Contact Us

AD587KRZ

Brand: Analog Devices
Analog Devices AD587KRZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD587KRZ — Analog & Mixed-Signal ICs | Superb Automation

AD587KRZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD587KRZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD587KRZ: 10.000 V From a Buried Zener, and the 13.5 V Input Floor

The AD587KRZ is the K grade of a 10 V buried Zener reference in the surface mount body, and the K column is the one to read first: the initial output sits between 9.995 V and 10.005 V, so the part is inside 5 mV before any trim is applied. Behind that number sits a buried Zener rather than a band gap, which is why the low frequency noise is quoted in the region of 100 nV per root hertz and why there is a dedicated noise reduction pin. The part draws 4 mA maximum, which rules it out of loop powered work but keeps it comfortable on a converter board. The one specification that catches people is the input floor: the data sheet gives 13.5 V as the minimum supply, so a system running a 12 V rail cannot feed it directly even though the output is only 10 V.

Published values

ParameterValue
Output voltage10.000 V nominal
K grade initial error9.995 V to 10.005 V, plus or minus 5 mV
J grade initial error9.990 V to 10.010 V, plus or minus 10 mV
Reference typeBuried Zener, laser trimmed thin film resistors
Supply range13.5 V minimum to 36 V maximum
Quiescent current4 mA maximum
NoiseAbout 100 nV per root hertz from the Zener, reducible at the noise pin
TrimOutput trim pin, external potentiometer
BodySurface mount R suffix, also sold in DIP and TO-99 forms
Grade optionsJ, K, U, plus MIL-STD-883 compliant versions

Why 13.5 V is the number that decides the rail

A 10 V reference needs headroom for the Zener plus the buffer, and the vendor publishes 13.5 V as the drop out point. On a 15 V rail there are 1.5 V of margin, which is enough but leaves no room for a 5 percent rail tolerance unless the upstream regulator is trimmed. On a 12 V rail the part simply does not regulate, and the failure looks like a low output rather than a dead part, so it can pass incoming test and fail in the field. Two practical answers exist: run the reference from the pre regulator node at 15 V or 18 V, or move to the AD780 or another reference that works from 5 V and accept a different drift budget. The second option changes the converter calibration, so it is usually cheaper to keep the 15 V node and add a small local filter.

Noise pin, trim pin and the two internal test pins

The noise reduction pin takes a capacitor to ground and the data sheet describes the resulting reduction in the low frequency region; the exact capacitor value is tied to the settling time you can tolerate at power up, because a larger capacitor slows the reference as it charges. The trim pin moves the output by a small amount around 10.000 V and exists to remove board level error, not to correct a wrong grade. The pins marked as internal test points are exactly that: the data sheet states that no connection should be made to them. A board that routes a trace to one of those pins will inject noise into the Zener bias, and the symptom is drift that no amount of filtering fixes.

Buying a 10 V reference that is still current

The AD587 is an old part that remains in production, which puts it in the awkward middle: not obsolete, but not the part a distributor stocks deeply. When a BOM calls for the K grade and the open market only shows J, the difference is 5 mV of initial error and a wider trim window, and both can be absorbed if the calibration step covers them. What cannot be absorbed is a different body, because the R suffix is not the same footprint as the N suffix, so a substitution across bodies needs a board change. The ADI part second source page lists the reference families we hold and the grades that are genuinely equivalent, and the obsolete part cross reference hub covers the case where the exact grade has stopped. For a build that needs the part this quarter rather than next, the lead time page shows what is on the shelf.