Contact Us

INA114AU1K

Brand: Texas Instruments
Texas Instruments INA114AU1K is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA114AU1K — Power Management & Signal Chain | Superb Automation

INA114AU1K

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA114AU1K from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA114AU1K: the thousand piece reel of the precision instrumentation amplifier

The INA114AU1K is the reel quantity of the INA114AU, 1000 pieces on a large tape and reel in the 16 pin wide body SOIC. The die is the precision three amplifier instrumentation amplifier with 50 µV of maximum offset at high gain, 0.3 µV per degree of drift, 2 nA of bias current, 115 dB of common mode rejection at a gain of 1000, and 40 V of input protection. The gain equation is 1 plus 50 kΩ over RG, and the range runs from 1 to 10,000.

The string as the vendor prints it carries a slash between the body suffix and the quantity, and the catalogue entry on this page does not. That is a formatting difference rather than a different part, but it is the kind of difference that makes an automated purchase order fail at the vendor's order entry rather than at the customer's desk. The safe form is the one on the addendum.

The INA114AU1K rows as the addendum publishes them

Part classThree amplifier instrumentation amplifier, precision, reel quantity
Vendor statusACTIVE, production data
Data sheetSBOS014B, revised January 2026
Gain equationG = 1 + 50 kΩ divided by RG
Gain range1 to 10,000 V/V
Input offset voltage50 µV maximum at high gain
Offset drift0.3 µV per degree maximum at high gain
Input bias current2 nA maximum
Common mode rejection at G = 1000115 dB minimum
Input overvoltage protection40 V without damage
Supply range2.25 V to 18 V total
BodySOIC, DW outline, 16 pins
Carrier1000 pieces on a large tape and reel
Reel diameter330 millimetres on the large reel rows of this family
RoHSYes
Lead finishNickel palladium gold
Moisture levelLevel 3 at 260 degrees, 168 hour floor life
Temperature rangeMinus 40 to plus 85 degrees
Part markingINA114AU
Revision rowThe same reel row with a revision letter appended
Status of both rowsActive, production data
Quantity arithmetic1000 pieces is 1000 boards at one part per board, or 250 boards at four

The reel row is the first row in this family that carries a moisture level, and level 3 with a 168 hour floor life is the number to plan the material flow around. A reel that is opened on Monday and finished on Friday is inside the window; a reel that is opened for a two day run and then sits on a shelf for a month needs a bake before the next use, and the bake costs more than the difference between a reel and a tube.

Quantity arithmetic that decides the carrier

A reel of 1000 against a tube of 40 is 25 tubes. If a build consumes 400 boards a quarter with one part each, a reel covers two and a half quarters, which means one opening and one floor life window rather than ten. If the same build consumes 40 boards a quarter, the reel covers six years and the part will be discontinued before the reel is empty, which is a different problem: the inventory is a liability and the shelf life is longer than the product life.

The honest rule is that the reel belongs to a programme with a steady volume of at least a few hundred a year, and the tube belongs to everything else. A distributor that quotes the reel to a low volume customer is selling inventory rather than solving a problem, and the customer usually discovers it at the first physical inventory count.

Level 3 handling on a 330 millimetre reel

A 330 millimetre reel does not fit every feeder, and the first thing to check before the order is the machine. A line with a 13 inch feeder takes the reel directly; a line with a smaller feeder needs the reel to be rewound, which is a handling step that breaks the seal and starts the floor life clock. The second thing is the dry pack: the reel arrives in a moisture barrier bag with a humidity indicator card, and the card is the record of whether the bag was intact in transit.

The bake profile is set by the body thickness rather than by the reel, and the vendor publishes the moisture level on the addendum so the line can look it up. What the addendum does not say is how long the parts can sit on a machine between runs, and the practical answer is that a level 3 part exposed for more than 168 hours at 30 degrees and 60 per cent relative humidity needs a bake regardless of how it looks.

Gain resistor selection across a production run

A thousand boards means a thousand gain resistors, and the resistor is where the gain error lives at high gain. A 0.1 per cent part with 25 ppm per degree over a 40 degree excursion contributes 0.1 per cent plus 0.1 per cent, and the amplifier adds its own gain error on top. At a gain of 1000 the sum can reach 0.4 per cent, which is inside a 1 per cent target and outside a 0.25 per cent one. A customer who needs 0.25 per cent at a gain of 1000 has to buy the resistor at 0.05 per cent and 5 ppm, and that part has a lead time of its own.

The placement of that resistor is the production issue rather than the engineering one. A 50 Ω 0402 part placed 5 millimetres from the pins adds 5 nH of trace, which at 1 MHz is 30 mΩ, or 0.06 per cent of the gain term. Multiply by a thousand boards and the variation is in the process, not in the part.

Buying INA114AU1K

The reel is active, the finish is nickel palladium gold, and the moisture level is stated. A purchase order should quote the string exactly as the addendum prints it, with the slash, because the vendor's order entry matches on the full string and a stripped version can fail or, worse, match a different row.

Where a customer needs fewer than a few hundred pieces, the tube is the better buy and the reel is a false economy. Where the volume is there, the reel is the only carrier that keeps a pick and place line running without a tube feeder.

Questions that arrive with this part number

Whether the reel string and the tube string are the same die is the first question, and they are. Whether the reel is 330 millimetres is the second, and it is on the large reel rows of this family, which is what most feeders expect. Whether the slash matters is the third, and it does at order entry.

The fourth is whether a partial reel can be returned to stock. It can, but the floor life clock restarts only if it goes back into a dry pack, and the bag has to be resealed with a fresh desiccant.

For a customer planning a reel purchase, our date code page explains how a partial reel is recorded, and the amplifier cross reference page lists the bodies and carriers we can compare when a reel is not available.

One more handling point on this carrier: the tape pocket size is set by the body and the same tape serves the A and B bins, so a line that runs both grades does not need two feeder setups. That is a small saving and it matters on a mixed build where two grades of the same amplifier are loaded side by side.

The label on the reel carries the quantity, the date code and the country of assembly, and the last of those is the one that decides which fabrication flow the parts came from on a family that has more than one. A customer who has qualified a channel against one flow should record the country of assembly on the first article rather than discovering the difference at a drift test.