Contact Us

OPA690IDR

Brand: Texas Instruments
Texas Instruments OPA690IDR is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

OPA690IDR — Power Management & Signal Chain | Superb Automation

OPA690IDR

Texas Instruments — Power Management & Signal Chain

Product Overview

The OPA690IDR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

OPA690IDR: current-feedback operational amplifier with 1900 volts per microsecond and 6.1 milliamps of supply current

OPA690IDR is a current-feedback operational amplifier with 1900 volts per microsecond of slew, 220 MHz at a gain of 10 and a 13 nanosecond settling time in a SOIC body of 8 pins. The IDR suffix is the 8-pin SOIC on a 2500 piece reel. The part is unity gain stable at 535 MHz, delivers 220 MHz of small signal bandwidth at a gain of 10 with a 300 MHz gain bandwidth product, slews at 1900 volts per microsecond, settles to 13 nanoseconds and draws 6.1 milliamps on a plus or minus 5 V supply, with second and third harmonic distortion of minus 85 and minus 75 dBc at 5 MHz.

Order code and package

Order codeOPA690IDR
Functioncurrent-feedback operational amplifier, unity gain stable
PackageSOIC, 8 pins, body code D, 2500 piece reel
Supplyplus or minus 5 V nominal
Supply current6.1 milliamps
Small signal bandwidth220 MHz at a gain of 10
Unity gain bandwidth535 MHz
Gain bandwidth product300 MHz
Slew rate1900 volts per microsecond
Settling13 nanoseconds
Distortionminus 85 dBc second and minus 75 dBc third harmonic at 5 MHz
DatasheetOPA690 current-feedback family document

Electrical parameters that decide the application

Voltage noise4.6 nanovolts per root hertz
Output swingplus or minus 3.9 V on a plus or minus 5 V supply into 100 ohms
Input stagecurrent-feedback, so the feedback network sets the bandwidth rather than the gain
Feedback resistora fixed value is required for stability and it is part of the specification
Bandwidth at 0.1 dB25 MHz flatness, specified at a 0.5 V peak to peak output
Headroomabout 1.1 V from each rail at the output before clipping
Operating rangeindustrial, with the junction limit set by the SOIC body

Points to check before this part goes on a BOM

A current-feedback amplifier keeps its bandwidth as the gain rises, and that is the entire reason to choose one. At a gain of 10 this part delivers 220 MHz, where a 300 MHz voltage-feedback part would deliver 30 MHz. The price is that the feedback resistor value, not the gain, sets the compensation: changing it changes the bandwidth and the stability, and a board that substitutes a different value because the calculated one was inconvenient has built a different circuit.

1900 volts per microsecond at a 2 V peak to peak signal gives a full power bandwidth of 151 MHz, so at the gain of 10 where the small signal bandwidth is 220 MHz the slew rate is not yet the limit. At 4 V peak to peak the slew limit falls to 75 MHz and the gain limit still allows 220, so a large signal at high frequency is slew limited. The two curves cross at about 3.5 V peak to peak and that intersection is the useful operating point.

13 nanoseconds of settling is what makes this part usable in a fast ADC driver or a pulse amplifier. A 10 bit converter running at 50 MSPS gives 20 nanoseconds per sample, so a 13 nanosecond settling to the required accuracy leaves almost nothing for the converter's own track and hold. At 20 MSPS the window is 50 nanoseconds and the amplifier fits comfortably, which is the realistic application range.

4.6 nanovolts per root hertz is a quiet input for a current-feedback stage, and it matters because the inverting input of a current-feedback amplifier is the noise gain node. Over a 100 MHz band the integrated noise is 46 microvolts RMS, which is 0.8 of a bit on a 10 bit converter at 2 V full scale. That is the right comparison for a video or IF application, and it shows that the resolution is limited by the band rather than by the amplifier.

6.1 milliamps on plus or minus 5 V is 61 milliwatts, which is modest for 1900 volts per microsecond. The output swing of plus or minus 3.9 V into 100 ohms is 39 milliamps peak, and that load current dominates the dissipation: 3.9 V into 100 ohms is 152 milliwatts in the load and a comparable amount in the output stage, so a board driving a terminated cable is thermally limited by the load rather than by the quiescent current.

The 0.1 dB flatness of 25 MHz is a separate specification from the 220 MHz small signal bandwidth, and it is the one that matters for video. A response that is 3 dB down at 220 MHz can still have 0.5 dB of ripple at 30 MHz, which shows up as a visible change in brightness across a test pattern. The flatness window is quoted at a 0.5 V peak to peak output, so a larger signal has a narrower flat region and the two numbers have to be read together.

Where this order code fits

Video and RGB distribution, CCD pixel buffers, fast pulse and IF stages, ADC drivers above 20 MHz and any circuit that needs a flat response at high gain use this part, because a current-feedback topology keeps its bandwidth as the gain rises, which a voltage-feedback amplifier cannot do. Boards comparing it with a neighbouring part start from our How to Choose an RF Amplifier page, and boards replacing a part that has gone end of life start from the Amplifier Cross Reference page.

Questions buyers ask

Why does the feedback resistor change the bandwidth? Because this is a current-feedback amplifier, and the feedback resistor sets the transimpedance and therefore the compensation. The resistor value in the datasheet is part of the specification, not a suggestion.

Is 220 MHz available at a gain of 1? No. 220 MHz is the bandwidth at a gain of 10; at unity gain the part reaches 535 MHz, and the feedback resistor value that sets stability changes with the configuration.

Can this part drive a 50 ohm load? It can drive 100 ohms to plus or minus 3.9 V, which is 39 milliamps peak. A 50 ohm load doubles that current and the output stage and the package thermal limit become the constraint.

SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the RF Component Sourcing page sets out the checks that keep a substitute from failing on the bench.