Contact Us

CD4042BE

Brand: Texas Instruments
Texas Instruments CD4042BE is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

CD4042BE — Power Management & Signal Chain | Superb Automation

CD4042BE

Texas Instruments — Power Management & Signal Chain

Product Overview

The CD4042BE from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

CD4042BE: four clocked D latches in a 16-lead plastic DIP

CD4042BE is the through-hole member of the CD4042B family, four clocked D-type latches in a 16-lead plastic DIP, 25 pieces to a tube. The vendor descriptor reads CMOS Quad Clocked D Latch, the document is the CD4042B data sheet revision D, and the parametric table gives four channels, standard CMOS inputs, CMOS outputs, an 8 MHz clock frequency, 2.4 mA sink and source, partial power down support and a standard speed classification. The feature line adds high speed and standard speed classifications together, which is the vendor's way of covering two members of the family rather than one measurement.

The addendum lists CD4042BE as Active in production, PDIP (N) with 16 leads, 25 pieces to a tube, RoHS yes with a nickel-palladium-gold finish, no moisture level for the through-hole body, minus 55 to plus 125 degrees, and the marking CD4042BE. The SOIC rows for this family do not follow the BM and BM96 naming that the gates use: the active reel is CD4042BDR at 2500 pieces and the active tube is CD4042BDW at 40 pieces, while CD4042BD and CD4042BDT are both obsolete. The ceramic CD4042BF is NRND.

The CD4042BE row as the vendor addendum publishes it

Part classQuad clocked D latch, polarity selectable
Vendor descriptorCMOS Quad Clocked D Latch
Vendor documentCD4042B data sheet revision D
ChannelsFour latches with a common clock and a common polarity control
Clock frequency, parametric table8 MHz
Output drive, parametric table2.4 mA sink and source
Output typeCMOS, complementary outputs per latch
Supply range3 V to 18 V
Power down behaviourPartial power down supported, input leakage limited when the rail is removed
Package for this codePDIP (N), 16 leads
Packing25 pieces in a tube
Lead finishNIPDAU
Moisture levelNot applicable for this package type
Operating rangeMinus 55 to plus 125 degrees
StatusActive, production
Part markingCD4042BE
SOIC reel rowCD4042BDR, 2500 pieces, marking CD4042BM
SOIC tube rowCD4042BDW, 40 pieces
Obsolete SOIC rowsCD4042BD and CD4042BDT, quantity blank
Ceramic rowCD4042BF, NRND, 25 piece tube, tin lead finish

A latch is not a flip-flop, and the difference shows up at the clock

A latch is transparent while its clock is at the active level: the output follows the data input, and when the clock goes to the inactive level the output holds the last value. A flip-flop samples on an edge and holds immediately. The difference matters in two places. A latch used as a bus hold lets the data through while the clock is active, so any glitch on the data line during that window reaches the output; a flip-flop would sample the level at the edge and ignore the rest.

The advantage of the latch is that it needs no setup time in the same sense, and it can be used as a transparent buffer that becomes a hold with one control line. That is exactly the behaviour a display multiplexer or a keypad scan wants, where the data is allowed to settle through the latch and is then frozen for the read.

The polarity control, and the four latches that share it

Because the four latches share a clock, the part is naturally a four bit capture register: a nibble of a data bus arrives, the clock goes to the hold level, and the four bits stay put while the bus moves on to the next nibble. That is why the part appears in keypad scanners and in display drivers that latch a digit and then multiplex the segments, and it is also why a board that needs to capture four unrelated signals at four different times needs a different part rather than a clever use of the enable.

All four latches share one clock input and one polarity control. The polarity pin selects whether the latch is transparent when the clock is high or when it is low, which lets a circuit choose the active phase without an external inverter. The cost of the shared clock is that the four latches always change together, so the part suits a four bit bus or four independent flags that are sampled at the same instant, and it does not suit four unrelated signals.

The complementary outputs are convenient for driving a differential pair of CMOS inputs and are a hazard if the two are ever wired together. A latch with its outputs shorted draws the short circuit current of both output stages, and at 5 V that is enough to heat the package before the supply current limit acts.

Eight MHz, 2.4 mA and the load that follows

The clock frequency in the parametric table is 8 MHz, which is slower than the 24 MHz of the CD4013B flip-flop and reflects the transparent path through the latch rather than an edge triggered stage. At 2.4 mA the output drive is a third of the gate drive in the same family, so the part drives CMOS inputs comfortably and an LED only at a low current. A board that expects the latch to drive a display segment directly will find the segment dim or the level out of specification.

The partial power down support is worth noting on a board that has several rails. It means the inputs do not load the driving circuit heavily when the latch rail is removed, which is what allows a mixed rail board to keep a latch powered down while the rest of the circuit runs. That behaviour is specified rather than incidental, and it is one of the reasons this part survives in equipment that has a standby rail.

Where the 4042 sits against the 4043 and the 4013

The CD4043B is the set-reset latch version with three state outputs, which suits flags that have to be driven onto a bus rather than data that has to be captured. The CD4013B is the edge triggered flip-flop, which suits counting and division. The CD4042B is the clocked transparent latch, which suits holding a bus value and is the only one of the three that is transparent while the clock is active.

A board that captures four data lines at a moment takes the 4042B. A board that holds four flags set by separate events takes the 4043B. A board that divides a clock takes the 4013B. The three are close in cost, and the choice is made by the timing behaviour rather than by the price.

Incoming checks on a latch

The functional test has to exercise the transparent window as well as the hold, because a latch that holds correctly but does not follow during the window passes a simple hold test and fails on the board. The polarity pin needs its own check at both settings. The body marking separates this DIP from the SOIC rows, whose suffixes are DR and DW rather than the BM and BM96 of the gate family, so a goods in clerk who expects the gate naming will misread the label.

The reference pages are the incoming inspection plan, date code management, and the pin to pin cross reference when a legacy board needs a second source for the latch.

Questions that come up on the 4042

Whether the latch can be used as a flip-flop. It can, if the clock pulse is short and the data is stable, but the result depends on the pulse width rather than on an edge, and a short glitch can pass a wrong value.

Whether the four latches can be clocked separately. They cannot, because the clock and the polarity control are shared across the package.

Whether the part can drive a bus. It can drive a short CMOS bus at 2.4 mA, and a longer bus needs a buffer or the 4043 with its three state outputs.

Whether the ceramic row is available. It is listed as NRND rather than active, which means it is not recommended for new builds and should be confirmed in writing before an order is placed.