Contact Us

AD5722RBREZ

Brand: Analog Devices
Analog Devices AD5722RBREZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD5722RBREZ — Analog & Mixed-Signal ICs | Superb Automation

AD5722RBREZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD5722RBREZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD5722R: Two 12-Bit Channels That Reach Plus or Minus 10.8 V From One 5 V Rail

The AD5722R is a dual, 12-bit, serial input, voltage output converter whose full-scale range is set in software from six options: 5 V, 10 V, 10.8 V, plus or minus 5 V, plus or minus 10 V and plus or minus 10.8 V. It runs from a single supply of 4.5 V to 16.5 V or from a dual supply of plus or minus 4.5 V to plus or minus 16.5 V, and it carries an internal reference with a 5 ppm per degree C maximum drift plus the reference buffers needed to drive the output stages. Integral nonlinearity is plus or minus 16 LSB maximum, differential nonlinearity plus or minus 1 LSB, total unadjusted error 0.1 percent of full scale, and settling to 10 microseconds typical.

The range is a register, not a resistor

Most industrial control loops are specified in plus or minus 10 V, and the board around them usually runs on 3.3 V or 5 V logic. Getting a bipolar output from a single low voltage rail normally means an external amplifier, a negative rail generated on board and a resistor network whose ratio sets the span. Here the span is a register write, the bipolar output comes from the internal amplifiers, and the negative rail is the AVSS pin, which is where the supply arrangement has to be read carefully: the part generates the swing, not the rail. On a single positive supply the outputs stay positive, and the bipolar ranges require a negative supply at AVSS. A board that asks for plus or minus 10 V from a single 12 V rail will get a clipped output and no error flag.

Values a buyer checks first

ParameterValueNote
Channels, resolution2 channels, 12 bitsAD5732R is 14 bits, AD5752R is 16 bits, same pinout
Output ranges5 V, 10 V, 10.8 V, plus or minus 5, 10, 10.8 VSelected by register write, not by strapping
Integral nonlinearityPlus or minus 16 LSB maximumDNL plus or minus 1 LSB, guaranteed monotonic
Total unadjusted error0.1 percent of full scale maximumIncludes reference, gain and offset
Settling time10 microseconds typicalTo within a fraction of an LSB at 12 bits
Internal reference2.5 V, 5 ppm per degree C maximumBuffered, brought out and can be overdriven
Supplies4.5 V to 16.5 V single, plus or minus 4.5 V to plus or minus 16.5 V dualBipolar ranges need AVSS below ground
InterfaceSerial, clock up to 30 MHzDaisy chain and readback available
Package, temperature24-lead TSSOP, minus 40 C to plus 85 CLDAC for simultaneous update, CLR to zero or midscale

LDAC and CLR are the two pins that decide system behaviour

LDAC updates the outputs together, so a two axis loop can compute both new set points and apply them in the same instant rather than 10 microseconds apart, which matters when the two channels drive an X and Y pair and a skewed update shows up as a transient in the middle of the movement. CLR forces both outputs to a level chosen by a pin, zero scale or midscale, and that choice is a safety decision: midscale is the safe state for a servo loop whose amplifier expects a centred command at power up, and zero scale is the safe state for a stage whose output drives a switch. The BIN/2sComp pin picks two's complement or offset binary coding for the bipolar ranges, so the same hardware supports a processor that produces signed integers and one that produces offset codes.

Industrial loops, test equipment and the settling budget

Closed loop servo control, process control, PLC analogue output cards and automotive test equipment are the four applications the part is specified for, and they share a structure: a digital set point, a loop that closes around the controlled quantity, and an accuracy requirement that sits well below the loop resolution. In that structure a 12-bit converter with a 0.1 percent total unadjusted error is usually enough, because the loop trims the error out over time, and what matters more is settling, since a slow output delays every set point change. In a calibrator or a source meter the loop is not there to help, the converter output is the delivered quantity, and the 14 or 16-bit members of the family in the same package are the right choice rather than a second calibration step.

Procurement and second source

The family is pin compatible across resolution, so the sourcing problem is usually a specific grade rather than the part. The ADC DAC cross reference covers the converters that share the interface and the ranges, the how to verify a drop in replacement page sets out the checks that catch a range or coding mismatch before a board goes to production, and component lead time solutions covers the 24-lead TSSOP when the distributor date is long.