AD7616BSTZ-RL
Product Specifications
AD7616BSTZ-RL
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7616BSTZ-RL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD7616BSTZ-RL: Sixteen Bipolar Inputs Sampling at One Megasample
The AD7616BSTZ-RL is a 16 channel data acquisition system with two 16 bit converters that sample simultaneously. It takes plus and minus 10 V, plus and minus 5 V and plus and minus 2.5 V inputs directly, with no driver amplifier and no negative supply, which is why it turns up in protective relays, power line monitors and motor control racks. The -RL suffix is the reel packing of the 80-lead LQFP.
What the part is
Each of the two converters has eight multiplexed channels in front of it, so a pair of channels is captured at the same instant and the remaining six pairs follow through the sequencer. Input impedance is 1 Mohm regardless of the sampling rate, an on-chip clamp survives plus or minus 21 V on the analogue pins, and a first order antialiasing filter sits before each converter. The 2.5 V reference and its buffer are internal. Oversampling with the digital filter raises the signal to noise ratio when the full 1 MSPS rate is not needed, and the interface can be parallel or serial with optional CRC checking.
Key parameters
| Parameter | Value |
|---|---|
| Channels | 16, in two simultaneously sampled groups of 8 |
| Resolution | 16 bit per converter |
| Input ranges | plus or minus 10 V, plus or minus 5 V, plus or minus 2.5 V |
| Throughput | 2 x 1 MSPS |
| Signal to noise ratio | 90.5 dB at 1 MSPS, 92 dB at 500 kSPS with oversampling |
| Total harmonic distortion | -103 dB |
| Input impedance | 1 Mohm at any sampling rate |
| Input clamp | plus or minus 21 V |
| Linearity | plus or minus 1 LSB integral, 0.99 LSB differential maximum |
| Supply | 5 V analogue, 2.3 V to 3.6 V digital |
| ESD on analogue inputs | 8 kV |
| Package | 80-lead LQFP |
What the numbers mean on a board
Sixteen channels across two converters at 1 MSPS is 125 kSPS per channel, so the headline rate is a per pair figure and not a per channel figure. 90.5 dB of signal to noise ratio is 14.74 effective bits, which means two of the sixteen bits are gone before any sensor error is counted, and the oversampling mode buys only 1.5 dB more at twice the capture time. One code on a 5 V span is 76.3 uV. The 1 Mohm input impedance and the 21 V clamp are the two features that remove parts from the surrounding bill of materials, since neither a driver amplifier nor a bipolar supply is needed.
Where it is used
- Protective relays and power line monitoring
- Multiphase motor control current and voltage sensing
- Industrial instrumentation and control racks
- General purpose data acquisition systems
Board habits that decide whether the sixteenth bit means anything
The converter samples two channels at once, so the two input groups have to reach the package on equal footing or the pair carries a skew that no amount of averaging removes. Keep both groups short, keep them away from the digital lines that run to the parallel port, and return the analogue ground under the package rather than through the digital plane. The clamp is rated to plus or minus 21 V, which is protection and not a licence to run 24 V signals into the part without a series resistor. Finally, the reference is internal, so the decoupling on the reference pin is part of the converter, and a capacitor value chosen for a different part in the family is not automatically correct.
Sourcing notes and next step
The BSTZ code is the 80-lead LQFP and the RL suffix is reel packing, so a tape and reel request and a tray request are not the same line item. Converter families with comparable channel counts are compared on the ADC and DAC cross reference page. Because the part replaces a driver amplifier, a bipolar supply and an external reference in one move, boards that cannot get those three parts are often better served by switching to this device, and the route for that is BOM shortage recovery. The wider catalogue sits on the analog and mixed signal family page. Send quantity and target date and we confirm stock, date code and reel status.
Request Quote — In Stock, 100% New & Original, Full Warranty