Contact Us

INA821IDR

Brand: Texas Instruments
Texas Instruments INA821IDR is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA821IDR — Power Management & Signal Chain | Superb Automation

INA821IDR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA821IDR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA821IDR: the wideband member of the family on a 2500 piece reel

INA821IDR is the wideband member of the precision family in the 8 pin SOIC on a 2500 piece large reel. It keeps the 35 microvolt offset and the 0.4 microvolts per degree of drift, halves the noise to 7 nanovolts per root hertz and raises the bandwidth to 4.7 MHz at unity gain, at 650 microamps maximum of supply current instead of 385.

The gain law is 1 plus 49.4 kilo-ohms divided by the resistor, not the 50 kilo-ohms of the low power members, so a resistor value chosen for one part gives a gain about 1.2 per cent different on this one. For a channel that scans multiplexed inputs or drives a fast converter, the extra 2.7 MHz is what the purchase is for; for a DC bridge at 10 samples per second it is money and current spent for nothing.

INA821IDR as the vendor document publishes it

Offset voltage10 microvolts typical, 35 microvolts maximum
Offset drift0.4 microvolts per degree
Gain equation1 plus 49.4 kilo-ohms divided by the gain resistor
Gain range1 to 10 000 V/V
Gain drift at 15 ppm per degree maximum
Gain drift above 135 ppm per degree maximum
Common mode rejection at a gain of 10112 dB minimum
Power supply rejection at a gain of 1110 dB minimum
Input bias current0.15 nanoamps typical, 0.5 nanoamps maximum
Voltage noise7 nanovolts per root hertz
Bandwidth at a gain of 14.7 MHz
Bandwidth at a gain of 100290 kHz
Stable load capacitance1 nanofarad
Input protection40 volts beyond the supply rails
Supply current650 microamps maximum
Supply range4.5 to 36 volts single, plus or minus 2.25 to plus or minus 18 volts dual
Outputrail to rail
Temperature rangeminus 40 to plus 125 degrees
Vendor statusactive, 2500 piece large reel
Catalogue codeINA821IDR
Vendor stringINA821IDR
MarkingINA821
Lead finishNIPDAU
Moisture levellevel 2, 260 degrees, one year floor life

Four point seven megahertz at unity gain

INA821IDR carries the same 35 microvolt offset and 0.4 microvolts per degree of drift as the low power member of the family, and spends more supply current on bandwidth: 4.7 MHz at unity gain and 290 kHz at a gain of 100, against 2 MHz and 270 kHz on the low power part. The quiescent current rises from 385 to 650 microamps maximum.

That trade is the whole difference between the two codes on a purchase order, and it is decided by the channel rather than by the catalogue. A DC bridge at 10 samples per second gains nothing from 4.7 MHz and loses 265 microamps of budget. A multiplexed module that scans 16 channels, or a channel in front of a converter running at a mega-sample per second, needs the wider part because the settling time after the multiplexer switch dominates the scan.

Seven nanovolts, and the source impedance that goes with it

The voltage noise of INA821IDR is 7 nanovolts per root hertz, one nanovolt better than the low power member, and the bias current is 0.15 nanoamps typical and 0.5 maximum. Seven nanovolts is below the thermal noise of a 3 kilo-ohm resistor, so the source is the dominant noise term for any bridge above that value.

That is the number to use when the channel is compared against a discrete front end. A pair of low noise bipolar transistors with a 10 nanoamp bias current can reach 2 nanovolts, and it needs a 1 kilo-ohm source and a servo to hold its offset. The integrated part reaches 7 nanovolts with 35 microvolts of offset and no servo, which is the right trade for a channel that has to be built once and calibrated never.

Forty volts of protection and the gain law

The inputs of INA821IDR are protected to 40 volts beyond the supply rails, and the gain is 1 plus 49.4 kilo-ohms divided by the resistor between the gain pins, so one resistor covers 1 to 10 000. The 49.4 kilo-ohm value is not the 50 kilo-ohm of the low power member, so a resistor chosen for one part gives a slightly different gain on the other, about 1.2 per cent apart at any gain.

That difference is small enough to look like a rounding error and large enough to matter in a production build: a 499 ohm resistor gives a gain of 101.2 on the 50 kilo-ohm member and 100.0 on this one. The gain drift row is 5 ppm per degree at unity and 35 above unity, so the external resistor again sets the drift, and a 25 ppm resistor doubles it.

A hundred and ten decibels, and the row that differs

The common mode rejection of INA821IDR is 112 dB minimum at a gain of 10, two decibels better than the low power member, and the power supply rejection is 110 dB minimum at unity gain. The two rows are quoted at different gains because the input stage is a different configuration at unity, and the data sheet states that the rejection at unity exceeds 92 dB across the full input window.

Both numbers are large enough that the offset decides the channel rather than the rejection. A 112 dB figure turns a 10 volt common mode into 25 microvolts at the input, which is under the 35 microvolt offset, so a channel with a 24 volt common mode is limited by the same row as a channel with no common mode at all. That is what a precision front end is bought for, and it is also why a 2 dB difference between the two codes rarely decides a purchase.

Six hundred and fifty microamps, and the thermal path

INA821IDR draws 650 microamps maximum from a 4.5 to 36 volt single supply, or a plus or minus 2.25 to plus or minus 18 volt dual supply, and is specified from minus 40 to plus 125 degrees. The supply current is the row that sets the package choice: 650 microamps in an 8 pin SOIC of 4.90 by 3.91 millimetres is a small temperature rise, and the same part in a 3 by 3 millimetre VSSOP or WSON is still inside its rating at 125 degrees ambient.

The current is also the row that makes the part unsuitable for a battery instrument and comfortable on a 24 volt industrial rail, where 650 microamps is a rounding error against the rest of the module. A 4.5 volt floor means a 5 volt rail with a 10 per cent tolerance is inside the specification, and a 36 volt ceiling leaves room above a 24 volt rail with a transient.

Where the wideband member of the family fits

INA821IDR fits a multiplexed industrial input module, a channel in front of a fast converter, a strain gauge or load cell channel that has to settle quickly after a gain change, and a medical front end where the extra bandwidth is needed for an ECG or an EMG channel rather than for a DC measurement.

It stops where the supply is 3.3 volts, because the floor is 4.5 volts, and where the budget is a coin cell, because 650 microamps is not a sleep current. It also stops where the signal is a thermocouple, because 35 microvolts of offset against a 40 microvolt per degree signal needs a chopper rather than a super beta stage. Our amplifier cross reference page covers the family side by side, and the traceability report page covers the documentation that travels with the reel.

The bandwidth and the gain resistor value are the two rows to settle first. Our amplifier cross reference page covers the family side by side, and the BOM scrubbing page covers the resistor value against the bill of materials.

Does a 49.4 kilo-ohm internal resistor change my gain? Yes, by about 1.2 per cent. A 499 ohm resistor gives 101.2 on the 50 kilo-ohm member and 100.0 on this one.

Is the higher current a problem at 125 degrees? The part is specified to 125 degrees ambient at 650 microamps, and the package is 4.90 by 3.91 millimetres, so the rise is small.