AD2S1205WSTZ
Product Specifications
AD2S1205WSTZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD2S1205WSTZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD2S1205WSTZ: the 12-bit resolver converter with the automotive W grade
The AD2S1205WSTZ is a 12-bit resolver to digital converter in a 44-lead LQFP, W grade. The family publishes a 1250 revolution per second maximum tracking rate, 11 arc minutes of accuracy on the Y grade and 22 arc minutes on the W grade, a single 5 volt supply with 5 percent tolerance, and an incremental encoder emulation output of 1024 pulses per revolution. The W suffix is the automotive grade, which is the reason this code shows up in traction and steering rather than in industrial drives.
Published values
| Parameter | Value |
|---|---|
| Resolution | 12 bit |
| Angular accuracy, W grade | 22 arc minutes |
| Angular accuracy, Y grade | 11 arc minutes |
| Maximum tracking rate | 1250 rps at 12 bit |
| Input signal range | 3.15 V peak to peak, plus or minus 27 percent |
| Supply | 5.00 V, plus or minus 5 percent, single supply |
| Package | 44-lead LQFP (ST-44-1) |
| Temperature range | -40 C to +125 C |
| Encoder emulation | 1024 pulses per revolution |
| On board oscillator | programmable sinusoidal excitation |
| Fault detection | system fault detection |
22 arc minutes against a 5.27 arc minute code
At 12 bit the least significant bit of a full revolution is 5.27 arc minutes, and the W grade publishes 22 arc minutes of accuracy, which is 4.17 least significant bits. The converter therefore resolves finer than it is accurate, and a customer who reads the 12 bit resolution as a position specification will be quoting four times the real accuracy.
The Y grade of the same part publishes 11 arc minutes, exactly half the W grade error, and it is the grade to use when the application is industrial and the automotive qualification is not required. The two grades share the package and the pinout, so the choice is a purchase decision rather than a circuit change.
1250 revolutions per second is 800 microseconds per revolution
At the published maximum tracking rate one mechanical revolution takes 800 microseconds, which is fast enough that the excitation frequency and the loop bandwidth set the practical limit long before the digital tracking rate does. A resolver excited at 10 kilohertz has a period of 100 microseconds, so the tracking loop sees eight excitation cycles per revolution at the maximum rate, and the demodulator needs more than that to settle.
In practice the usable maximum rate is set by the resolver's own bandwidth and by the mechanical resonance of the mounting. The 1250 figure is the converter's ceiling, not the system's.
The 1024 pulse encoder output is a compatibility feature
Incremental encoder emulation at 1024 pulses per revolution gives 0.3516 degrees, or 21.09 arc minutes, per pulse. A controller that was built around an incremental encoder can therefore be driven from a resolver without a change to its position input, and the resolver brings absolute position on power up, which the encoder could not.
The emulation is coarser than the converter's own resolution: 4096 codes per revolution from the 12 bit output against 1024 pulses from the emulation. A loop that needs the full resolution has to read the parallel or serial port, not the emulated encoder output.
Buyers usually arrive at the ADI second source page to find the family alternatives, then use how to verify a drop in replacement to confirm a substitute before it is fitted; the pin to pin cross reference is the routine for a part that has already stopped shipping.
Two questions buyers ask
What does the W grade add over the Y grade? The W suffix is the automotive grade and it carries a looser published accuracy of 22 arc minutes against 11 on the Y grade. Where automotive qualification is not required, the Y grade is the more accurate part.
Can the emulated encoder output replace a 1024 line encoder? For a controller that only needs incremental pulses, yes, and it adds absolute position at power up. The emulation is 1024 pulses per revolution, which is coarser than the 12 bit port output.