. A board that was qualified at 12 V can move to this part for a 15 V rail, and the capacitors around it stay the same values.

How much current can it deliver at minus 15 V from a 15 V input?
The rating is not a current but a resistance. At 20 mA the droop is 2.4 V, so the rail is minus 12.6 V, which is outside the minus 15 V requirement. To hold minus 14.5 V the load has to stay under about 4 mA. A board that needs 20 mA at minus 15 V uses this converter plus a negative regulator, or a different topology entirely.

Ordering and supply

The IS8 suffix is the industrial SO-8 body and the PBF suffix is the lead free finish. The same family carries commercial and industrial grades, and the PDIP body exists for through hole builds.

We hold this converter for instrumentation and industrial builds. The analog mixed signal ICs page lists the power parts we carry, power management cross reference is where a 7660 or an LTC1044 socket is compared against this part, and where a negative rail is being cost reduced against an isolated module, how to reduce component cost covers what the two capacitors and the parts around them add up to.

Request Quote — In Stock, 100% New & Original, Full Warranty