Contact Us

AD5668BRUZ-2REEL7

Brand: Analog Devices
Analog Devices AD5668BRUZ-2REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD5668BRUZ-2REEL7 — Analog & Mixed-Signal ICs | Superb Automation

AD5668BRUZ-2REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD5668BRUZ-2REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD5668BRUZ-2REEL7: Eight 16-Bit Channels, 76 uV per Step, One Reference

The AD5668BRUZ-2REEL7 is an octal, 16-bit, buffered voltage output converter. In the -2 variant the on-chip reference is 2.5 V at 5 ppm per degree C, and the internal gain of two gives a 5 V full scale output. The supply range is 2.7 V to 5.5 V, the part is guaranteed monotonic, power-on reset brings the outputs to zero scale, the LDAC pin updates all eight channels together, the CLR pin drives them to a programmable code, and power-down takes the current to 400 nA at 5 V. The interface is a 3-wire SPI port clocked to 50 MHz, the body is a 16-lead TSSOP in the BRUZ suffix, and the same die is offered in a 4 mm by 4 mm LFCSP and a 16-ball WLCSP.

The -2 suffix doubles the span and so doubles the step

Sixteen bits over 5 V is 76.3 uV per step. Over 2.5 V, which is the -1 variant, the same converter gives 38.1 uV per step. Both are 16-bit parts with 65536 codes; the difference is the reference voltage behind them. A buyer who specifies 16 bits and then specifies a 2.5 V span is choosing the finer step, while a buyer who needs the 5 V swing is choosing the coarser one. Neither choice is wrong, but the resolution requirement and the span requirement have to be written together.

Reference drift over temperature, counted in LSB

At 5 ppm per degree C, a 50 degree excursion moves the reference by 250 ppm, which is 1.25 mV on 5 V and 16.4 LSB of the 16-bit span. Over the full 145 degree industrial excursion it is 725 ppm, 3.63 mV and 47.5 LSB. This is the reason a 16-bit converter is usually judged on its reference: the converter contributes a fraction of an LSB of drift, and the reference contributes tens of LSB. The internal reference is good enough for a 12-bit requirement and marginal for an uncompensated 16-bit one.

LDAC is what makes eight channels one event

A 32-bit frame at 50 MHz takes 640 ns, so writing all eight channels takes 5.12 us. The outputs do not move as each register is written: they move when LDAC is asserted, all at once. In a phase shifter or a multi-channel bias supply the difference between 5.12 us of skew and zero skew is the difference between a usable array and a calibration problem. The CLR pin provides the opposite function, driving all eight outputs to zero, midscale or full scale for a known state at start-up.

The published table, as the vendor states it

ParameterValue
Resolution and channels16 bit, 8 channels
Reference in the -2 variant2.5 V on chip, 5 ppm per degree C, gain of 2
Full scale output5 V
Monotonicityguaranteed monotonic
Power-on resetzero scale in the -2 variant
Power-down current400 nA at 5 V
InterfaceSPI to 50 MHz
UpdateLDAC for all channels together, CLR to a programmable code
Supply2.7 V to 5.5 V
Package16-lead TSSOP, LFCSP or WLCSP

Sixteen bits of setting across eight channels

Eight channels at 16 bits is 128 bits of setting in one package, with one reference and one SPI port. In a bias network that replaces eight single channel converters, eight decoupling networks and eight chip selects. The saving is not only board area: eight references would each drift in their own direction, while one reference moves all eight channels together, which preserves the ratios between channels even as the absolute value drifts.

Buyer questions

Is the internal reference on at power-up? No, and this is the opposite of the single channel members of the nanoDAC family. The reference is off at power-up so that an external reference can be used, and it is enabled by a software write. A board that expects an output at power-up without that write will sit at zero scale.

What happens to the outputs at power-up? In the -2 variant the power-on reset circuit brings every output to zero scale and holds it there until a valid write arrives. The -3 variant resets to midscale. Which one a system wants depends on whether the load prefers a defined off state or a defined centre point.

Family page for the category: Analog and mixed-signal ICs. For converter cross references see ADC and DAC cross reference, and for shortage recovery on a running build see BOM shortage recovery.

AD5668BRUZ-2REEL7 bus budget: 32 bits a channel, 5.12 us for eight, and the 195 kHz that the serial port allows

Each channel takes a 32 bit write, so eight channels is 256 bits. At the 50 MHz clock rate the port supports, one frame is 0.64 us and the eight channel sequence is 5.12 us, which caps a sequential update at 195 kHz. At 25 MHz the sequence is 10.24 us and the ceiling falls to 97.7 kHz, and at 10 MHz it is 25.6 us and 39.1 kHz. The LDAC pin changes that picture: with all eight channels loaded and then latched together, the update is one pulse wide and the skew between channels is set by the pin rather than by the bus, so a waveform generator that needs eight phases to move at the same instant is limited by the 5.12 us of loading and not by the output timing.

What the reference load looks like with eight channels

Eight output amplifiers all draw their current from the same internal reference, and the reference has to hold its value while the codes change. The -2 variant puts 2.5 V at 5 ppm per degree C on chip with a gain of two, giving a 5 V full scale, so the reference is doing double duty as the span and as the accuracy. Over 100 C the 5 ppm coefficient is 500 ppm, or 1.25 mV at the reference and 2.5 mV at the output, which on the 5 V span is 32 codes of a 16 bit converter. A system that needs better than 32 codes over temperature needs an external reference, and the part accepts one.

Power down at 400 nA and what it is worth

In power down the part draws 400 nA at 5 V, which is 2 uW and 3.5 mAh over a year. For a battery instrument that holds a calibration offset across a long standby, that is the difference between a cell that lasts and one that does not, and the power on reset to zero scale is what makes the wake up deterministic. A system that needs the outputs to hold their last value through a power cycle has to keep the part powered, because the reset drives them to zero and the host has to rewrite all eight channels before the loop closes.

Serial clockOne 32 bit channelEight channels loadedSequential update ceilingWith LDAC, skew between channels
50 MHz0.64 us5.12 us195 kHzone LDAC pulse
25 MHz1.28 us10.24 us97.7 kHzone LDAC pulse
10 MHz3.20 us25.6 us39.1 kHzone LDAC pulse

Converter equivalents are on ADC DAC cross reference, consolidated ordering for a multi channel analog output card is on one stop BOM sourcing, and programme purchasing is on OEM procurement.

Request Quote — In Stock, 100% New & Original, Full Warranty