Contact Us

CD4002BE

Brand: Texas Instruments
Texas Instruments CD4002BE is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

CD4002BE — Power Management & Signal Chain | Superb Automation

CD4002BE

Texas Instruments — Power Management & Signal Chain

Product Overview

The CD4002BE from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

CD4002BE: two 4-input NOR gates in a 14-lead plastic DIP

CD4002BE is the dual 4-input NOR of the CD4001B family, two independent gates with four inputs each, buffered inputs and outputs, on the 3 V to 18 V CMOS process that the CD4000B series shares. The vendor document is SCHS015C revision C, which covers the CD4001B, the CD4002B and the CD4025B together, and the descriptor on the product page reads two channels, four inputs per channel, 3 V to 18 V. The part exists for one purpose: to fan in four signals in a single gate delay, which a tree of 2-input NORs cannot do.

The addendum lists CD4002BE as Active in production, PDIP (N) with 14 leads, 25 pieces to a tube, RoHS yes with a nickel-palladium-gold finish, no moisture level because the body is through-hole, minus 55 to plus 125 degrees, and the marking CD4002BE. The same document also carries CD4002BF and CD4002BF3A, the ceramic rows that serve the military screening route at the same 25 piece tube, and CD4002BPWR, the TSSOP row at 2000 pieces, so the family is available in three bodies under one document number.

The CD4002BE row as the vendor addendum publishes it

Part classDual 4-input NOR gate, buffered inputs and outputs
Vendor descriptorTwo channels, four inputs per channel, 3 V to 18 V
Vendor documentSCHS015C revision C, CD4001B, CD4002B and CD4025B
Supply range3 V to 18 V
Parametric ratings5 V, 10 V and 15 V tables
Propagation delay, vendor figure60 ns typical at 10 V into a 50 pF load
Output drive, parametric table6.8 mA sink and source
Data rate, parametric table8 Mbps
Input current, maximum1 microamp at 18 V over the full range, 100 nA at 18 V and 25 degrees
Quiescent currentTested to maximum at 20 V on every unit
Noise margin1 V at 5 V, 2 V at 10 V, 2.5 V at 15 V
Package for this codePDIP (N), 14 leads
Packing25 pieces in a tube
Lead finishNIPDAU
Moisture levelNot applicable for this package type
Operating rangeMinus 55 to plus 125 degrees
StatusActive, production
Part markingCD4002BE
Same string in the addendumCD4002BE.A and CD4002BEE4, both 25 piece tube
Ceramic rowsCD4002BF and CD4002BF3A, 25 piece tube, tin lead finish
TSSOP rowCD4002BPWR, 2000 piece reel
Sibling gates in the documentCD4001B four 2-input, CD4025B three 3-input

Why four inputs in one gate is not the same as a tree

A 4-input NOR built from three 2-input NORs needs two levels of gating and, because a NOR of NORs is not a NOR, at least one inverter as well. That costs two gate delays plus the inverter delay, or about 180 ns at 10 V, against 60 ns for the single CD4002B gate. On a slow control circuit that difference rarely matters, but it matters twice over in two places: in a timing chain where several 4-input terms are ORed together, and in a glitch sensitive circuit where the two level tree produces a short output pulse that the single gate does not.

The cost of the single gate is that it consumes four inputs to produce one function. Two such gates in a 14-lead body give eight input terms and two outputs, and a circuit that needs six 2-input functions cannot use the package at all. That is the trade: the CD4002B is the right part when the logic is wide and shallow, and the wrong part when it is narrow and deep.

The DC behaviour on a 5 V and a 12 V rail

At 5 V the part runs with 1 V of guaranteed noise margin, 6.8 mA of drive and a delay that is longer than the 60 ns printed for 10 V. At 12 V the margin is between the 2 V printed for 10 V and the 2.5 V printed for 15 V, and the delay is shorter than the 60 ns figure. The vendor prints the 60 ns number at 10 V into 50 pF and does not print the 5 V or 15 V values on the product page, because those tables sit in the scanned part of the Harris document as images.

The input current is the number that most often decides a circuit around a 4000B gate. At 25 degrees the maximum is 100 nA, so a 1 megohm pull down holds an unused input at 0.1 V and the gate reads it as a low. At 125 degrees the maximum rises to 1 microamp and the same resistor now holds 1 V, which is still a low at a 5 V rail with 1 V of margin but is already marginal at a 3.3 V rail. A circuit that must work over the full range uses a 100 k pull, not a 1 megohm one.

Substituting within the family and outside it

Inside the document the substitutes are the CD4001B when four 2-input gates are more useful than two 4-input gates, and the CD4025B when the fan in is three. All three share the same die process, the same 6.8 mA drive and the same 3 V to 18 V range, so a change between them is a logic change rather than an electrical one. Across vendors the 4002 function is carried by several second sources, and the pinout of the 14-lead body has been stable for decades, which is why the part still appears in repair bills of materials for equipment built in the 1980s.

Outside the 4000B family the nearest equivalent is the 74HC4002, which offers the same function at a lower supply ceiling and a much shorter delay. A board that runs at 5 V and needs speed takes the HC part; a board that runs at 12 V or needs the wide input range takes the CD4002B. Mixing the two families in one circuit is possible at 5 V and needs a threshold check at any other rail.

Incoming checks and the wide fan in risk

A 4-input gate has four opportunities for a bad input, and the most common field failure on this part is not the die but a lifted or cold joint on one of the four input pins, which reads as a stuck input rather than as a dead gate. An incoming function test should exercise each input separately at the rail the board uses, not just apply all four at once. The body marking CD4002BE distinguishes the plastic row from the ceramic CD4002BF, which carries a different lead finish and a different screening route.

The reference pages are the incoming inspection plan, the pin to pin cross reference for the second source question, and the obsolete part cross reference hub when the original vendor of a legacy board no longer stocks the 4002 function.

Questions that come up on the 4-input part

Whether the part can replace a 3-input 4025B. Not directly, because the extra input has to be tied to a defined level, and a tied input on a 4000B gate still draws the leakage current of that pin, which is small but real at high temperature.

Whether unused inputs can be left floating. They cannot. A floating CMOS input sits at an undefined level, draws cross current in the input stage, and can oscillate; every unused input on this part goes to a rail through a resistor or directly.

Whether the DIP body is still the right choice. For repair and prototype work yes, and for a new reflow build the TSSOP row at 2000 pieces is the practical alternative, with the same die and the same electrical numbers.

Whether the 60 ns figure applies at 5 V. It does not, and the correct figure is in the 5 V table of the document rather than on the product page, so a timing budget built at 5 V should carry margin until that table is read.