Contact Us

AD2427WCCSZ-RL

Brand: Analog Devices
Analog Devices AD2427WCCSZ-RL is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD2427WCCSZ-RL — Analog & Mixed-Signal ICs | Superb Automation

AD2427WCCSZ-RL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD2427WCCSZ-RL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD2427WCCSZ-RL: an A2B bus node that carries four PDM microphones but cannot be the master

What this order code is

AD2427WCCSZ-RL is the slave only member of the Automotive Audio Bus transceiver family, with both A and B transceiver blocks and a 15 m node to node cable rating. It receives and forwards the bus, and it brings up to four PDM digital microphones onto that bus, which is the one audio input it has. The family table is explicit on the point that matters here: the AD2427 has no I2S or TDM support at all, so it cannot hand audio to a local codec, a DSP or an amplifier over a multichannel digital audio port. Its job is to be a microphone node on an existing bus, not to be a source of audio for other chips.

The RL suffix is the reel option and the W marks the automotive qualified version. The part is not a de-featured AD2428 that can be promoted later: master capability is a block that the die either has or does not have, so a node built around the AD2427 cannot be turned into the head of a chain by a firmware change. That is the single most expensive confusion in this family and it usually surfaces at the first prototype build.

Parameters as published

ItemValue
Bus roleslave only, cannot be master
Slaves discoverablenot applicable
Transceiver blocksA and B
Cable length, node to node15 m
Cable length, overall40 m for the bus
Audio interfacenone, no I2S or TDM support
Microphone interfacePDM, up to 4 microphones
Control channelI2C to I2C over distance, GPIO and interrupt
Bus poweringbus powered or locally powered
QualificationAEC-Q100
ConfigurationSigmaStudio graphical tool
Statusin production

Numbers that decide the application

Four PDM microphones is the whole audio budget of this part. A PDM microphone running at a 3.072 MHz clock delivers 48 kHz of audio at a 64 times oversampling ratio, so four microphones is four bit streams that have to be read and packed into the bus frame. If the application needs eight microphones at one position, this part cannot do it and two nodes are needed, which costs another 15 m of cable and another connector pair rather than another chip.

The A and B blocks are what make the node useful in the middle of a chain rather than only at the end. A mid bus node terminates and re-drives both directions, so the 40 m overall limit is reached through hops of at most 15 m rather than through one long run. A chain of three 13 m hops is 39 m and inside the limit, while four hops of 13 m is 52 m and outside it even though every individual hop is legal. The cable delay is about 5 ns per metre, so the 15 m hop adds 75 ns of one way latency and the full 40 m adds 200 ns, which is roughly 1 percent of the 20.8 microsecond frame at 48 kHz.

Because the part has no I2S port, the only way audio leaves the node is the bus itself. That removes the option of a local analog or digital fallback and it also removes the clock domain question: the node does not need an audio master clock of its own, it uses the bus clock and framing supplied by the master. On a microphone node this is an advantage, because there is nothing to synchronise and nothing to configure as a clock master.

Where it fits and where it does not

It fits microphone nodes, overhead and headliner arrays, beamforming and hands free pickups, and any position where PDM microphones have to join an A2B chain without a local codec. It does not fit the master position, a node that has to feed a local DSP or amplifier over I2S, or an application that needs more than four microphones at one point. A line that starts from this code and later asks for a local audio output has to change the part, not the settings.

Supply and second source questions

The questions we get on this code are about whether the node can be promoted to master, how many microphones it can take, and which family member has the I2S port. The honest answer to the first is no, and the second question is answered by the family table rather than by the package. The members that share the transceiver blocks and the ones that add the audio port are separated on the ADI part second source page.

Sourcing notes and next step

We quote this code against the bill of materials and check role, blocks, microphone count and grade, because a footprint match inside this family says nothing about capability. Where the exact code is short we will say so rather than ship the nearest family member and leave the bus unable to enumerate. Send the line items, quantities and required date through the BOM shortage recovery page, and if the platform is a long life automotive one, the route for parts that are still in production but no longer recommended for new builds is the obsolete part cross reference hub. The family list sits on the analog and mixed signal IC page.

Request Quote — In Stock, 100% New & Original, Full Warranty