Contact Us

AD5620CRMZ-2REEL7

Brand: Analog Devices
Analog Devices AD5620CRMZ-2REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD5620CRMZ-2REEL7 — Analog & Mixed-Signal ICs | Superb Automation

AD5620CRMZ-2REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD5620CRMZ-2REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD5620CRMZ-2REEL7: 12 Bits, a 2.5 V Reference and a 5 V Full Scale

The AD5620CRMZ-2REEL7 is a single channel 12-bit voltage output digital to analog converter from the nanoDAC family of Analog Devices in an 8-lead MSOP. The suffix decides the reference: the -1 parts carry a 1.25 V reference for a 2.5 V full scale and the -2 and -3 parts carry a 2.5 V reference for a 5 V full scale, with 5 ppm per degree C of drift on chip and the reference available at the VREFOUT pin. The output amplifier swings rail to rail, its inverting input is brought out for remote sensing, settling time is 10 microseconds, the three-wire serial interface runs to 30 MHz and is compatible with SPI, QSPI, MICROWIRE and DSP ports, and the part draws 2.5 mW at 5 V with a power-down mode at 480 nA. Outputs are guaranteed monotonic, and the power-on reset brings the output to 0 V on the -1 and -2 parts and to midscale on the -3 part.

The suffix sets the full scale, not the resolution

All three members are 12-bit, and the difference is the reference and therefore the LSB. On a 5 V full scale one LSB is 1.221 mV, on 2.5 V it is 0.61 mV. A control loop that needs 1 mV of resolution on a 5 V actuator range needs the -2 part, and one that works around a 2.5 V setpoint is better served by the -1 because its LSB is half the size and the noise is lower in absolute terms. Ordering by resolution alone loses the half of the specification that decides the smallest step the loop can make.

Five ppm per degree C is one LSB over 100 C

Five ppm per degree C over a 100 C rise is 500 ppm, which on a 2.5 V reference is 1.25 mV, and at a 5 V full scale that is 1.02 LSB. So the reference drift alone moves the output by a bit over the industrial range, before the converter's own gain and offset errors are counted. That is a good figure for an on-chip reference and it is still the dominant dc error in the part, which is why a ratiometric arrangement, where the same reference feeds the sensor excitation, removes it from the budget entirely. A system that needs better than one bit of absolute drift over temperature has to calibrate or to use an external reference with a tighter specification.

Ten microseconds of settling against a 0.8 microsecond frame

The interface can shift a 24-bit frame in 0.8 microseconds at 30 MHz, so the bus is not the limit on the update rate: the 10 microseconds of settling is, which caps the update at about 100 thousand writes per second. Very few control loops need more, and the ones that do are usually servoing a current rather than a voltage. The 2.5 mW at 5 V is 0.5 mA, so the part is not a battery problem while it is running; the 480 nA power-down is, because it is what allows the output to be parked at a known level with the rail alive. Over a year that is 4.2 mAh, which is small against a coin cell but not zero.

ParameterPublished valueWhat it decides
Resolution12 bits, guaranteed monotonic1.221 mV per LSB at 5 V full scale
Reference2.5 V on chip on the -2 part, 5 ppm per degree C1.02 LSB of drift over 100 C
Full scale5 V on the -2, 2.5 V on the -1Half the LSB size on the -1
Settling10 microsecondsAbout 100 thousand updates per second
Interface30 MHz, SPI, QSPI, MICROWIRE, DSP24-bit frame in 0.8 microseconds
Power2.5 mW at 5 V, 480 nA in power-down0.5 mA running, 4.2 mAh a year parked
Power-on reset0 V on -1 and -2, midscale on -3Decides the state before the first write
Package8-lead MSOP or SOT-23Same die in two footprints

Does the -2 part need an external reference?

No. The 2.5 V reference is on chip with 5 ppm per degree C and is brought out at the VREFOUT pin, so the full scale is set by the order code rather than by a second part. A system that needs a different range uses the 1.25 V version instead of dividing an external reference, and a system that needs tighter drift than 5 ppm uses a different family entirely rather than fighting this one. The reference being on chip is also what keeps the footprint at eight leads, which for a trim or bias circuit on a dense board is often the deciding factor.

What does the power-on state cost?

On the -2 part the output comes up at 0 V and stays there until a valid write arrives, so a bias that has to start at zero is safe and a bias that has to start at midscale is not: that case needs the -3 part, whose reset value is midscale. Getting this wrong means the output sits at the wrong end of its range for the whole time between power-up and the first command, which in a laser bias or a varactor supply can be the difference between a safe start and a stress event. The converter range is on the ADC and DAC cross reference, the package and pinout comparison across the family is on the pin to pin cross reference, and the complete index is the analog and mixed-signal index.

Request Quote — In Stock, 100% New & Original, Full Warranty