TPS73625MDBVREP
Product Specifications
TPS73625MDBVREP
Texas Instruments — Power Management & Signal Chain
Product Overview
The TPS73625MDBVREP from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TPS73625MDBVREP 2.5 V, 400 mA regulator with reverse current blocking
The TPS73625MDBVREP is the 2.5 V fixed member of the TPS736 family ordered as an enhanced product, in the five pin SOT-23 body. The silicon is the same NMOS follower regulator that the rest of the family uses: 1.7 V to 5.5 V input, 400 mA output, no output capacitor needed for stability, and a pass device that blocks current from flowing back from the output to the input. The enhanced product route adds a controlled baseline and a qualification document on top of the catalogue part, which is what a defence or medical programme buys when it needs a paper trail for a part that is otherwise catalogue stock.
One thing has to be said before the numbers. The document we hold for this family is the standard TPS736 data sheet, and the enhanced product addendum for this exact string is not published under either vendor host we can reach. The electrical content below is therefore the standard silicon content, and the qualification claims for the EP variant have to come from the EP addendum and the certificate of conformance that ships with the lot, not from this page. A buyer who needs the EP document for a programme should ask for it by name with the order.
Key parameters from the SBVS038X document, standard silicon
| Input range | 1.7 V to 5.5 V, minimum also limited by output plus dropout |
| Output | 2.5 V fixed, adjustable member uses a 1.204 V reference |
| Current | 400 mA continuous, foldback current limit |
| Accuracy | 0.5 percent initial, 1 percent over load, line and temperature |
| Dropout | 75 mV typical, 200 mV maximum at 400 mA |
| Output capacitor | None required, stable with any value or type of capacitor |
| Noise | 30 microvolt RMS with a 0.1 microfarad noise reduction capacitor on the NR pin |
| Ground current | 400 microamp typical, 550 microamp maximum on the legacy chip and 630 on the current chip |
| Reverse current | Blocked by the follower topology, 0.1 microamp typical and 10 microamp maximum leakage with the enable low |
| Current limit | 400 to 650 mA on the legacy chip, 500 to 800 mA on the current chip, 450 mA short circuit |
| Package | DBV five pin SOT-23 in the enhanced product string, 2.9 mm by 2.8 mm |
| Order code | The plain TPS73625DBVR and TPS73625DBVT rows are Active; the EP string is ordered against its own addendum |
The addendum for this voltage is not clean
In the standard addendum the rows for this voltage read against bodies that do not match their letters. TPS73625DBVR is printed against an eight pin SON, TPS73625DBVT against the five pin SOT-23, and TPS73625DCQ against the SOT-23 with the status Obsolete. The DBV letter is the five pin SOT-23 in this family, so at least one of those rows carries the wrong body column, and the DCQ row that should be the SOT-223 is printed as an SOT-23 as well.
What that means in practice is that the reel label and the certificate are the only reliable statement of what is in the box for this voltage, and that a buyer who assembles the string from a family table is guessing. We ask for the label photograph on every receipt of this family for exactly this reason.
Where this part fits
Defence and medical programmes that need a catalogue regulator with a documented baseline use the enhanced product route for rails feeding synthesizers, references and low noise front ends, where the reverse blocking and the flat ground current matter. Our notes on the paper trail a programme needs are under defense grade components, and the receipt checks we run against the certificate are in sourcing audit trail.
What to check before a purchase order
Check that the EP addendum exists for this string before the order is placed, not after. The enhanced product document defines the qualification and the temperature range, and the standard data sheet does not substitute for it. If the vendor cannot produce the document for the string on the drawing, the programme is buying catalogue silicon with a label, and that is a discussion for the quality function rather than the buyer.
Check the divider and the noise capacitor only if the adjustable member is what the drawing actually calls for. This string is fixed at 2.5 V and has a noise reduction pin at position four, which is a different function from the feedback pin of the adjustable part in the same five pin body. Fitting the adjustable part's divider network on a fixed part puts a resistor from the output to a no connect pin.
Questions that come up on this part
Is the EP part a different die? The vendor documents describe the same regulator with a controlled baseline and additional qualification. No electrical difference is published, and the numbers on this page are the standard silicon numbers.
Can the part run with no output capacitor at all? Yes, that is the family's defining property, and the transient response is specified with and without a capacitor. On a rail that feeds a fast load step a 0.1 microfarad ceramic is still worth the placement.