Contact Us

AD707ARZ

Brand: Analog Devices
Analog Devices AD707ARZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD707ARZ — Analog & Mixed-Signal ICs | Superb Automation

AD707ARZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD707ARZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD707ARZ: 15 Microvolts of Offset and 0.1 Microvolt per Degree of Drift

The AD707ARZ is an ultralow drift operational amplifier whose published limits are 15 microvolts maximum input offset, 0.1 microvolts per degree Celsius maximum offset drift, 0.35 microvolts peak to peak maximum noise over 0.1 Hz to 10 Hz, 1 nA maximum input bias current, 130 dB minimum common mode rejection and 120 dB minimum supply rejection. Open loop gain is quoted at 8 volts per microvolt minimum, which is 138 dB, so the amplifier holds its closed loop accuracy even at high gain. Slew rate is 0.3 volts per microsecond and closed loop bandwidth is 0.9 MHz, which places it firmly in the precision band rather than the fast band. A dual version is available as the AD708, and the single is offered in TO-99, DIP, cerdip and surface mount bodies.

Published values

ParameterValue
Input offset15 microvolts maximum
Offset drift0.1 microvolts per degree Celsius maximum
Low frequency noise0.35 microvolts peak to peak maximum, 0.1 Hz to 10 Hz
Open loop gain8 volts per microvolt minimum, about 138 dB
Common mode rejection130 dB minimum
Supply rejection120 dB minimum
Input bias current1 nA maximum
Slew rate0.3 volts per microsecond
Closed loop bandwidth0.9 MHz
Dual versionAD708
BodiesTO-99, DIP, cerdip and surface mount

Drift, not offset, is the specification that decides the grade of an instrument

A 15 microvolt offset can be trimmed out at production test and stays out if the amplifier does not move. The 0.1 microvolt per degree figure is what makes that trim last: over a 50 degree excursion the offset moves 5 microvolts, which is a third of the untrimmed limit and inside the resolution of most 16 bit systems. Compare that with a general purpose precision amplifier at 1 microvolt per degree, where the same excursion moves 50 microvolts and forces either a wider calibration window or a chopper. This is why the part appears in transducer amplifiers, precision references and instrument front ends that are calibrated once at the factory.

The cost of specifying this part by mistake

An ultralow drift amplifier with a 0.3 volt per microsecond slew rate is a poor choice for a signal that moves quickly: a 10 V step takes 33 microseconds to settle, and a 100 kHz signal is heavily distorted. Programs that specify it because the offset figure looks good, and then ask for 1 MHz of bandwidth, end up adding a second amplifier and a coupling network. The sensible split is a precision part for the dc path and a faster part for the ac path, and the AD707 belongs strictly in the first.

Bodies, grades and the TO-99 question

The package list includes a metal can, which is still ordered for instruments that are rebuilt rather than replaced, and the surface mount body is the volume option. Where the exact grade is unavailable, the drift figure is the one that has to be matched, not the offset: a substitution that doubles the drift undoes the calibration strategy even if the room temperature offset is better. The amplifier cross reference lists the precision op amp families we can supply, the ADI second source page covers grade equivalence, and the obsolete part cross reference hub covers codes that have reached end of life.