Contact Us

TPS53679RSBR

Brand: Texas Instruments
Texas Instruments TPS53679RSBR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS53679RSBR — Power Management & Signal Chain | Superb Automation

TPS53679RSBR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS53679RSBR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS53679RSBR: the dual channel VR13 core controller with six plus one phases

TPS53679RSBR is a dual channel step-down controller written to the VR13 server specification for processor core power, with the two channels arranged as six phases plus one or five phases plus two. It carries non volatile memory and a PMBus interface, drives external NexFET stages, and is the core rail counterpart of the memory controller that shares its package and its interface. The body is a 40-pin WQFN measuring 5 mm by 5 mm with a thermal pad, and the reel row on our page is the 3000 piece large reel.

The difference between this controller and the memory controller next to it is the phase split and the current the core rail needs. Six phases on the main channel is what a server processor core draws, and the single phase on the second channel is usually the input output or the uncore rail. A board that swaps one for the other will find the phase arrangement and the VID handling do not match, even though the pin count and the package are the same.

What follows is from SLUSD40, July 2017, and from the packaging addendum: the conversion range, the output ranges, the frequency window, the phase management, the current limit levels, the telemetry and the carrier rows for this tail.

What the order code sits on

Functiondual channel multiphase step-down controller, driverless
SpecificationVR13 server serial VID compliant, backward compatible with VR12.0 and VR12.5
Phase arrangementsix plus one, or five plus two
Conversion range4.5 V to 17 V input
Output range0.25 V to 1.52 V, or 0.5 V to 2.8125 V for the dual channel case
Resolution8 bit converter, selectable 5 mV or 10 mV step
Switching frequency300 kHz to 1 MHz with closed loop frequency control
Configurationnon volatile memory for parameters and defaults
Phase managementdynamic phase shedding with a programmable current threshold
Transientfast phase adding for undershoot reduction
Current limit16 selectable levels per phase with individual phase calibration
TelemetryPMBus for voltage, current, power, temperature and fault conditions
PackageWQFN, 40 pins, 5 mm by 5 mm, thermal pad
Reel3000 pieces on a large reel, 250 on the small reel
Moisture levelLevel-2-260C-1 YEAR
Operating temperatureminus 40 to plus 125 degrees

What the core rail needs that a memory rail does not

A processor core rail moves between voltage levels while the processor is running, and the serial VID interface is what carries the new level. The controller has to change its reference with a controlled slew rate, hold the load line while it moves, and keep the phases balanced through the transition. The dynamic output voltage transition feature with programmable slew rates is the part of the specification that covers this, and it is settable over either the VID interface or PMBus.

The load line is the other difference. A core rail is allowed to droop under load by a defined amount, and that droop is what lets the board get away with fewer output capacitors. The controller sets the droop by its voltage positioning, and the number is tied to the processor's specification rather than to the controller. A board re-populated with a different processor needs that line rechecked, and a controller tuned for one processor is not automatically correct for another.

Six phases exist because of the current. At hundreds of amps the conduction loss in a single stage would be unmanageable, and interleaving six phases reduces the ripple that the capacitors see. The trade is board area and cost: six stages, six inductors and six current sense elements, all of which have to match within the balancing tolerance of the controller.

Phase shedding, adding and balancing together

The three phase management features work as one mechanism. At light load the controller sheds phases so the ones still running sit in their efficient range; when the load rises it adds phases back ahead of the loop response to limit the droop; and the autobalance function keeps the current shared between whichever phases are active. The threshold for shedding is programmable and stored in memory, so it survives a power cycle.

Per phase current calibration is what makes the shedding safe at the boundary. A phase that re-enters service with a different current than its neighbours produces a step in the total current, and the controller compensates by adjusting the on time of each phase. Sixteen levels of current limit are available per phase, and the limit is a per phase setting, which means one phase can be protected more tightly than another when the routing of the board makes one stage run hotter.

The imbalance report is the diagnostic that a factory fixture uses. A board where one phase reports a current that is far from the others has a stage or a sense element that is out of tolerance, and that is visible before the board is in a chassis. Without the report the same board passes a functional test and fails in the field, because the rail still regulates while one stage runs hot.

Telemetry, bias and the shared bus

The PMBus interface carries voltage, current, power, temperature and fault conditions, and it is the same interface the memory controller uses. Both devices can sit on one bus, which is why the address strap matters: two controllers at the same address will collide, and the symptom is intermittent telemetry rather than a hard failure. The strap is set by a pin, and a board that copies the strap from a single controller build will collide on every unit.

The bias is 1.8 V or 3.3 V compatible on this family, and the choice follows the management controller on the board rather than the processor. A dense server board runs its management bus at 1.8 V and a workstation at 3.3 V, and the same controller serves both without a level shifter, which is one fewer part on a bus that already has several loads.

The PMBus is also how a factory writes the configuration. Parameters that would be resistors on an analogue controller are registers here, and they can be stored in non volatile memory as the new defaults. That means a calibration done on the first board is inherited by the rest of the build, and a fixture can verify the configuration by reading it back rather than by measuring a resistor.

Carriers, reels and what the addendum prints

TPS53679RSBRWQFN RSB, 40 pins, 3000 pieces, large reel, active
TPS53679RSBTsame body, 250 pieces, small reel
Lead finishnickel palladium gold with gold flash on the large reel row
Moisture levelLevel-2-260C-1 YEAR, one year floor life
Operating temperatureminus 40 to plus 125 degrees
Part markingTPS53679 across two lines
Body5 mm by 5 mm with thermal pad
DocumentSLUSD40, July 2017

Moisture level 2 with a one year floor life is the handling rule for a production line. A reel opened and left for more than a year needs a bake before reflow, and the bake has to be recorded or the next shift will repeat it. A dry cabinet with a seal date log is the simple answer, and it is what an audit asks to see for any level 2 part on a board.

Where this controller fits today

The applications are VR13 server processor core rails and any ASIC that needs two rails, which is the pair the vendor prints. A board built around a VR13 processor is the natural home, and boards built to later specifications are looking at a later controller with a different VID implementation. The realistic demand here is repair, spare and bridge production for platforms that are still supported.

Replacing this part in the field is a matter of matching the generation first, then the phase arrangement, then the output range. The memory controller from the same family looks compatible and is not, because the phase split and the VID handling differ. The fields are listed on our power management cross reference page, and where a platform is being retired the last time buy and LTB planning page covers how to size the final order against the remaining service life of the product.

Questions buyers ask before a first order

Is this the same device as the TPS53659? No. Both are dual channel VR13 controllers in the same package, and the phase split and the rail they serve differ, which is why one is the core controller and the other is the memory controller.

How many stages does the board need? Six on the main channel and one on the second for the six plus one arrangement, or five and two for the other, and the stages are external.

Can the rail voltage be changed after the board is built? Yes, over the serial VID interface or PMBus, with a programmable slew rate, within the 0.25 V to 1.52 V range of the internal converter.

What is the input range? 4.5 V to 17 V, which covers a 12 V rail with tolerance and a 5 V intermediate bus.