Contact Us

INA118PB

Brand: Texas Instruments
Texas Instruments INA118PB is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA118PB — Power Management & Signal Chain | Superb Automation

INA118PB

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA118PB from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA118PB: the B grade low power amplifier in a plastic DIP

The INA118PB is the B grade of the INA118 family in the eight pin plastic DIP. It shares the die and the 350 µA quiescent current with the A grade, and it differs in the offset and drift bin: the family publishes 50 µV of maximum offset and 0.5 µV per degree of drift, and the B row is the one that holds those figures across the temperature range. The rest of the specification is common to the family: 5 nA of maximum bias current, 110 dB of minimum common mode rejection at a gain of 1000, 40 V of input protection, and a supply range from 2.25 V to 18 V.

The status is not recommended for new builds, and the plain and revision rows of this string both read last time buy or NRND in the current addendum. That makes it one of the strings in this family that a customer cannot plan a new product around, and the decision is between a lifetime buy and a board change to the active SOIC B grade.

The INA118PB rows as the addendum publishes them

Part classThree amplifier instrumentation amplifier, B grade, low power
Vendor statusNRND and last time buy across the rows of this string
Data sheetSBOS027C, revised September 2022
Input offset voltage50 µV maximum on the B row
Offset drift0.5 µV per degree maximum
Input bias current5 nA maximum
Common mode rejection at G = 1000110 dB minimum
Input overvoltage protection40 V without damage
Supply range2.25 V to 18 V total
Quiescent current350 µA
Gain equationG = 1 + 50 kΩ divided by RG
Gain range1 to 10,000 V/V
BodyPDIP, P outline, 8 pins
Carrier50 pieces in a tube
RoHSYes
Lead finishNickel palladium gold on the revision row, call the vendor on the plain row
Moisture levelNot applicable to this package type
Temperature rangeMinus 40 to plus 85 degrees
Part markingINA118P
Marking noteThe body marking does not carry the B suffix on this string
Revision rowINA118PB.A, last time buy, and INA118PB.B, NRND
Active alternativeINA118UB in the SOIC body, active

The marking note is the one to read twice. The B grade on this string is identified by the order string and by the tube label, not by a letter on the body, so a rework station cannot tell an A from a B by looking at the package. That is a traceability problem rather than a performance one, and it is the reason a mixed stock of both grades in the same bin is a risk worth avoiding.

What a B grade buys on a low power channel

The B bin is worth its premium when the channel is not trimmed and the full scale is small. At a 10 mV full scale with a 1 per cent target the budget is 100 µV, and the drift over 40 degrees at 0.5 µV per degree is 20 µV, which leaves 80 µV for the initial offset and the source. The A bin can exceed that on a cold unit and the B bin is inside it, which is exactly the case the grade exists for.

At a 1 V full scale the same numbers are a rounding error and the grade premium buys nothing. A customer who asks for the B grade on a 1 V channel is paying for a specification they will never use, and a customer who buys the A grade on a 10 mV channel without a trim is buying a calibration step they have not budgeted for.

The plastic DIP in a socket, and thermal EMF again

A 5 nA bias current is far more tolerant of socket contact resistance than the femtoamp part in the same catalogue, so the socket itself is not the problem here. The problem is the thermal EMF: two dissimilar metal junctions in series with each input, and a temperature gradient across the socket producing a few microvolts per degree. On a 10 mV channel that is a tenth of a per cent per degree, which is worse than the amplifier drift.

The fix is symmetry rather than better contacts. Both inputs should pass through identical contacts, on the same side of the socket, with the same trace length to the connector. The gradient is then common to both paths and cancels in the differential measurement, and the residual is the mismatch between two identical junctions rather than the absolute EMF of one.

Supply and reference at 350 µA

At 350 µA the decoupling requirement is modest, and a 100 nF ceramic at the pin is enough for the supply. What the low current does change is the reference: a divider that would be wasteful on a 3 mA amplifier is affordable here, and a 10 kΩ pair drawing 150 µA from a 3 V rail is 100 times the amplifier current but still within a coin cell budget. The divider should be bypassed with a capacitor to keep the reference impedance low at the frequencies where the loop gain falls.

The output swing at the bottom of the supply range is the constraint. At 2.25 V the amplifier has little headroom, and a unipolar channel needs the reference at half supply to use the converter's range. A customer who plans a 3 V single supply channel has to accept a swing of a few hundred millivolts to each rail rather than a rail to rail output.

Buying INA118PB

The string is last time buy and NRND across its rows, the tube is 50 pieces, and the active alternative is the SOIC B grade. For a socketed instrument the lifetime buy is the practical route, and the quantity is small enough that the storage problem is a shelf rather than a room. For a new board the SOIC part is the only sensible choice.

A buyer should ask for the date code and the tube label photograph on every shipment of this string, because the broker market for an NRND part is where re marked stock appears. A functional test at room temperature will not catch a re marked part on this family; a drift test at the temperature extremes will.

Questions that arrive with this part number

The first is whether the PB is the same die as the P. It is, with a tighter bin, and the marking does not show the difference. The second is whether the part can be substituted with the UB on an existing board. It cannot without a board change, and the change is a board change rather than a wiring one.

The third is whether the last time buy window is still open, and the honest answer is that it changes by the quarter and has to be confirmed with the vendor at the time of the order rather than from a catalogue page.

For a customer planning a lifetime buy, our last time buy planning page sets out the quantities, and the date code page explains how aged stock is screened before it enters a build.

The last time buy quantity should be calculated from the service demand rather than from the production demand, because a socketed board in an instrument that is serviced for a decade consumes parts long after the last unit is built. A service demand of twenty parts a year for ten years is two hundred parts, which is four tubes, and four tubes is a shelf rather than a store. The production demand is added on top of that, and the sum is the quantity to buy before the window closes.

The storability of a plastic DIP over ten years in a sealed bag with a desiccant is good enough that the arithmetic usually favours the lifetime buy over a board revision. What it does not cover is a change in the qualification: a customer whose instrument is audited against a current standard may find that the part's documentation no longer satisfies the auditor, and in that case the board revision is the answer regardless of the stock position.