AD5318BRUZ
Product Specifications
AD5318BRUZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD5318BRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD5318BRUZ: Eight 10-Bit DACs That Share Two Reference Pins, Which Is the Real Selection Question
The AD5318BRUZ is one order code inside a three part family: the AD5308 is eight 8-bit DACs, the AD5318 is eight 10-bit DACs and the AD5328 is eight 12-bit DACs, and all three are pin compatible in a 16-lead TSSOP with the same 2.5 V to 5.5 V single supply. The BRUZ suffix is the B linearity grade of the 10-bit member, so the number that matters on a drawing is plus or minus 3 LSB of integral nonlinearity rather than the plus or minus 4 LSB of the A grade. Because the family keeps one pinout, the resolution decision can be deferred to the last build phase, and a purchase that lands the 8-bit or the 12-bit body still fits the same land pattern.
Eight channels, two reference inputs, four channels per reference
The eight outputs do not have eight references. Each reference pin serves one quad of four DACs, and each of the two pins can be configured as a buffered input, an unbuffered input, or the supply rail itself. That arrangement decides most of the application fit: a system that needs one common full scale is served by a single external reference fanned to both pins, while a system that needs two different full scales, for example 0 V to 2.5 V on one quad and 0 V to 4.096 V on the other, needs two references and gets no cross interference between quads. What it cannot do is give eight independent full scales. Each channel also selects either a gain of 1 or a gain of 2, so the output range is 0 V to VREF or 0 V to 2 VREF, and with a 2.5 V reference and gain of 2 the full scale is 5 V, which needs a supply above 5 V to reach the top code.
What one LSB is worth at 10 bits, and where the B grade lands
At 10 bits there are 1024 codes. With a 2.5 V reference the code step is 2.44 mV, and with a 4.096 V reference it is 4.0 mV. The B grade limit of plus or minus 3 LSB is therefore plus or minus 7.3 mV at 2.5 V, which is 0.29 percent of full scale, and the A grade limit of plus or minus 4 LSB is plus or minus 9.8 mV. For a gain trim that only has to land inside a one percent window, both grades pass. For a 12-bit system that borrows this part as a coarse offset source, the 0.29 percent error is already larger than one 12-bit LSB of the following stage, so the trim range has to be planned around it rather than against it. If 10 bits is not enough, the same socket takes the 12-bit AD5328, where the step at 2.5 V is 610 uV.
| Parameter | Value on this order code | What it decides |
|---|---|---|
| Resolution | 10 bits, 1024 codes | 2.44 mV per code with a 2.5 V reference |
| Integral nonlinearity | Plus or minus 3 LSB, B grade | 7.3 mV, 0.29 percent of full scale |
| Supply | 2.5 V to 5.5 V single | 3.3 V and 5 V systems from one order code |
| Reference inputs | Two pins, one per quad of four channels | Two full scales maximum across eight outputs |
| Output range | 0 V to VREF or 0 V to 2 VREF | 5 V full scale needs a rail above 5 V |
| Output amplifier slew | 0.7 V per microsecond | A 2.5 V step takes about 3.6 microseconds |
| Supply current | 0.7 mA typical at 3 V | 2.1 mW total, about 262 uA per channel |
| Power-down | 120 nA at 3 V, 400 nA at 5 V | Per channel shutdown, so unused quads can sleep |
| Serial clock | 30 MHz, three wire | All eight channels reload inside one millisecond |
| Temperature | Minus 40 C to plus 125 C | Automotive qualified grades exist in the family |
Update timing, power-down and the power-on state
Every channel is double buffered, so a new code is written into a holding register and only reaches the output amplifier when the LDAC input is pulled low. That is what makes simultaneous update possible: eight writes over the 30 MHz serial port, then one LDAC edge, and all eight outputs move within the same few microseconds instead of stepping one after another. A power-on reset circuit holds every output at 0 V until the first valid write arrives, which matters in a system where the DAC drives a setpoint that must start at zero. Power-down is per channel and takes the whole device to 120 nA at 3 V, so leaving four of the eight channels off is a real saving rather than a token one.
The output amplifier is rail to rail and rated to swing to the supply rails, but the 0.7 V per microsecond slew rate sets a practical limit on large steps. A 2.5 V step takes about 3.6 microseconds, so a loop that updates a setpoint every 10 microseconds and expects the output to have arrived has to account for the slew time as part of the settling budget, not just the DAC update time on the serial bus.
Where this part earns its place, and where it does not
Digital gain and offset adjustment, programmable attenuators, programmable current and voltage sources and optical networking bias control are the classic uses: all of them want several slowly changing levels, none of them needs 16 bits, and all of them benefit from having the level defined at power-up rather than floating. The part is a poor fit for anything that needs per channel independent full scale, for anything that needs a monitored output, and for anything where the DAC must hold its last code through a supply glitch, since the power-on reset returns to 0 V.
For a build that mixes this family with other converter order codes, the ADC and DAC cross reference lists the pinout and resolution pairs that share a socket. Where a second source or an alternative grade is needed for a production BOM, the ADI part second source page covers what to compare before a substitution is signed off, and the pin to pin cross reference page sets out the fields that have to match beyond the package outline.